annotate etc/echo.msg @ 111161:7cae32037c1d

verilog-mode.el updates. This file should be copied to the trunk verbatim. * verilog-mode.el (verilog-directive-re): Make this variable auto-built for efficiency of execution and updating. (verilog-extended-complete-re): Support 'pure' fucntion & task declarations (these have no bodies). (verilog-beg-of-statement): general cleanup to enable support of 'pure' fucntion & task declarations (these have no bodies). These efforts together fix Verilog bug210 from veripool; which was also noticed by Steve Pearlmutter. (verilog-directive-re, verilog-directive-begin, verilog-indent-re) (verilog-directive-nest-re, verilog-set-auto-endcomments): Support `elsif. Reported by Shankar Giri. (verilog-forward-ws&directives, verilog-in-attribute-p): Fixes for attribute handling for lining up declarations and assignments. (verilog-beg-of-statement-1): Fix issue where continued declaration is indented differently if it is after a begin..end clock. (verilog-in-attribute-p, verilog-skip-backward-comments) (verilog-skip-forward-comment-p): Support proper treatment of attributes by indent code. Reported by Jeff Steele. (verilog-in-directive-p): Fix comment to correctly describe function. (verilog-backward-up-list, verilog-in-struct-region-p) (verilog-backward-token, verilog-in-struct-p) (verilog-in-coverage-p, verilog-do-indent) (verilog-pretty-declarations): Use verilog-backward-up-list as wrapper around backward-up-list inorder to properly skip comments. Reported by David Rogoff. (verilog-property-re, verilog-endcomment-reason-re) (verilog-beg-of-statement, verilog-set-auto-endcomments) (verilog-calc-1 ): Fix for assert a; else b; indentation (new form of if). Reported by Max Bjurling and (verilog-calc-1): Fix for clocking block in modport declaration. Reported by Brian Hunter. * verilog-mode.el (verilog-auto-inst, verilog-gate-ios) (verilog-gate-keywords, verilog-read-sub-decls) (verilog-read-sub-decls-gate, verilog-read-sub-decls-gate-ios) (verilog-read-sub-decls-line, verilog-read-sub-decls-sig): Support AUTOINST for gate primitives, bug284. Reported by Mark Johnson. (verilog-read-decls): Fix spaces in V2K module parameters causing mis-identification as interfaces, bug287. (verilog-read-decls): Fix not treating "parameter string" as a parameter in AUTOINSTPARAM. (verilog-read-always-signals-recurse, verilog-read-decls): Fix not treating `elsif similar to `endif inside AUTOSENSE. (verilog-do-indent): Implement correct automatic or static task or function end comment highlight. Reported by Steve Pearlmutter. (verilog-font-lock-keywords-2): Fix highlighting of single character pins, bug264. Reported by Michael Laajanen. (verilog-auto-inst, verilog-read-decls, verilog-read-sub-decls) (verilog-read-sub-decls-in-interfaced, verilog-read-sub-decls-sig) (verilog-subdecls-get-interfaced, verilog-subdecls-new): Support interfaces with AUTOINST, bug270. Reported by Luis Gutierrez. (verilog-pretty-expr): Fix interactive arguments, bug272. Reported by Mark Johnson. (verilog-auto-tieoff, verilog-auto-tieoff-ignore-regexp): Add 'verilog-auto-tieoff-ignore-regexp' for AUTOTIEOFF, bug269. Suggested by Gary Delp. (verilog-mode-map, verilog-preprocess, verilog-preprocess-history) (verilog-preprocessor, verilog-set-compile-command): Create verilog-preprocess and verilog-preprocessor to show preprocessed output. (verilog-get-beg-of-line, verilog-get-end-of-line) (verilog-modi-file-or-buffer, verilog-modi-name) (verilog-modi-point, verilog-within-string): Move defmacro's before first use to avoid warning. Reported by Steve Pearlmutter. (verilog-colorize-buffer, verilog-colorize-include-files-buffer) (verilog-colorize-region, verilog-highlight-buffer) (verilog-highlight-includes, verilog-highlight-modules) (verilog-highlight-region, verilog-mode): Rename colorize to highlight to match other packages. Disable module highlighting, as received speed complaints, reenable for experimentation only using new verilog-highlight-modules. (verilog-read-decls): Fix regexp stack overflow in very large AUTO_TEMPLATEs, bug250. (verilog-auto, verilog-delete-auto, verilog-save-buffer-state) (verilog-scan): Create verilog-save-buffer-state to standardize making insignificant changes that shouldn't call hooks. (verilog-save-no-change-functions, verilog-save-scan-cache) (verilog-scan, verilog-scan-cache-ok-p, verilog-scan-region): Create verilog-save-no-change-functions to wrap verilog-scan preservation, and fix to work with nested preserved calls. (verilog-auto-inst, verilog-auto-inst-dot-name): Support .name port syntax for AUTOWIRE, and with new verilog-auto-inst-dot-name generate .name with AUTOINST, bug245. Suggested by David Rogoff. (verilog-submit-bug-report): Update variable list to be complete. (verilog-auto, verilog-colorize-region): Fix AUTO expansion breaking on-the-fly font-locking. (verilog-colorize-buffer, verilog-colorize-include-files) (verilog-colorize-include-files-buffer, verilog-colorize-region) (verilog-load-file-at-mouse, verilog-load-file-at-point) (verilog-mode, verilog-read-inst-module-matcher): With point on a AUTOINST cell instance name, middle mouse button now finds-file on it. Suggested by Brad Dobbie. (verilog-alw-get-temps, verilog-auto-reset) (verilog-auto-sense-sigs, verilog-read-always-signals) (verilog-read-always-signals-recurse): Fix loop indexes being AUTORESET. AUTORESET now assumes any variables in the initialization section of a for() should be ignored. Reported by Dan Dever. (verilog-error-font-lock-keywords) (verilog-error-regexp-emacs-alist) (verilog-error-regexp-xemacs-alist): Fix error detection of Cadence HAL, reported by David Asher. Repair drift between the three similar error variables. (verilog-modi-lookup, verilog-modi-lookup-cache) (verilog-modi-lookup-last-current, verilog-modi-lookup-last-mod) (verilog-modi-lookup-last-modi, verilog-modi-lookup-last-tick): Fix slow verilog-auto expansion on very large files. (verilog-read-sub-decls-expr, verilog-read-sub-decls-line): Fix AUTOOUTPUT treating "1*2" as a signal name in submodule connection "{1*2{...". Broke in last revision. (verilog-read-sub-decls-expr): Fix AUTOOUTPUT not detecting submodule connections with replications "{#{a},#{b}}".

The Free Software Foundation claims no copyright on this file, taken
from a posting to the public newsgroup net.sources.

Path: mit-amt!mit-eddie!think!harvard!seismo!gatech!akgua!whuxlm!whuxl!houxm!ihnp4!stolaf!umn-cs!herndon
From: [e-mail]
Newsgroups: net.sources
Subject: GNU Echo, Release 1
Message-ID: <[e-mail]>
Date: 28 Oct 85 18:23:00 GMT


/* Written 12:22 pm  Oct 28, 1985 by umn-cs!herndon in umn-cs:net.jokes */
/* ---------- "GNU Echo, Release 1" ---------- */




GNUecho(1)	    UNIX Programmer's Manual	       GNUecho(1)



NAME
     echo - echo arguments

SYNOPSIS
     echo [ options ] ...

DESCRIPTION
     _^HE_^Hc_^Hh_^Ho writes its arguments separated by blanks and terminated
     by	a newline on the standard output.  Options to filter and
     redirect the output are as	follows:

     -2	  generate rhyming couplets from keywords

     -3	  generate Haiku verse from keywords

     -5	  generate limerick from keywords

     -a	  convert ASCII	to ASCII

     -A	  disambiguate sentence	structure

     -b	  generate bureaucratese equivalent (see -x)

     -B	  issue	equivalent C code with bugs fixed

     -c	  simplify/calculate arithmetic	expression(s)

     -C	  remove copyright notice(s)

     -d	  define new echo switch map

     -D	  delete all ownership information from	system files

     -e	  evaluate lisp	expression(s)

     -E	  convert ASCII	to Navajo

     -f	  read input from file

     -F	  transliterate	to french

     -g	  generate pseudo-revolutionary	marxist	catch-phrases

     -G	  prepend GNU manifesto

     -h	  halt system (reboot suppressed on Suns, Apollos, and
	  VAXen, not supported on NOS-2)

     -i	  emulate IBM OS/VU (recursive universes not supported)

     -I	  emulate IBM VTOS 3.7.6 (chronosynclastic infundibulae
	  supported with restrictions documented in IBM	VTOS



Printed	10/28/85	 18 January 1983			1






GNUecho(1)	    UNIX Programmer's Manual	       GNUecho(1)



	  Reference Manual rev 3.2.6)

     -J	  generate junk	mail

     -j	  justify text (see -b option)

     -k	  output "echo"	software tools

     -K	  delete privileged accounts

     -l	  generate legalese equivalent

     -L	  load echo modules

     -M	  generate mail

     -N	  send output to all reachable networks	(usable	with -J,
	  -K, -h options)

     -n	  do not add newline to	the output

     -o	  generate obscene text

     -O	  clean	up dirty language

     -p	  decrypt and print /etc/passwd

     -P	  port echo to all reachable networks

     -P1  oolcay itay

     -q	  query	standard input for arguments

     -r	  read alternate ".echo" file on start up

     -R	  change root password to "RMS"

     -s	  suspend operating system during output (Sun and VAX BSD
	  4.2 only)

     -S	  translate to swahili

     -T	  emulate TCP/IP handler

     -t	  issue	troff output

     -u	  issue	unix philosophy	essay

     -v	  generate reverberating echo

     -V	  print	debugging information




Printed	10/28/85	 18 January 1983			2






GNUecho(1)	    UNIX Programmer's Manual	       GNUecho(1)



     -x	  decrypt DES format messages (NSA secret algorithm CX
	  3.8, not distributed outside continental US)

     _^HE_^Hc_^Hh_^Ho is useful for	producing diagnostics in shell programs
     and for writing constant data on pipes.  To send diagnostics
     to	the standard error file, do `echo ... 1>&2'.

AUTHOR
     Richard M.	Stallman














































Printed	10/28/85	 18 January 1983			3