changeset 11843:3ab3cc97fadc

Updated from ../gpl2lgpl.sed /home/gd/gnu/lib/regex.c
author Roland McGrath <roland@gnu.org>
date Wed, 17 May 1995 20:54:49 +0000
parents e8739cc8cd02
children cacb7820d1c7
files src/regex.c
diffstat 1 files changed, 1 insertions(+), 5391 deletions(-) [+]
line wrap: on
line diff
--- a/src/regex.c	Wed May 17 20:52:45 1995 +0000
+++ b/src/regex.c	Wed May 17 20:54:49 1995 +0000
@@ -3,5395 +3,5 @@
    (Implements POSIX draft P10003.2/D11.2, except for
    internationalization features.)
 
-   Copyright (C) 1993, 1994 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* AIX requires this to be the first thing in the file. */
-#if defined (_AIX) && !defined (REGEX_MALLOC)
-  #pragma alloca
-#endif
-
-#define _GNU_SOURCE
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-/* We need this for `regex.h', and perhaps for the Emacs include files.  */
-#include <sys/types.h>
-
-/* This is for other GNU distributions with internationalized messages.
-   The GNU C Library itself does not yet support such messages.  */
-#if HAVE_LIBINTL_H
-# include <libintl.h>
-#else
-# define gettext(msgid) (msgid)
-#endif
-
-/* The `emacs' switch turns on certain matching commands
-   that make sense only in Emacs. */
-#ifdef emacs
-
-#include "lisp.h"
-#include "buffer.h"
-#include "syntax.h"
-
-#else  /* not emacs */
-
-/* If we are not linking with Emacs proper,
-   we can't use the relocating allocator
-   even if config.h says that we can.  */
-#undef REL_ALLOC
-
-#ifdef STDC_HEADERS
-#include <stdlib.h>
-#else
-char *malloc ();
-char *realloc ();
-#endif
-
-/* We used to test for `BSTRING' here, but only GCC and Emacs define
-   `BSTRING', as far as I know, and neither of them use this code.  */
-#ifndef INHIBIT_STRING_HEADER
-#if HAVE_STRING_H || STDC_HEADERS
-#include <string.h>
-#ifndef bcmp
-#define bcmp(s1, s2, n)	memcmp ((s1), (s2), (n))
-#endif
-#ifndef bcopy
-#define bcopy(s, d, n)	memcpy ((d), (s), (n))
-#endif
-#ifndef bzero
-#define bzero(s, n)	memset ((s), 0, (n))
-#endif
-#else
-#include <strings.h>
-#endif
-#endif
-
-/* Define the syntax stuff for \<, \>, etc.  */
-
-/* This must be nonzero for the wordchar and notwordchar pattern
-   commands in re_match_2.  */
-#ifndef Sword 
-#define Sword 1
-#endif
-
-#ifdef SWITCH_ENUM_BUG
-#define SWITCH_ENUM_CAST(x) ((int)(x))
-#else
-#define SWITCH_ENUM_CAST(x) (x)
-#endif
-
-#ifdef SYNTAX_TABLE
-
-extern char *re_syntax_table;
-
-#else /* not SYNTAX_TABLE */
-
-/* How many characters in the character set.  */
-#define CHAR_SET_SIZE 256
-
-static char re_syntax_table[CHAR_SET_SIZE];
-
-static void
-init_syntax_once ()
-{
-   register int c;
-   static int done = 0;
-
-   if (done)
-     return;
-
-   bzero (re_syntax_table, sizeof re_syntax_table);
-
-   for (c = 'a'; c <= 'z'; c++)
-     re_syntax_table[c] = Sword;
-
-   for (c = 'A'; c <= 'Z'; c++)
-     re_syntax_table[c] = Sword;
-
-   for (c = '0'; c <= '9'; c++)
-     re_syntax_table[c] = Sword;
-
-   re_syntax_table['_'] = Sword;
-
-   done = 1;
-}
-
-#endif /* not SYNTAX_TABLE */
-
-#define SYNTAX(c) re_syntax_table[c]
-
-#endif /* not emacs */
-
-/* Get the interface, including the syntax bits.  */
-#include "regex.h"
-
-/* isalpha etc. are used for the character classes.  */
-#include <ctype.h>
-
-/* Jim Meyering writes:
-
-   "... Some ctype macros are valid only for character codes that
-   isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
-   using /bin/cc or gcc but without giving an ansi option).  So, all
-   ctype uses should be through macros like ISPRINT...  If
-   STDC_HEADERS is defined, then autoconf has verified that the ctype
-   macros don't need to be guarded with references to isascii. ...
-   Defining isascii to 1 should let any compiler worth its salt
-   eliminate the && through constant folding."  */
-
-#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
-#define ISASCII(c) 1
-#else
-#define ISASCII(c) isascii(c)
-#endif
-
-#ifdef isblank
-#define ISBLANK(c) (ISASCII (c) && isblank (c))
-#else
-#define ISBLANK(c) ((c) == ' ' || (c) == '\t')
-#endif
-#ifdef isgraph
-#define ISGRAPH(c) (ISASCII (c) && isgraph (c))
-#else
-#define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
-#endif
-
-#define ISPRINT(c) (ISASCII (c) && isprint (c))
-#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
-#define ISALNUM(c) (ISASCII (c) && isalnum (c))
-#define ISALPHA(c) (ISASCII (c) && isalpha (c))
-#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
-#define ISLOWER(c) (ISASCII (c) && islower (c))
-#define ISPUNCT(c) (ISASCII (c) && ispunct (c))
-#define ISSPACE(c) (ISASCII (c) && isspace (c))
-#define ISUPPER(c) (ISASCII (c) && isupper (c))
-#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
-
-#ifndef NULL
-#define NULL 0
-#endif
-
-/* We remove any previous definition of `SIGN_EXTEND_CHAR',
-   since ours (we hope) works properly with all combinations of
-   machines, compilers, `char' and `unsigned char' argument types.
-   (Per Bothner suggested the basic approach.)  */
-#undef SIGN_EXTEND_CHAR
-#if __STDC__
-#define SIGN_EXTEND_CHAR(c) ((signed char) (c))
-#else  /* not __STDC__ */
-/* As in Harbison and Steele.  */
-#define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
-#endif
-
-/* Should we use malloc or alloca?  If REGEX_MALLOC is not defined, we
-   use `alloca' instead of `malloc'.  This is because using malloc in
-   re_search* or re_match* could cause memory leaks when C-g is used in
-   Emacs; also, malloc is slower and causes storage fragmentation.  On
-   the other hand, malloc is more portable, and easier to debug.  
-   
-   Because we sometimes use alloca, some routines have to be macros,
-   not functions -- `alloca'-allocated space disappears at the end of the
-   function it is called in.  */
-
-#ifdef REGEX_MALLOC
-
-#define REGEX_ALLOCATE malloc
-#define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
-#define REGEX_FREE free
-
-#else /* not REGEX_MALLOC  */
-
-/* Emacs already defines alloca, sometimes.  */
-#ifndef alloca
-
-/* Make alloca work the best possible way.  */
-#ifdef __GNUC__
-#define alloca __builtin_alloca
-#else /* not __GNUC__ */
-#if HAVE_ALLOCA_H
-#include <alloca.h>
-#else /* not __GNUC__ or HAVE_ALLOCA_H */
-#ifndef _AIX /* Already did AIX, up at the top.  */
-char *alloca ();
-#endif /* not _AIX */
-#endif /* not HAVE_ALLOCA_H */ 
-#endif /* not __GNUC__ */
-
-#endif /* not alloca */
-
-#define REGEX_ALLOCATE alloca
-
-/* Assumes a `char *destination' variable.  */
-#define REGEX_REALLOCATE(source, osize, nsize)				\
-  (destination = (char *) alloca (nsize),				\
-   bcopy (source, destination, osize),					\
-   destination)
-
-/* No need to do anything to free, after alloca.  */
-#define REGEX_FREE(arg) (0)
-
-#endif /* not REGEX_MALLOC */
-
-/* Define how to allocate the failure stack.  */
-
-#ifdef REL_ALLOC
-#define REGEX_ALLOCATE_STACK(size)				\
-  r_alloc (&failure_stack_ptr, (size))
-#define REGEX_REALLOCATE_STACK(source, osize, nsize)		\
-  r_re_alloc (&failure_stack_ptr, (nsize))
-#define REGEX_FREE_STACK(ptr)					\
-  r_alloc_free (&failure_stack_ptr)
-
-#else /* not REL_ALLOC */
-
-#ifdef REGEX_MALLOC
-
-#define REGEX_ALLOCATE_STACK malloc
-#define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
-#define REGEX_FREE_STACK free
-
-#else /* not REGEX_MALLOC */
-
-#define REGEX_ALLOCATE_STACK alloca
-
-#define REGEX_REALLOCATE_STACK(source, osize, nsize)			\
-   REGEX_REALLOCATE (source, osize, nsize)
-/* No need to explicitly free anything.  */
-#define REGEX_FREE_STACK(arg)
-
-#endif /* not REGEX_MALLOC */
-#endif /* not REL_ALLOC */
-
-
-/* True if `size1' is non-NULL and PTR is pointing anywhere inside
-   `string1' or just past its end.  This works if PTR is NULL, which is
-   a good thing.  */
-#define FIRST_STRING_P(ptr) 					\
-  (size1 && string1 <= (ptr) && (ptr) <= string1 + size1)
-
-/* (Re)Allocate N items of type T using malloc, or fail.  */
-#define TALLOC(n, t) ((t *) malloc ((n) * sizeof (t)))
-#define RETALLOC(addr, n, t) ((addr) = (t *) realloc (addr, (n) * sizeof (t)))
-#define RETALLOC_IF(addr, n, t) \
-  if (addr) RETALLOC((addr), (n), t); else (addr) = TALLOC ((n), t)
-#define REGEX_TALLOC(n, t) ((t *) REGEX_ALLOCATE ((n) * sizeof (t)))
-
-#define BYTEWIDTH 8 /* In bits.  */
-
-#define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
-
-#undef MAX
-#undef MIN
-#define MAX(a, b) ((a) > (b) ? (a) : (b))
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
-typedef char boolean;
-#define false 0
-#define true 1
-
-static int re_match_2_internal ();
-
-/* These are the command codes that appear in compiled regular
-   expressions.  Some opcodes are followed by argument bytes.  A
-   command code can specify any interpretation whatsoever for its
-   arguments.  Zero bytes may appear in the compiled regular expression.  */
-
-typedef enum
-{
-  no_op = 0,
-
-  /* Succeed right away--no more backtracking.  */
-  succeed,
-
-        /* Followed by one byte giving n, then by n literal bytes.  */
-  exactn,
-
-        /* Matches any (more or less) character.  */
-  anychar,
-
-        /* Matches any one char belonging to specified set.  First
-           following byte is number of bitmap bytes.  Then come bytes
-           for a bitmap saying which chars are in.  Bits in each byte
-           are ordered low-bit-first.  A character is in the set if its
-           bit is 1.  A character too large to have a bit in the map is
-           automatically not in the set.  */
-  charset,
-
-        /* Same parameters as charset, but match any character that is
-           not one of those specified.  */
-  charset_not,
-
-        /* Start remembering the text that is matched, for storing in a
-           register.  Followed by one byte with the register number, in
-           the range 0 to one less than the pattern buffer's re_nsub
-           field.  Then followed by one byte with the number of groups
-           inner to this one.  (This last has to be part of the
-           start_memory only because we need it in the on_failure_jump
-           of re_match_2.)  */
-  start_memory,
-
-        /* Stop remembering the text that is matched and store it in a
-           memory register.  Followed by one byte with the register
-           number, in the range 0 to one less than `re_nsub' in the
-           pattern buffer, and one byte with the number of inner groups,
-           just like `start_memory'.  (We need the number of inner
-           groups here because we don't have any easy way of finding the
-           corresponding start_memory when we're at a stop_memory.)  */
-  stop_memory,
-
-        /* Match a duplicate of something remembered. Followed by one
-           byte containing the register number.  */
-  duplicate,
-
-        /* Fail unless at beginning of line.  */
-  begline,
-
-        /* Fail unless at end of line.  */
-  endline,
-
-        /* Succeeds if at beginning of buffer (if emacs) or at beginning
-           of string to be matched (if not).  */
-  begbuf,
-
-        /* Analogously, for end of buffer/string.  */
-  endbuf,
- 
-        /* Followed by two byte relative address to which to jump.  */
-  jump, 
-
-	/* Same as jump, but marks the end of an alternative.  */
-  jump_past_alt,
-
-        /* Followed by two-byte relative address of place to resume at
-           in case of failure.  */
-  on_failure_jump,
-	
-        /* Like on_failure_jump, but pushes a placeholder instead of the
-           current string position when executed.  */
-  on_failure_keep_string_jump,
-  
-        /* Throw away latest failure point and then jump to following
-           two-byte relative address.  */
-  pop_failure_jump,
-
-        /* Change to pop_failure_jump if know won't have to backtrack to
-           match; otherwise change to jump.  This is used to jump
-           back to the beginning of a repeat.  If what follows this jump
-           clearly won't match what the repeat does, such that we can be
-           sure that there is no use backtracking out of repetitions
-           already matched, then we change it to a pop_failure_jump.
-           Followed by two-byte address.  */
-  maybe_pop_jump,
-
-        /* Jump to following two-byte address, and push a dummy failure
-           point. This failure point will be thrown away if an attempt
-           is made to use it for a failure.  A `+' construct makes this
-           before the first repeat.  Also used as an intermediary kind
-           of jump when compiling an alternative.  */
-  dummy_failure_jump,
-
-	/* Push a dummy failure point and continue.  Used at the end of
-	   alternatives.  */
-  push_dummy_failure,
-
-        /* Followed by two-byte relative address and two-byte number n.
-           After matching N times, jump to the address upon failure.  */
-  succeed_n,
-
-        /* Followed by two-byte relative address, and two-byte number n.
-           Jump to the address N times, then fail.  */
-  jump_n,
-
-        /* Set the following two-byte relative address to the
-           subsequent two-byte number.  The address *includes* the two
-           bytes of number.  */
-  set_number_at,
-
-  wordchar,	/* Matches any word-constituent character.  */
-  notwordchar,	/* Matches any char that is not a word-constituent.  */
-
-  wordbeg,	/* Succeeds if at word beginning.  */
-  wordend,	/* Succeeds if at word end.  */
-
-  wordbound,	/* Succeeds if at a word boundary.  */
-  notwordbound	/* Succeeds if not at a word boundary.  */
-
-#ifdef emacs
-  ,before_dot,	/* Succeeds if before point.  */
-  at_dot,	/* Succeeds if at point.  */
-  after_dot,	/* Succeeds if after point.  */
-
-	/* Matches any character whose syntax is specified.  Followed by
-           a byte which contains a syntax code, e.g., Sword.  */
-  syntaxspec,
-
-	/* Matches any character whose syntax is not that specified.  */
-  notsyntaxspec
-#endif /* emacs */
-} re_opcode_t;
-
-/* Common operations on the compiled pattern.  */
-
-/* Store NUMBER in two contiguous bytes starting at DESTINATION.  */
-
-#define STORE_NUMBER(destination, number)				\
-  do {									\
-    (destination)[0] = (number) & 0377;					\
-    (destination)[1] = (number) >> 8;					\
-  } while (0)
-
-/* Same as STORE_NUMBER, except increment DESTINATION to
-   the byte after where the number is stored.  Therefore, DESTINATION
-   must be an lvalue.  */
-
-#define STORE_NUMBER_AND_INCR(destination, number)			\
-  do {									\
-    STORE_NUMBER (destination, number);					\
-    (destination) += 2;							\
-  } while (0)
-
-/* Put into DESTINATION a number stored in two contiguous bytes starting
-   at SOURCE.  */
-
-#define EXTRACT_NUMBER(destination, source)				\
-  do {									\
-    (destination) = *(source) & 0377;					\
-    (destination) += SIGN_EXTEND_CHAR (*((source) + 1)) << 8;		\
-  } while (0)
-
-#ifdef DEBUG
-static void
-extract_number (dest, source)
-    int *dest;
-    unsigned char *source;
-{
-  int temp = SIGN_EXTEND_CHAR (*(source + 1)); 
-  *dest = *source & 0377;
-  *dest += temp << 8;
-}
-
-#ifndef EXTRACT_MACROS /* To debug the macros.  */
-#undef EXTRACT_NUMBER
-#define EXTRACT_NUMBER(dest, src) extract_number (&dest, src)
-#endif /* not EXTRACT_MACROS */
-
-#endif /* DEBUG */
-
-/* Same as EXTRACT_NUMBER, except increment SOURCE to after the number.
-   SOURCE must be an lvalue.  */
-
-#define EXTRACT_NUMBER_AND_INCR(destination, source)			\
-  do {									\
-    EXTRACT_NUMBER (destination, source);				\
-    (source) += 2; 							\
-  } while (0)
-
-#ifdef DEBUG
-static void
-extract_number_and_incr (destination, source)
-    int *destination;
-    unsigned char **source;
-{ 
-  extract_number (destination, *source);
-  *source += 2;
-}
-
-#ifndef EXTRACT_MACROS
-#undef EXTRACT_NUMBER_AND_INCR
-#define EXTRACT_NUMBER_AND_INCR(dest, src) \
-  extract_number_and_incr (&dest, &src)
-#endif /* not EXTRACT_MACROS */
-
-#endif /* DEBUG */
-
-/* If DEBUG is defined, Regex prints many voluminous messages about what
-   it is doing (if the variable `debug' is nonzero).  If linked with the
-   main program in `iregex.c', you can enter patterns and strings
-   interactively.  And if linked with the main program in `main.c' and
-   the other test files, you can run the already-written tests.  */
-
-#ifdef DEBUG
-
-/* We use standard I/O for debugging.  */
-#include <stdio.h>
-
-/* It is useful to test things that ``must'' be true when debugging.  */
-#include <assert.h>
-
-static int debug = 0;
-
-#define DEBUG_STATEMENT(e) e
-#define DEBUG_PRINT1(x) if (debug) printf (x)
-#define DEBUG_PRINT2(x1, x2) if (debug) printf (x1, x2)
-#define DEBUG_PRINT3(x1, x2, x3) if (debug) printf (x1, x2, x3)
-#define DEBUG_PRINT4(x1, x2, x3, x4) if (debug) printf (x1, x2, x3, x4)
-#define DEBUG_PRINT_COMPILED_PATTERN(p, s, e) 				\
-  if (debug) print_partial_compiled_pattern (s, e)
-#define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)			\
-  if (debug) print_double_string (w, s1, sz1, s2, sz2)
-
-
-/* Print the fastmap in human-readable form.  */
-
-void
-print_fastmap (fastmap)
-    char *fastmap;
-{
-  unsigned was_a_range = 0;
-  unsigned i = 0;  
-  
-  while (i < (1 << BYTEWIDTH))
-    {
-      if (fastmap[i++])
-	{
-	  was_a_range = 0;
-          putchar (i - 1);
-          while (i < (1 << BYTEWIDTH)  &&  fastmap[i])
-            {
-              was_a_range = 1;
-              i++;
-            }
-	  if (was_a_range)
-            {
-              printf ("-");
-              putchar (i - 1);
-            }
-        }
-    }
-  putchar ('\n'); 
-}
-
-
-/* Print a compiled pattern string in human-readable form, starting at
-   the START pointer into it and ending just before the pointer END.  */
-
-void
-print_partial_compiled_pattern (start, end)
-    unsigned char *start;
-    unsigned char *end;
-{
-  int mcnt, mcnt2;
-  unsigned char *p = start;
-  unsigned char *pend = end;
-
-  if (start == NULL)
-    {
-      printf ("(null)\n");
-      return;
-    }
-    
-  /* Loop over pattern commands.  */
-  while (p < pend)
-    {
-      printf ("%d:\t", p - start);
-
-      switch ((re_opcode_t) *p++)
-	{
-        case no_op:
-          printf ("/no_op");
-          break;
-
-	case exactn:
-	  mcnt = *p++;
-          printf ("/exactn/%d", mcnt);
-          do
-	    {
-              putchar ('/');
-	      putchar (*p++);
-            }
-          while (--mcnt);
-          break;
-
-	case start_memory:
-          mcnt = *p++;
-          printf ("/start_memory/%d/%d", mcnt, *p++);
-          break;
-
-	case stop_memory:
-          mcnt = *p++;
-	  printf ("/stop_memory/%d/%d", mcnt, *p++);
-          break;
-
-	case duplicate:
-	  printf ("/duplicate/%d", *p++);
-	  break;
-
-	case anychar:
-	  printf ("/anychar");
-	  break;
-
-	case charset:
-        case charset_not:
-          {
-            register int c, last = -100;
-	    register int in_range = 0;
-
-	    printf ("/charset [%s",
-	            (re_opcode_t) *(p - 1) == charset_not ? "^" : "");
-            
-            assert (p + *p < pend);
-
-            for (c = 0; c < 256; c++)
-	      if (c / 8 < *p
-		  && (p[1 + (c/8)] & (1 << (c % 8))))
-		{
-		  /* Are we starting a range?  */
-		  if (last + 1 == c && ! in_range)
-		    {
-		      putchar ('-');
-		      in_range = 1;
-		    }
-		  /* Have we broken a range?  */
-		  else if (last + 1 != c && in_range)
-              {
-		      putchar (last);
-		      in_range = 0;
-		    }
-                
-		  if (! in_range)
-		    putchar (c);
-
-		  last = c;
-              }
-
-	    if (in_range)
-	      putchar (last);
-
-	    putchar (']');
-
-	    p += 1 + *p;
-	  }
-	  break;
-
-	case begline:
-	  printf ("/begline");
-          break;
-
-	case endline:
-          printf ("/endline");
-          break;
-
-	case on_failure_jump:
-          extract_number_and_incr (&mcnt, &p);
-  	  printf ("/on_failure_jump to %d", p + mcnt - start);
-          break;
-
-	case on_failure_keep_string_jump:
-          extract_number_and_incr (&mcnt, &p);
-  	  printf ("/on_failure_keep_string_jump to %d", p + mcnt - start);
-          break;
-
-	case dummy_failure_jump:
-          extract_number_and_incr (&mcnt, &p);
-  	  printf ("/dummy_failure_jump to %d", p + mcnt - start);
-          break;
-
-	case push_dummy_failure:
-          printf ("/push_dummy_failure");
-          break;
-          
-        case maybe_pop_jump:
-          extract_number_and_incr (&mcnt, &p);
-  	  printf ("/maybe_pop_jump to %d", p + mcnt - start);
-	  break;
-
-        case pop_failure_jump:
-	  extract_number_and_incr (&mcnt, &p);
-  	  printf ("/pop_failure_jump to %d", p + mcnt - start);
-	  break;          
-          
-        case jump_past_alt:
-	  extract_number_and_incr (&mcnt, &p);
-  	  printf ("/jump_past_alt to %d", p + mcnt - start);
-	  break;          
-          
-        case jump:
-	  extract_number_and_incr (&mcnt, &p);
-  	  printf ("/jump to %d", p + mcnt - start);
-	  break;
-
-        case succeed_n: 
-          extract_number_and_incr (&mcnt, &p);
-          extract_number_and_incr (&mcnt2, &p);
-	  printf ("/succeed_n to %d, %d times", p + mcnt - start, mcnt2);
-          break;
-        
-        case jump_n: 
-          extract_number_and_incr (&mcnt, &p);
-          extract_number_and_incr (&mcnt2, &p);
-	  printf ("/jump_n to %d, %d times", p + mcnt - start, mcnt2);
-          break;
-        
-        case set_number_at: 
-          extract_number_and_incr (&mcnt, &p);
-          extract_number_and_incr (&mcnt2, &p);
-	  printf ("/set_number_at location %d to %d", p + mcnt - start, mcnt2);
-          break;
-        
-        case wordbound:
-	  printf ("/wordbound");
-	  break;
-
-	case notwordbound:
-	  printf ("/notwordbound");
-          break;
-
-	case wordbeg:
-	  printf ("/wordbeg");
-	  break;
-          
-	case wordend:
-	  printf ("/wordend");
-          
-#ifdef emacs
-	case before_dot:
-	  printf ("/before_dot");
-          break;
-
-	case at_dot:
-	  printf ("/at_dot");
-          break;
-
-	case after_dot:
-	  printf ("/after_dot");
-          break;
-
-	case syntaxspec:
-          printf ("/syntaxspec");
-	  mcnt = *p++;
-	  printf ("/%d", mcnt);
-          break;
-	  
-	case notsyntaxspec:
-          printf ("/notsyntaxspec");
-	  mcnt = *p++;
-	  printf ("/%d", mcnt);
-	  break;
-#endif /* emacs */
-
-	case wordchar:
-	  printf ("/wordchar");
-          break;
-	  
-	case notwordchar:
-	  printf ("/notwordchar");
-          break;
-
-	case begbuf:
-	  printf ("/begbuf");
-          break;
-
-	case endbuf:
-	  printf ("/endbuf");
-          break;
-
-        default:
-          printf ("?%d", *(p-1));
-	}
-
-      putchar ('\n');
-    }
-
-  printf ("%d:\tend of pattern.\n", p - start);
-}
-
-
-void
-print_compiled_pattern (bufp)
-    struct re_pattern_buffer *bufp;
-{
-  unsigned char *buffer = bufp->buffer;
-
-  print_partial_compiled_pattern (buffer, buffer + bufp->used);
-  printf ("%d bytes used/%d bytes allocated.\n", bufp->used, bufp->allocated);
-
-  if (bufp->fastmap_accurate && bufp->fastmap)
-    {
-      printf ("fastmap: ");
-      print_fastmap (bufp->fastmap);
-    }
-
-  printf ("re_nsub: %d\t", bufp->re_nsub);
-  printf ("regs_alloc: %d\t", bufp->regs_allocated);
-  printf ("can_be_null: %d\t", bufp->can_be_null);
-  printf ("newline_anchor: %d\n", bufp->newline_anchor);
-  printf ("no_sub: %d\t", bufp->no_sub);
-  printf ("not_bol: %d\t", bufp->not_bol);
-  printf ("not_eol: %d\t", bufp->not_eol);
-  printf ("syntax: %d\n", bufp->syntax);
-  /* Perhaps we should print the translate table?  */
-}
-
-
-void
-print_double_string (where, string1, size1, string2, size2)
-    const char *where;
-    const char *string1;
-    const char *string2;
-    int size1;
-    int size2;
-{
-  unsigned this_char;
-  
-  if (where == NULL)
-    printf ("(null)");
-  else
-    {
-      if (FIRST_STRING_P (where))
-        {
-          for (this_char = where - string1; this_char < size1; this_char++)
-            putchar (string1[this_char]);
-
-          where = string2;    
-        }
-
-      for (this_char = where - string2; this_char < size2; this_char++)
-        putchar (string2[this_char]);
-    }
-}
-
-#else /* not DEBUG */
-
-#undef assert
-#define assert(e)
-
-#define DEBUG_STATEMENT(e)
-#define DEBUG_PRINT1(x)
-#define DEBUG_PRINT2(x1, x2)
-#define DEBUG_PRINT3(x1, x2, x3)
-#define DEBUG_PRINT4(x1, x2, x3, x4)
-#define DEBUG_PRINT_COMPILED_PATTERN(p, s, e)
-#define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
-
-#endif /* not DEBUG */
-
-/* Set by `re_set_syntax' to the current regexp syntax to recognize.  Can
-   also be assigned to arbitrarily: each pattern buffer stores its own
-   syntax, so it can be changed between regex compilations.  */
-/* This has no initializer because initialized variables in Emacs
-   become read-only after dumping.  */
-reg_syntax_t re_syntax_options;
-
-
-/* Specify the precise syntax of regexps for compilation.  This provides
-   for compatibility for various utilities which historically have
-   different, incompatible syntaxes.
-
-   The argument SYNTAX is a bit mask comprised of the various bits
-   defined in regex.h.  We return the old syntax.  */
-
-reg_syntax_t
-re_set_syntax (syntax)
-    reg_syntax_t syntax;
-{
-  reg_syntax_t ret = re_syntax_options;
-  
-  re_syntax_options = syntax;
-  return ret;
-}
-
-/* This table gives an error message for each of the error codes listed
-   in regex.h.  Obviously the order here has to be same as there.
-   POSIX doesn't require that we do anything for REG_NOERROR,
-   but why not be nice?  */
-
-static const char *re_error_msgid[] =
-  { "Success",					/* REG_NOERROR */
-    "No match",					/* REG_NOMATCH */
-    "Invalid regular expression",		/* REG_BADPAT */
-    "Invalid collation character",		/* REG_ECOLLATE */
-    "Invalid character class name",		/* REG_ECTYPE */
-    "Trailing backslash",			/* REG_EESCAPE */
-    "Invalid back reference",			/* REG_ESUBREG */
-    "Unmatched [ or [^",			/* REG_EBRACK */
-    "Unmatched ( or \\(",			/* REG_EPAREN */
-    "Unmatched \\{",				/* REG_EBRACE */
-    "Invalid content of \\{\\}",		/* REG_BADBR */
-    "Invalid range end",			/* REG_ERANGE */
-    "Memory exhausted",				/* REG_ESPACE */
-    "Invalid preceding regular expression",	/* REG_BADRPT */
-    "Premature end of regular expression",	/* REG_EEND */
-    "Regular expression too big",		/* REG_ESIZE */
-    "Unmatched ) or \\)",			/* REG_ERPAREN */
-  };
-
-/* Avoiding alloca during matching, to placate r_alloc.  */
-
-/* Define MATCH_MAY_ALLOCATE unless we need to make sure that the
-   searching and matching functions should not call alloca.  On some
-   systems, alloca is implemented in terms of malloc, and if we're
-   using the relocating allocator routines, then malloc could cause a
-   relocation, which might (if the strings being searched are in the
-   ralloc heap) shift the data out from underneath the regexp
-   routines.
-
-   Here's another reason to avoid allocation: Emacs 
-   processes input from X in a signal handler; processing X input may
-   call malloc; if input arrives while a matching routine is calling
-   malloc, then we're scrod.  But Emacs can't just block input while
-   calling matching routines; then we don't notice interrupts when
-   they come in.  So, Emacs blocks input around all regexp calls
-   except the matching calls, which it leaves unprotected, in the
-   faith that they will not malloc.  */
-
-/* Normally, this is fine.  */
-#define MATCH_MAY_ALLOCATE
-
-/* When using GNU C, we are not REALLY using the C alloca, no matter
-   what config.h may say.  So don't take precautions for it.  */
-#ifdef __GNUC__
-#undef C_ALLOCA
-#endif
-
-/* The match routines may not allocate if (1) they would do it with malloc
-   and (2) it's not safe for them to use malloc.
-   Note that if REL_ALLOC is defined, matching would not use malloc for the
-   failure stack, but we would still use it for the register vectors;
-   so REL_ALLOC should not affect this.  */
-#if (defined (C_ALLOCA) || defined (REGEX_MALLOC)) && defined (emacs)
-#undef MATCH_MAY_ALLOCATE
-#endif
-
-
-/* Failure stack declarations and macros; both re_compile_fastmap and
-   re_match_2 use a failure stack.  These have to be macros because of
-   REGEX_ALLOCATE_STACK.  */
-   
-
-/* Number of failure points for which to initially allocate space
-   when matching.  If this number is exceeded, we allocate more
-   space, so it is not a hard limit.  */
-#ifndef INIT_FAILURE_ALLOC
-#define INIT_FAILURE_ALLOC 5
-#endif
-
-/* Roughly the maximum number of failure points on the stack.  Would be
-   exactly that if always used MAX_FAILURE_SPACE each time we failed.
-   This is a variable only so users of regex can assign to it; we never
-   change it ourselves.  */
-#if defined (MATCH_MAY_ALLOCATE)
-int re_max_failures = 200000;
-#else
-int re_max_failures = 2000;
-#endif
-
-union fail_stack_elt
-{
-  unsigned char *pointer;
-  int integer;
-};
-
-typedef union fail_stack_elt fail_stack_elt_t;
-
-typedef struct
-{
-  fail_stack_elt_t *stack;
-  unsigned size;
-  unsigned avail;			/* Offset of next open position.  */
-} fail_stack_type;
-
-#define FAIL_STACK_EMPTY()     (fail_stack.avail == 0)
-#define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
-#define FAIL_STACK_FULL()      (fail_stack.avail == fail_stack.size)
-
-
-/* Define macros to initialize and free the failure stack.
-   Do `return -2' if the alloc fails.  */
-
-#ifdef MATCH_MAY_ALLOCATE
-#define INIT_FAIL_STACK()						\
-  do {									\
-    fail_stack.stack = (fail_stack_elt_t *)				\
-      REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t));	\
-									\
-    if (fail_stack.stack == NULL)					\
-      return -2;							\
-									\
-    fail_stack.size = INIT_FAILURE_ALLOC;				\
-    fail_stack.avail = 0;						\
-  } while (0)
-
-#define RESET_FAIL_STACK()  REGEX_FREE_STACK (fail_stack.stack)
-#else
-#define INIT_FAIL_STACK()						\
-  do {									\
-    fail_stack.avail = 0;						\
-  } while (0)
-
-#define RESET_FAIL_STACK()
-#endif
-
-
-/* Double the size of FAIL_STACK, up to approximately `re_max_failures' items.
-
-   Return 1 if succeeds, and 0 if either ran out of memory
-   allocating space for it or it was already too large.  
-   
-   REGEX_REALLOCATE_STACK requires `destination' be declared.   */
-
-#define DOUBLE_FAIL_STACK(fail_stack)					\
-  ((fail_stack).size > re_max_failures * MAX_FAILURE_ITEMS		\
-   ? 0									\
-   : ((fail_stack).stack = (fail_stack_elt_t *)				\
-        REGEX_REALLOCATE_STACK ((fail_stack).stack, 			\
-          (fail_stack).size * sizeof (fail_stack_elt_t),		\
-          ((fail_stack).size << 1) * sizeof (fail_stack_elt_t)),	\
-									\
-      (fail_stack).stack == NULL					\
-      ? 0								\
-      : ((fail_stack).size <<= 1, 					\
-         1)))
-
-
-/* Push pointer POINTER on FAIL_STACK. 
-   Return 1 if was able to do so and 0 if ran out of memory allocating
-   space to do so.  */
-#define PUSH_PATTERN_OP(POINTER, FAIL_STACK)				\
-  ((FAIL_STACK_FULL ()							\
-    && !DOUBLE_FAIL_STACK (FAIL_STACK))					\
-   ? 0									\
-   : ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER,	\
-      1))
-
-/* Push a pointer value onto the failure stack.
-   Assumes the variable `fail_stack'.  Probably should only
-   be called from within `PUSH_FAILURE_POINT'.  */
-#define PUSH_FAILURE_POINTER(item)					\
-  fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
-
-/* This pushes an integer-valued item onto the failure stack.
-   Assumes the variable `fail_stack'.  Probably should only
-   be called from within `PUSH_FAILURE_POINT'.  */
-#define PUSH_FAILURE_INT(item)					\
-  fail_stack.stack[fail_stack.avail++].integer = (item)
-
-/* Push a fail_stack_elt_t value onto the failure stack.
-   Assumes the variable `fail_stack'.  Probably should only
-   be called from within `PUSH_FAILURE_POINT'.  */
-#define PUSH_FAILURE_ELT(item)					\
-  fail_stack.stack[fail_stack.avail++] =  (item)
-
-/* These three POP... operations complement the three PUSH... operations.
-   All assume that `fail_stack' is nonempty.  */
-#define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
-#define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
-#define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
-
-/* Used to omit pushing failure point id's when we're not debugging.  */
-#ifdef DEBUG
-#define DEBUG_PUSH PUSH_FAILURE_INT
-#define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
-#else
-#define DEBUG_PUSH(item)
-#define DEBUG_POP(item_addr)
-#endif
-
-
-/* Push the information about the state we will need
-   if we ever fail back to it.  
-   
-   Requires variables fail_stack, regstart, regend, reg_info, and
-   num_regs be declared.  DOUBLE_FAIL_STACK requires `destination' be
-   declared.
-   
-   Does `return FAILURE_CODE' if runs out of memory.  */
-
-#define PUSH_FAILURE_POINT(pattern_place, string_place, failure_code)	\
-  do {									\
-    char *destination;							\
-    /* Must be int, so when we don't save any registers, the arithmetic	\
-       of 0 + -1 isn't done as unsigned.  */				\
-    int this_reg;							\
-    									\
-    DEBUG_STATEMENT (failure_id++);					\
-    DEBUG_STATEMENT (nfailure_points_pushed++);				\
-    DEBUG_PRINT2 ("\nPUSH_FAILURE_POINT #%u:\n", failure_id);		\
-    DEBUG_PRINT2 ("  Before push, next avail: %d\n", (fail_stack).avail);\
-    DEBUG_PRINT2 ("                     size: %d\n", (fail_stack).size);\
-									\
-    DEBUG_PRINT2 ("  slots needed: %d\n", NUM_FAILURE_ITEMS);		\
-    DEBUG_PRINT2 ("     available: %d\n", REMAINING_AVAIL_SLOTS);	\
-									\
-    /* Ensure we have enough space allocated for what we will push.  */	\
-    while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS)			\
-      {									\
-        if (!DOUBLE_FAIL_STACK (fail_stack))				\
-          return failure_code;						\
-									\
-        DEBUG_PRINT2 ("\n  Doubled stack; size now: %d\n",		\
-		       (fail_stack).size);				\
-        DEBUG_PRINT2 ("  slots available: %d\n", REMAINING_AVAIL_SLOTS);\
-      }									\
-									\
-    /* Push the info, starting with the registers.  */			\
-    DEBUG_PRINT1 ("\n");						\
-									\
-    for (this_reg = lowest_active_reg; this_reg <= highest_active_reg;	\
-         this_reg++)							\
-      {									\
-	DEBUG_PRINT2 ("  Pushing reg: %d\n", this_reg);			\
-        DEBUG_STATEMENT (num_regs_pushed++);				\
-									\
-	DEBUG_PRINT2 ("    start: 0x%x\n", regstart[this_reg]);		\
-        PUSH_FAILURE_POINTER (regstart[this_reg]);			\
-                                                                        \
-	DEBUG_PRINT2 ("    end: 0x%x\n", regend[this_reg]);		\
-        PUSH_FAILURE_POINTER (regend[this_reg]);			\
-									\
-	DEBUG_PRINT2 ("    info: 0x%x\n      ", reg_info[this_reg]);	\
-        DEBUG_PRINT2 (" match_null=%d",					\
-                      REG_MATCH_NULL_STRING_P (reg_info[this_reg]));	\
-        DEBUG_PRINT2 (" active=%d", IS_ACTIVE (reg_info[this_reg]));	\
-        DEBUG_PRINT2 (" matched_something=%d",				\
-                      MATCHED_SOMETHING (reg_info[this_reg]));		\
-        DEBUG_PRINT2 (" ever_matched=%d",				\
-                      EVER_MATCHED_SOMETHING (reg_info[this_reg]));	\
-	DEBUG_PRINT1 ("\n");						\
-        PUSH_FAILURE_ELT (reg_info[this_reg].word);			\
-      }									\
-									\
-    DEBUG_PRINT2 ("  Pushing  low active reg: %d\n", lowest_active_reg);\
-    PUSH_FAILURE_INT (lowest_active_reg);				\
-									\
-    DEBUG_PRINT2 ("  Pushing high active reg: %d\n", highest_active_reg);\
-    PUSH_FAILURE_INT (highest_active_reg);				\
-									\
-    DEBUG_PRINT2 ("  Pushing pattern 0x%x: ", pattern_place);		\
-    DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend);		\
-    PUSH_FAILURE_POINTER (pattern_place);				\
-									\
-    DEBUG_PRINT2 ("  Pushing string 0x%x: `", string_place);		\
-    DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2,   \
-				 size2);				\
-    DEBUG_PRINT1 ("'\n");						\
-    PUSH_FAILURE_POINTER (string_place);				\
-									\
-    DEBUG_PRINT2 ("  Pushing failure id: %u\n", failure_id);		\
-    DEBUG_PUSH (failure_id);						\
-  } while (0)
-
-/* This is the number of items that are pushed and popped on the stack
-   for each register.  */
-#define NUM_REG_ITEMS  3
-
-/* Individual items aside from the registers.  */
-#ifdef DEBUG
-#define NUM_NONREG_ITEMS 5 /* Includes failure point id.  */
-#else
-#define NUM_NONREG_ITEMS 4
-#endif
-
-/* We push at most this many items on the stack.  */
-#define MAX_FAILURE_ITEMS ((num_regs - 1) * NUM_REG_ITEMS + NUM_NONREG_ITEMS)
-
-/* We actually push this many items.  */
-#define NUM_FAILURE_ITEMS						\
-  ((highest_active_reg - lowest_active_reg + 1) * NUM_REG_ITEMS 	\
-    + NUM_NONREG_ITEMS)
-
-/* How many items can still be added to the stack without overflowing it.  */
-#define REMAINING_AVAIL_SLOTS ((fail_stack).size - (fail_stack).avail)
-
-
-/* Pops what PUSH_FAIL_STACK pushes.
-
-   We restore into the parameters, all of which should be lvalues:
-     STR -- the saved data position.
-     PAT -- the saved pattern position.
-     LOW_REG, HIGH_REG -- the highest and lowest active registers.
-     REGSTART, REGEND -- arrays of string positions.
-     REG_INFO -- array of information about each subexpression.
-   
-   Also assumes the variables `fail_stack' and (if debugging), `bufp',
-   `pend', `string1', `size1', `string2', and `size2'.  */
-
-#define POP_FAILURE_POINT(str, pat, low_reg, high_reg, regstart, regend, reg_info)\
-{									\
-  DEBUG_STATEMENT (fail_stack_elt_t failure_id;)			\
-  int this_reg;								\
-  const unsigned char *string_temp;					\
-									\
-  assert (!FAIL_STACK_EMPTY ());					\
-									\
-  /* Remove failure points and point to how many regs pushed.  */	\
-  DEBUG_PRINT1 ("POP_FAILURE_POINT:\n");				\
-  DEBUG_PRINT2 ("  Before pop, next avail: %d\n", fail_stack.avail);	\
-  DEBUG_PRINT2 ("                    size: %d\n", fail_stack.size);	\
-									\
-  assert (fail_stack.avail >= NUM_NONREG_ITEMS);			\
-									\
-  DEBUG_POP (&failure_id);						\
-  DEBUG_PRINT2 ("  Popping failure id: %u\n", failure_id);		\
-									\
-  /* If the saved string location is NULL, it came from an		\
-     on_failure_keep_string_jump opcode, and we want to throw away the	\
-     saved NULL, thus retaining our current position in the string.  */	\
-  string_temp = POP_FAILURE_POINTER ();					\
-  if (string_temp != NULL)						\
-    str = (const char *) string_temp;					\
-									\
-  DEBUG_PRINT2 ("  Popping string 0x%x: `", str);			\
-  DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2);	\
-  DEBUG_PRINT1 ("'\n");							\
-									\
-  pat = (unsigned char *) POP_FAILURE_POINTER ();			\
-  DEBUG_PRINT2 ("  Popping pattern 0x%x: ", pat);			\
-  DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend);			\
-									\
-  /* Restore register info.  */						\
-  high_reg = (unsigned) POP_FAILURE_INT ();				\
-  DEBUG_PRINT2 ("  Popping high active reg: %d\n", high_reg);		\
-									\
-  low_reg = (unsigned) POP_FAILURE_INT ();				\
-  DEBUG_PRINT2 ("  Popping  low active reg: %d\n", low_reg);		\
-									\
-  for (this_reg = high_reg; this_reg >= low_reg; this_reg--)		\
-    {									\
-      DEBUG_PRINT2 ("    Popping reg: %d\n", this_reg);			\
-									\
-      reg_info[this_reg].word = POP_FAILURE_ELT ();			\
-      DEBUG_PRINT2 ("      info: 0x%x\n", reg_info[this_reg]);		\
-									\
-      regend[this_reg] = (const char *) POP_FAILURE_POINTER ();		\
-      DEBUG_PRINT2 ("      end: 0x%x\n", regend[this_reg]);		\
-									\
-      regstart[this_reg] = (const char *) POP_FAILURE_POINTER ();	\
-      DEBUG_PRINT2 ("      start: 0x%x\n", regstart[this_reg]);		\
-    }									\
-									\
-  set_regs_matched_done = 0;						\
-  DEBUG_STATEMENT (nfailure_points_popped++);				\
-} /* POP_FAILURE_POINT */
-
-
-
-/* Structure for per-register (a.k.a. per-group) information.
-   Other register information, such as the
-   starting and ending positions (which are addresses), and the list of
-   inner groups (which is a bits list) are maintained in separate
-   variables.  
-   
-   We are making a (strictly speaking) nonportable assumption here: that
-   the compiler will pack our bit fields into something that fits into
-   the type of `word', i.e., is something that fits into one item on the
-   failure stack.  */
-
-typedef union
-{
-  fail_stack_elt_t word;
-  struct
-  {
-      /* This field is one if this group can match the empty string,
-         zero if not.  If not yet determined,  `MATCH_NULL_UNSET_VALUE'.  */
-#define MATCH_NULL_UNSET_VALUE 3
-    unsigned match_null_string_p : 2;
-    unsigned is_active : 1;
-    unsigned matched_something : 1;
-    unsigned ever_matched_something : 1;
-  } bits;
-} register_info_type;
-
-#define REG_MATCH_NULL_STRING_P(R)  ((R).bits.match_null_string_p)
-#define IS_ACTIVE(R)  ((R).bits.is_active)
-#define MATCHED_SOMETHING(R)  ((R).bits.matched_something)
-#define EVER_MATCHED_SOMETHING(R)  ((R).bits.ever_matched_something)
-
-
-/* Call this when have matched a real character; it sets `matched' flags
-   for the subexpressions which we are currently inside.  Also records
-   that those subexprs have matched.  */
-#define SET_REGS_MATCHED()						\
-  do									\
-    {									\
-      if (!set_regs_matched_done)					\
-	{								\
-	  unsigned r;							\
-	  set_regs_matched_done = 1;					\
-	  for (r = lowest_active_reg; r <= highest_active_reg; r++)	\
-	    {								\
-	      MATCHED_SOMETHING (reg_info[r])				\
-		= EVER_MATCHED_SOMETHING (reg_info[r])			\
-		= 1;							\
-	    }								\
-	}								\
-    }									\
-  while (0)
-
-/* Registers are set to a sentinel when they haven't yet matched.  */
-static char reg_unset_dummy;
-#define REG_UNSET_VALUE (&reg_unset_dummy)
-#define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
-
-/* Subroutine declarations and macros for regex_compile.  */
-
-static void store_op1 (), store_op2 ();
-static void insert_op1 (), insert_op2 ();
-static boolean at_begline_loc_p (), at_endline_loc_p ();
-static boolean group_in_compile_stack ();
-static reg_errcode_t compile_range ();
-
-/* Fetch the next character in the uncompiled pattern---translating it 
-   if necessary.  Also cast from a signed character in the constant
-   string passed to us by the user to an unsigned char that we can use
-   as an array index (in, e.g., `translate').  */
-#define PATFETCH(c)							\
-  do {if (p == pend) return REG_EEND;					\
-    c = (unsigned char) *p++;						\
-    if (translate) c = translate[c]; 					\
-  } while (0)
-
-/* Fetch the next character in the uncompiled pattern, with no
-   translation.  */
-#define PATFETCH_RAW(c)							\
-  do {if (p == pend) return REG_EEND;					\
-    c = (unsigned char) *p++; 						\
-  } while (0)
-
-/* Go backwards one character in the pattern.  */
-#define PATUNFETCH p--
-
-
-/* If `translate' is non-null, return translate[D], else just D.  We
-   cast the subscript to translate because some data is declared as
-   `char *', to avoid warnings when a string constant is passed.  But
-   when we use a character as a subscript we must make it unsigned.  */
-#define TRANSLATE(d) (translate ? translate[(unsigned char) (d)] : (d))
-
-
-/* Macros for outputting the compiled pattern into `buffer'.  */
-
-/* If the buffer isn't allocated when it comes in, use this.  */
-#define INIT_BUF_SIZE  32
-
-/* Make sure we have at least N more bytes of space in buffer.  */
-#define GET_BUFFER_SPACE(n)						\
-    while (b - bufp->buffer + (n) > bufp->allocated)			\
-      EXTEND_BUFFER ()
-
-/* Make sure we have one more byte of buffer space and then add C to it.  */
-#define BUF_PUSH(c)							\
-  do {									\
-    GET_BUFFER_SPACE (1);						\
-    *b++ = (unsigned char) (c);						\
-  } while (0)
-
-
-/* Ensure we have two more bytes of buffer space and then append C1 and C2.  */
-#define BUF_PUSH_2(c1, c2)						\
-  do {									\
-    GET_BUFFER_SPACE (2);						\
-    *b++ = (unsigned char) (c1);					\
-    *b++ = (unsigned char) (c2);					\
-  } while (0)
-
-
-/* As with BUF_PUSH_2, except for three bytes.  */
-#define BUF_PUSH_3(c1, c2, c3)						\
-  do {									\
-    GET_BUFFER_SPACE (3);						\
-    *b++ = (unsigned char) (c1);					\
-    *b++ = (unsigned char) (c2);					\
-    *b++ = (unsigned char) (c3);					\
-  } while (0)
-
-
-/* Store a jump with opcode OP at LOC to location TO.  We store a
-   relative address offset by the three bytes the jump itself occupies.  */
-#define STORE_JUMP(op, loc, to) \
-  store_op1 (op, loc, (to) - (loc) - 3)
-
-/* Likewise, for a two-argument jump.  */
-#define STORE_JUMP2(op, loc, to, arg) \
-  store_op2 (op, loc, (to) - (loc) - 3, arg)
-
-/* Like `STORE_JUMP', but for inserting.  Assume `b' is the buffer end.  */
-#define INSERT_JUMP(op, loc, to) \
-  insert_op1 (op, loc, (to) - (loc) - 3, b)
-
-/* Like `STORE_JUMP2', but for inserting.  Assume `b' is the buffer end.  */
-#define INSERT_JUMP2(op, loc, to, arg) \
-  insert_op2 (op, loc, (to) - (loc) - 3, arg, b)
-
-
-/* This is not an arbitrary limit: the arguments which represent offsets
-   into the pattern are two bytes long.  So if 2^16 bytes turns out to
-   be too small, many things would have to change.  */
-#define MAX_BUF_SIZE (1L << 16)
-
-
-/* Extend the buffer by twice its current size via realloc and
-   reset the pointers that pointed into the old block to point to the
-   correct places in the new one.  If extending the buffer results in it
-   being larger than MAX_BUF_SIZE, then flag memory exhausted.  */
-#define EXTEND_BUFFER()							\
-  do { 									\
-    unsigned char *old_buffer = bufp->buffer;				\
-    if (bufp->allocated == MAX_BUF_SIZE) 				\
-      return REG_ESIZE;							\
-    bufp->allocated <<= 1;						\
-    if (bufp->allocated > MAX_BUF_SIZE)					\
-      bufp->allocated = MAX_BUF_SIZE; 					\
-    bufp->buffer = (unsigned char *) realloc (bufp->buffer, bufp->allocated);\
-    if (bufp->buffer == NULL)						\
-      return REG_ESPACE;						\
-    /* If the buffer moved, move all the pointers into it.  */		\
-    if (old_buffer != bufp->buffer)					\
-      {									\
-        b = (b - old_buffer) + bufp->buffer;				\
-        begalt = (begalt - old_buffer) + bufp->buffer;			\
-        if (fixup_alt_jump)						\
-          fixup_alt_jump = (fixup_alt_jump - old_buffer) + bufp->buffer;\
-        if (laststart)							\
-          laststart = (laststart - old_buffer) + bufp->buffer;		\
-        if (pending_exact)						\
-          pending_exact = (pending_exact - old_buffer) + bufp->buffer;	\
-      }									\
-  } while (0)
-
-
-/* Since we have one byte reserved for the register number argument to
-   {start,stop}_memory, the maximum number of groups we can report
-   things about is what fits in that byte.  */
-#define MAX_REGNUM 255
-
-/* But patterns can have more than `MAX_REGNUM' registers.  We just
-   ignore the excess.  */
-typedef unsigned regnum_t;
-
-
-/* Macros for the compile stack.  */
-
-/* Since offsets can go either forwards or backwards, this type needs to
-   be able to hold values from -(MAX_BUF_SIZE - 1) to MAX_BUF_SIZE - 1.  */
-typedef int pattern_offset_t;
-
-typedef struct
-{
-  pattern_offset_t begalt_offset;
-  pattern_offset_t fixup_alt_jump;
-  pattern_offset_t inner_group_offset;
-  pattern_offset_t laststart_offset;  
-  regnum_t regnum;
-} compile_stack_elt_t;
-
-
-typedef struct
-{
-  compile_stack_elt_t *stack;
-  unsigned size;
-  unsigned avail;			/* Offset of next open position.  */
-} compile_stack_type;
-
-
-#define INIT_COMPILE_STACK_SIZE 32
-
-#define COMPILE_STACK_EMPTY  (compile_stack.avail == 0)
-#define COMPILE_STACK_FULL  (compile_stack.avail == compile_stack.size)
-
-/* The next available element.  */
-#define COMPILE_STACK_TOP (compile_stack.stack[compile_stack.avail])
-
-
-/* Set the bit for character C in a list.  */
-#define SET_LIST_BIT(c)                               \
-  (b[((unsigned char) (c)) / BYTEWIDTH]               \
-   |= 1 << (((unsigned char) c) % BYTEWIDTH))
-
-
-/* Get the next unsigned number in the uncompiled pattern.  */
-#define GET_UNSIGNED_NUMBER(num) 					\
-  { if (p != pend)							\
-     {									\
-       PATFETCH (c); 							\
-       while (ISDIGIT (c)) 						\
-         { 								\
-           if (num < 0)							\
-              num = 0;							\
-           num = num * 10 + c - '0'; 					\
-           if (p == pend) 						\
-              break; 							\
-           PATFETCH (c);						\
-         } 								\
-       } 								\
-    }		
-
-#define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
-
-#define IS_CHAR_CLASS(string)						\
-   (STREQ (string, "alpha") || STREQ (string, "upper")			\
-    || STREQ (string, "lower") || STREQ (string, "digit")		\
-    || STREQ (string, "alnum") || STREQ (string, "xdigit")		\
-    || STREQ (string, "space") || STREQ (string, "print")		\
-    || STREQ (string, "punct") || STREQ (string, "graph")		\
-    || STREQ (string, "cntrl") || STREQ (string, "blank"))
-
-#ifndef MATCH_MAY_ALLOCATE
-
-/* If we cannot allocate large objects within re_match_2_internal,
-   we make the fail stack and register vectors global.
-   The fail stack, we grow to the maximum size when a regexp
-   is compiled.
-   The register vectors, we adjust in size each time we
-   compile a regexp, according to the number of registers it needs.  */
-
-static fail_stack_type fail_stack;
-
-/* Size with which the following vectors are currently allocated.
-   That is so we can make them bigger as needed,
-   but never make them smaller.  */
-static int regs_allocated_size;
-
-static const char **     regstart, **     regend;
-static const char ** old_regstart, ** old_regend;
-static const char **best_regstart, **best_regend;
-static register_info_type *reg_info; 
-static const char **reg_dummy;
-static register_info_type *reg_info_dummy;
-
-/* Make the register vectors big enough for NUM_REGS registers,
-   but don't make them smaller.  */
-
-static
-regex_grow_registers (num_regs)
-     int num_regs;
-{
-  if (num_regs > regs_allocated_size)
-    {
-      RETALLOC_IF (regstart,	 num_regs, const char *);
-      RETALLOC_IF (regend,	 num_regs, const char *);
-      RETALLOC_IF (old_regstart, num_regs, const char *);
-      RETALLOC_IF (old_regend,	 num_regs, const char *);
-      RETALLOC_IF (best_regstart, num_regs, const char *);
-      RETALLOC_IF (best_regend,	 num_regs, const char *);
-      RETALLOC_IF (reg_info,	 num_regs, register_info_type);
-      RETALLOC_IF (reg_dummy,	 num_regs, const char *);
-      RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
-
-      regs_allocated_size = num_regs;
-    }
-}
-
-#endif /* not MATCH_MAY_ALLOCATE */
-
-/* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
-   Returns one of error codes defined in `regex.h', or zero for success.
-
-   Assumes the `allocated' (and perhaps `buffer') and `translate'
-   fields are set in BUFP on entry.
-
-   If it succeeds, results are put in BUFP (if it returns an error, the
-   contents of BUFP are undefined):
-     `buffer' is the compiled pattern;
-     `syntax' is set to SYNTAX;
-     `used' is set to the length of the compiled pattern;
-     `fastmap_accurate' is zero;
-     `re_nsub' is the number of subexpressions in PATTERN;
-     `not_bol' and `not_eol' are zero;
-   
-   The `fastmap' and `newline_anchor' fields are neither
-   examined nor set.  */
-
-/* Return, freeing storage we allocated.  */
-#define FREE_STACK_RETURN(value)		\
-  return (free (compile_stack.stack), value)
-
-static reg_errcode_t
-regex_compile (pattern, size, syntax, bufp)
-     const char *pattern;
-     int size;
-     reg_syntax_t syntax;
-     struct re_pattern_buffer *bufp;
-{
-  /* We fetch characters from PATTERN here.  Even though PATTERN is
-     `char *' (i.e., signed), we declare these variables as unsigned, so
-     they can be reliably used as array indices.  */
-  register unsigned char c, c1;
-  
-  /* A random temporary spot in PATTERN.  */
-  const char *p1;
-
-  /* Points to the end of the buffer, where we should append.  */
-  register unsigned char *b;
-  
-  /* Keeps track of unclosed groups.  */
-  compile_stack_type compile_stack;
-
-  /* Points to the current (ending) position in the pattern.  */
-  const char *p = pattern;
-  const char *pend = pattern + size;
-  
-  /* How to translate the characters in the pattern.  */
-  char *translate = bufp->translate;
-
-  /* Address of the count-byte of the most recently inserted `exactn'
-     command.  This makes it possible to tell if a new exact-match
-     character can be added to that command or if the character requires
-     a new `exactn' command.  */
-  unsigned char *pending_exact = 0;
-
-  /* Address of start of the most recently finished expression.
-     This tells, e.g., postfix * where to find the start of its
-     operand.  Reset at the beginning of groups and alternatives.  */
-  unsigned char *laststart = 0;
-
-  /* Address of beginning of regexp, or inside of last group.  */
-  unsigned char *begalt;
-
-  /* Place in the uncompiled pattern (i.e., the {) to
-     which to go back if the interval is invalid.  */
-  const char *beg_interval;
-                
-  /* Address of the place where a forward jump should go to the end of
-     the containing expression.  Each alternative of an `or' -- except the
-     last -- ends with a forward jump of this sort.  */
-  unsigned char *fixup_alt_jump = 0;
-
-  /* Counts open-groups as they are encountered.  Remembered for the
-     matching close-group on the compile stack, so the same register
-     number is put in the stop_memory as the start_memory.  */
-  regnum_t regnum = 0;
-
-#ifdef DEBUG
-  DEBUG_PRINT1 ("\nCompiling pattern: ");
-  if (debug)
-    {
-      unsigned debug_count;
-      
-      for (debug_count = 0; debug_count < size; debug_count++)
-        putchar (pattern[debug_count]);
-      putchar ('\n');
-    }
-#endif /* DEBUG */
-
-  /* Initialize the compile stack.  */
-  compile_stack.stack = TALLOC (INIT_COMPILE_STACK_SIZE, compile_stack_elt_t);
-  if (compile_stack.stack == NULL)
-    return REG_ESPACE;
-
-  compile_stack.size = INIT_COMPILE_STACK_SIZE;
-  compile_stack.avail = 0;
-
-  /* Initialize the pattern buffer.  */
-  bufp->syntax = syntax;
-  bufp->fastmap_accurate = 0;
-  bufp->not_bol = bufp->not_eol = 0;
-
-  /* Set `used' to zero, so that if we return an error, the pattern
-     printer (for debugging) will think there's no pattern.  We reset it
-     at the end.  */
-  bufp->used = 0;
-  
-  /* Always count groups, whether or not bufp->no_sub is set.  */
-  bufp->re_nsub = 0;				
-
-#if !defined (emacs) && !defined (SYNTAX_TABLE)
-  /* Initialize the syntax table.  */
-   init_syntax_once ();
-#endif
-
-  if (bufp->allocated == 0)
-    {
-      if (bufp->buffer)
-	{ /* If zero allocated, but buffer is non-null, try to realloc
-             enough space.  This loses if buffer's address is bogus, but
-             that is the user's responsibility.  */
-          RETALLOC (bufp->buffer, INIT_BUF_SIZE, unsigned char);
-        }
-      else
-        { /* Caller did not allocate a buffer.  Do it for them.  */
-          bufp->buffer = TALLOC (INIT_BUF_SIZE, unsigned char);
-        }
-      if (!bufp->buffer) FREE_STACK_RETURN (REG_ESPACE);
-
-      bufp->allocated = INIT_BUF_SIZE;
-    }
-
-  begalt = b = bufp->buffer;
-
-  /* Loop through the uncompiled pattern until we're at the end.  */
-  while (p != pend)
-    {
-      PATFETCH (c);
-
-      switch (c)
-        {
-        case '^':
-          {
-            if (   /* If at start of pattern, it's an operator.  */
-                   p == pattern + 1
-                   /* If context independent, it's an operator.  */
-                || syntax & RE_CONTEXT_INDEP_ANCHORS
-                   /* Otherwise, depends on what's come before.  */
-                || at_begline_loc_p (pattern, p, syntax))
-              BUF_PUSH (begline);
-            else
-              goto normal_char;
-          }
-          break;
-
-
-        case '$':
-          {
-            if (   /* If at end of pattern, it's an operator.  */
-                   p == pend 
-                   /* If context independent, it's an operator.  */
-                || syntax & RE_CONTEXT_INDEP_ANCHORS
-                   /* Otherwise, depends on what's next.  */
-                || at_endline_loc_p (p, pend, syntax))
-               BUF_PUSH (endline);
-             else
-               goto normal_char;
-           }
-           break;
-
-
-	case '+':
-        case '?':
-          if ((syntax & RE_BK_PLUS_QM)
-              || (syntax & RE_LIMITED_OPS))
-            goto normal_char;
-        handle_plus:
-        case '*':
-          /* If there is no previous pattern... */
-          if (!laststart)
-            {
-              if (syntax & RE_CONTEXT_INVALID_OPS)
-                FREE_STACK_RETURN (REG_BADRPT);
-              else if (!(syntax & RE_CONTEXT_INDEP_OPS))
-                goto normal_char;
-            }
-
-          {
-            /* Are we optimizing this jump?  */
-            boolean keep_string_p = false;
-            
-            /* 1 means zero (many) matches is allowed.  */
-            char zero_times_ok = 0, many_times_ok = 0;
-
-            /* If there is a sequence of repetition chars, collapse it
-               down to just one (the right one).  We can't combine
-               interval operators with these because of, e.g., `a{2}*',
-               which should only match an even number of `a's.  */
-
-            for (;;)
-              {
-                zero_times_ok |= c != '+';
-                many_times_ok |= c != '?';
-
-                if (p == pend)
-                  break;
-
-                PATFETCH (c);
-
-                if (c == '*'
-                    || (!(syntax & RE_BK_PLUS_QM) && (c == '+' || c == '?')))
-                  ;
-
-                else if (syntax & RE_BK_PLUS_QM  &&  c == '\\')
-                  {
-                    if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
-
-                    PATFETCH (c1);
-                    if (!(c1 == '+' || c1 == '?'))
-                      {
-                        PATUNFETCH;
-                        PATUNFETCH;
-                        break;
-                      }
-
-                    c = c1;
-                  }
-                else
-                  {
-                    PATUNFETCH;
-                    break;
-                  }
-
-                /* If we get here, we found another repeat character.  */
-               }
-
-            /* Star, etc. applied to an empty pattern is equivalent
-               to an empty pattern.  */
-            if (!laststart)  
-              break;
-
-            /* Now we know whether or not zero matches is allowed
-               and also whether or not two or more matches is allowed.  */
-            if (many_times_ok)
-              { /* More than one repetition is allowed, so put in at the
-                   end a backward relative jump from `b' to before the next
-                   jump we're going to put in below (which jumps from
-                   laststart to after this jump).  
-
-                   But if we are at the `*' in the exact sequence `.*\n',
-                   insert an unconditional jump backwards to the .,
-                   instead of the beginning of the loop.  This way we only
-                   push a failure point once, instead of every time
-                   through the loop.  */
-                assert (p - 1 > pattern);
-
-                /* Allocate the space for the jump.  */
-                GET_BUFFER_SPACE (3);
-
-                /* We know we are not at the first character of the pattern,
-                   because laststart was nonzero.  And we've already
-                   incremented `p', by the way, to be the character after
-                   the `*'.  Do we have to do something analogous here
-                   for null bytes, because of RE_DOT_NOT_NULL?  */
-                if (TRANSLATE (*(p - 2)) == TRANSLATE ('.')
-		    && zero_times_ok
-                    && p < pend && TRANSLATE (*p) == TRANSLATE ('\n')
-                    && !(syntax & RE_DOT_NEWLINE))
-                  { /* We have .*\n.  */
-                    STORE_JUMP (jump, b, laststart);
-                    keep_string_p = true;
-                  }
-                else
-                  /* Anything else.  */
-                  STORE_JUMP (maybe_pop_jump, b, laststart - 3);
-
-                /* We've added more stuff to the buffer.  */
-                b += 3;
-              }
-
-            /* On failure, jump from laststart to b + 3, which will be the
-               end of the buffer after this jump is inserted.  */
-            GET_BUFFER_SPACE (3);
-            INSERT_JUMP (keep_string_p ? on_failure_keep_string_jump
-                                       : on_failure_jump,
-                         laststart, b + 3);
-            pending_exact = 0;
-            b += 3;
-
-            if (!zero_times_ok)
-              {
-                /* At least one repetition is required, so insert a
-                   `dummy_failure_jump' before the initial
-                   `on_failure_jump' instruction of the loop. This
-                   effects a skip over that instruction the first time
-                   we hit that loop.  */
-                GET_BUFFER_SPACE (3);
-                INSERT_JUMP (dummy_failure_jump, laststart, laststart + 6);
-                b += 3;
-              }
-            }
-	  break;
-
-
-	case '.':
-          laststart = b;
-          BUF_PUSH (anychar);
-          break;
-
-
-        case '[':
-          {
-            boolean had_char_class = false;
-
-            if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-            /* Ensure that we have enough space to push a charset: the
-               opcode, the length count, and the bitset; 34 bytes in all.  */
-	    GET_BUFFER_SPACE (34);
-
-            laststart = b;
-
-            /* We test `*p == '^' twice, instead of using an if
-               statement, so we only need one BUF_PUSH.  */
-            BUF_PUSH (*p == '^' ? charset_not : charset); 
-            if (*p == '^')
-              p++;
-
-            /* Remember the first position in the bracket expression.  */
-            p1 = p;
-
-            /* Push the number of bytes in the bitmap.  */
-            BUF_PUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
-
-            /* Clear the whole map.  */
-            bzero (b, (1 << BYTEWIDTH) / BYTEWIDTH);
-
-            /* charset_not matches newline according to a syntax bit.  */
-            if ((re_opcode_t) b[-2] == charset_not
-                && (syntax & RE_HAT_LISTS_NOT_NEWLINE))
-              SET_LIST_BIT ('\n');
-
-            /* Read in characters and ranges, setting map bits.  */
-            for (;;)
-              {
-                if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-                PATFETCH (c);
-
-                /* \ might escape characters inside [...] and [^...].  */
-                if ((syntax & RE_BACKSLASH_ESCAPE_IN_LISTS) && c == '\\')
-                  {
-                    if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
-
-                    PATFETCH (c1);
-                    SET_LIST_BIT (c1);
-                    continue;
-                  }
-
-                /* Could be the end of the bracket expression.  If it's
-                   not (i.e., when the bracket expression is `[]' so
-                   far), the ']' character bit gets set way below.  */
-                if (c == ']' && p != p1 + 1)
-                  break;
-
-                /* Look ahead to see if it's a range when the last thing
-                   was a character class.  */
-                if (had_char_class && c == '-' && *p != ']')
-                  FREE_STACK_RETURN (REG_ERANGE);
-
-                /* Look ahead to see if it's a range when the last thing
-                   was a character: if this is a hyphen not at the
-                   beginning or the end of a list, then it's the range
-                   operator.  */
-                if (c == '-' 
-                    && !(p - 2 >= pattern && p[-2] == '[') 
-                    && !(p - 3 >= pattern && p[-3] == '[' && p[-2] == '^')
-                    && *p != ']')
-                  {
-                    reg_errcode_t ret
-                      = compile_range (&p, pend, translate, syntax, b);
-                    if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
-                  }
-
-                else if (p[0] == '-' && p[1] != ']')
-                  { /* This handles ranges made up of characters only.  */
-                    reg_errcode_t ret;
-
-		    /* Move past the `-'.  */
-                    PATFETCH (c1);
-                    
-                    ret = compile_range (&p, pend, translate, syntax, b);
-                    if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
-                  }
-
-                /* See if we're at the beginning of a possible character
-                   class.  */
-
-                else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
-                  { /* Leave room for the null.  */
-                    char str[CHAR_CLASS_MAX_LENGTH + 1];
-
-                    PATFETCH (c);
-                    c1 = 0;
-
-                    /* If pattern is `[[:'.  */
-                    if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-                    for (;;)
-                      {
-                        PATFETCH (c);
-                        if (c == ':' || c == ']' || p == pend
-                            || c1 == CHAR_CLASS_MAX_LENGTH)
-                          break;
-                        str[c1++] = c;
-                      }
-                    str[c1] = '\0';
-
-                    /* If isn't a word bracketed by `[:' and:`]':
-                       undo the ending character, the letters, and leave 
-                       the leading `:' and `[' (but set bits for them).  */
-                    if (c == ':' && *p == ']')
-                      {
-                        int ch;
-                        boolean is_alnum = STREQ (str, "alnum");
-                        boolean is_alpha = STREQ (str, "alpha");
-                        boolean is_blank = STREQ (str, "blank");
-                        boolean is_cntrl = STREQ (str, "cntrl");
-                        boolean is_digit = STREQ (str, "digit");
-                        boolean is_graph = STREQ (str, "graph");
-                        boolean is_lower = STREQ (str, "lower");
-                        boolean is_print = STREQ (str, "print");
-                        boolean is_punct = STREQ (str, "punct");
-                        boolean is_space = STREQ (str, "space");
-                        boolean is_upper = STREQ (str, "upper");
-                        boolean is_xdigit = STREQ (str, "xdigit");
-                        
-                        if (!IS_CHAR_CLASS (str))
-			  FREE_STACK_RETURN (REG_ECTYPE);
-
-                        /* Throw away the ] at the end of the character
-                           class.  */
-                        PATFETCH (c);					
-
-                        if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
-
-                        for (ch = 0; ch < 1 << BYTEWIDTH; ch++)
-                          {
-			    /* This was split into 3 if's to
-			       avoid an arbitrary limit in some compiler.  */
-                            if (   (is_alnum  && ISALNUM (ch))
-                                || (is_alpha  && ISALPHA (ch))
-                                || (is_blank  && ISBLANK (ch))
-                                || (is_cntrl  && ISCNTRL (ch)))
-			      SET_LIST_BIT (ch);
-			    if (   (is_digit  && ISDIGIT (ch))
-                                || (is_graph  && ISGRAPH (ch))
-                                || (is_lower  && ISLOWER (ch))
-                                || (is_print  && ISPRINT (ch)))
-			      SET_LIST_BIT (ch);
-			    if (   (is_punct  && ISPUNCT (ch))
-                                || (is_space  && ISSPACE (ch))
-                                || (is_upper  && ISUPPER (ch))
-                                || (is_xdigit && ISXDIGIT (ch)))
-			      SET_LIST_BIT (ch);
-                          }
-                        had_char_class = true;
-                      }
-                    else
-                      {
-                        c1++;
-                        while (c1--)    
-                          PATUNFETCH;
-                        SET_LIST_BIT ('[');
-                        SET_LIST_BIT (':');
-                        had_char_class = false;
-                      }
-                  }
-                else
-                  {
-                    had_char_class = false;
-                    SET_LIST_BIT (c);
-                  }
-              }
-
-            /* Discard any (non)matching list bytes that are all 0 at the
-               end of the map.  Decrease the map-length byte too.  */
-            while ((int) b[-1] > 0 && b[b[-1] - 1] == 0) 
-              b[-1]--; 
-            b += b[-1];
-          }
-          break;
-
-
-	case '(':
-          if (syntax & RE_NO_BK_PARENS)
-            goto handle_open;
-          else
-            goto normal_char;
-
-
-        case ')':
-          if (syntax & RE_NO_BK_PARENS)
-            goto handle_close;
-          else
-            goto normal_char;
-
-
-        case '\n':
-          if (syntax & RE_NEWLINE_ALT)
-            goto handle_alt;
-          else
-            goto normal_char;
-
-
-	case '|':
-          if (syntax & RE_NO_BK_VBAR)
-            goto handle_alt;
-          else
-            goto normal_char;
-
-
-        case '{':
-           if (syntax & RE_INTERVALS && syntax & RE_NO_BK_BRACES)
-             goto handle_interval;
-           else
-             goto normal_char;
-
-
-        case '\\':
-          if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
-
-          /* Do not translate the character after the \, so that we can
-             distinguish, e.g., \B from \b, even if we normally would
-             translate, e.g., B to b.  */
-          PATFETCH_RAW (c);
-
-          switch (c)
-            {
-            case '(':
-              if (syntax & RE_NO_BK_PARENS)
-                goto normal_backslash;
-
-            handle_open:
-              bufp->re_nsub++;
-              regnum++;
-
-              if (COMPILE_STACK_FULL)
-                { 
-                  RETALLOC (compile_stack.stack, compile_stack.size << 1,
-                            compile_stack_elt_t);
-                  if (compile_stack.stack == NULL) return REG_ESPACE;
-
-                  compile_stack.size <<= 1;
-                }
-
-              /* These are the values to restore when we hit end of this
-                 group.  They are all relative offsets, so that if the
-                 whole pattern moves because of realloc, they will still
-                 be valid.  */
-              COMPILE_STACK_TOP.begalt_offset = begalt - bufp->buffer;
-              COMPILE_STACK_TOP.fixup_alt_jump 
-                = fixup_alt_jump ? fixup_alt_jump - bufp->buffer + 1 : 0;
-              COMPILE_STACK_TOP.laststart_offset = b - bufp->buffer;
-              COMPILE_STACK_TOP.regnum = regnum;
-
-              /* We will eventually replace the 0 with the number of
-                 groups inner to this one.  But do not push a
-                 start_memory for groups beyond the last one we can
-                 represent in the compiled pattern.  */
-              if (regnum <= MAX_REGNUM)
-                {
-                  COMPILE_STACK_TOP.inner_group_offset = b - bufp->buffer + 2;
-                  BUF_PUSH_3 (start_memory, regnum, 0);
-                }
-                
-              compile_stack.avail++;
-
-              fixup_alt_jump = 0;
-              laststart = 0;
-              begalt = b;
-	      /* If we've reached MAX_REGNUM groups, then this open
-		 won't actually generate any code, so we'll have to
-		 clear pending_exact explicitly.  */
-	      pending_exact = 0;
-              break;
-
-
-            case ')':
-              if (syntax & RE_NO_BK_PARENS) goto normal_backslash;
-
-              if (COMPILE_STACK_EMPTY)
-                if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
-                  goto normal_backslash;
-                else
-                  FREE_STACK_RETURN (REG_ERPAREN);
-
-            handle_close:
-              if (fixup_alt_jump)
-                { /* Push a dummy failure point at the end of the
-                     alternative for a possible future
-                     `pop_failure_jump' to pop.  See comments at
-                     `push_dummy_failure' in `re_match_2'.  */
-                  BUF_PUSH (push_dummy_failure);
-                  
-                  /* We allocated space for this jump when we assigned
-                     to `fixup_alt_jump', in the `handle_alt' case below.  */
-                  STORE_JUMP (jump_past_alt, fixup_alt_jump, b - 1);
-                }
-
-              /* See similar code for backslashed left paren above.  */
-              if (COMPILE_STACK_EMPTY)
-                if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
-                  goto normal_char;
-                else
-                  FREE_STACK_RETURN (REG_ERPAREN);
-
-              /* Since we just checked for an empty stack above, this
-                 ``can't happen''.  */
-              assert (compile_stack.avail != 0);
-              {
-                /* We don't just want to restore into `regnum', because
-                   later groups should continue to be numbered higher,
-                   as in `(ab)c(de)' -- the second group is #2.  */
-                regnum_t this_group_regnum;
-
-                compile_stack.avail--;		
-                begalt = bufp->buffer + COMPILE_STACK_TOP.begalt_offset;
-                fixup_alt_jump
-                  = COMPILE_STACK_TOP.fixup_alt_jump
-                    ? bufp->buffer + COMPILE_STACK_TOP.fixup_alt_jump - 1 
-                    : 0;
-                laststart = bufp->buffer + COMPILE_STACK_TOP.laststart_offset;
-                this_group_regnum = COMPILE_STACK_TOP.regnum;
-		/* If we've reached MAX_REGNUM groups, then this open
-		   won't actually generate any code, so we'll have to
-		   clear pending_exact explicitly.  */
-		pending_exact = 0;
-
-                /* We're at the end of the group, so now we know how many
-                   groups were inside this one.  */
-                if (this_group_regnum <= MAX_REGNUM)
-                  {
-                    unsigned char *inner_group_loc
-                      = bufp->buffer + COMPILE_STACK_TOP.inner_group_offset;
-                    
-                    *inner_group_loc = regnum - this_group_regnum;
-                    BUF_PUSH_3 (stop_memory, this_group_regnum,
-                                regnum - this_group_regnum);
-                  }
-              }
-              break;
-
-
-            case '|':					/* `\|'.  */
-              if (syntax & RE_LIMITED_OPS || syntax & RE_NO_BK_VBAR)
-                goto normal_backslash;
-            handle_alt:
-              if (syntax & RE_LIMITED_OPS)
-                goto normal_char;
-
-              /* Insert before the previous alternative a jump which
-                 jumps to this alternative if the former fails.  */
-              GET_BUFFER_SPACE (3);
-              INSERT_JUMP (on_failure_jump, begalt, b + 6);
-              pending_exact = 0;
-              b += 3;
-
-              /* The alternative before this one has a jump after it
-                 which gets executed if it gets matched.  Adjust that
-                 jump so it will jump to this alternative's analogous
-                 jump (put in below, which in turn will jump to the next
-                 (if any) alternative's such jump, etc.).  The last such
-                 jump jumps to the correct final destination.  A picture:
-                          _____ _____ 
-                          |   | |   |   
-                          |   v |   v 
-                         a | b   | c   
-
-                 If we are at `b', then fixup_alt_jump right now points to a
-                 three-byte space after `a'.  We'll put in the jump, set
-                 fixup_alt_jump to right after `b', and leave behind three
-                 bytes which we'll fill in when we get to after `c'.  */
-
-              if (fixup_alt_jump)
-                STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
-
-              /* Mark and leave space for a jump after this alternative,
-                 to be filled in later either by next alternative or
-                 when know we're at the end of a series of alternatives.  */
-              fixup_alt_jump = b;
-              GET_BUFFER_SPACE (3);
-              b += 3;
-
-              laststart = 0;
-              begalt = b;
-              break;
-
-
-            case '{': 
-              /* If \{ is a literal.  */
-              if (!(syntax & RE_INTERVALS)
-                     /* If we're at `\{' and it's not the open-interval 
-                        operator.  */
-                  || ((syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
-                  || (p - 2 == pattern  &&  p == pend))
-                goto normal_backslash;
-
-            handle_interval:
-              {
-                /* If got here, then the syntax allows intervals.  */
-
-                /* At least (most) this many matches must be made.  */
-                int lower_bound = -1, upper_bound = -1;
-
-                beg_interval = p - 1;
-
-                if (p == pend)
-                  {
-                    if (syntax & RE_NO_BK_BRACES)
-                      goto unfetch_interval;
-                    else
-                      FREE_STACK_RETURN (REG_EBRACE);
-                  }
-
-                GET_UNSIGNED_NUMBER (lower_bound);
-
-                if (c == ',')
-                  {
-                    GET_UNSIGNED_NUMBER (upper_bound);
-                    if (upper_bound < 0) upper_bound = RE_DUP_MAX;
-                  }
-                else
-                  /* Interval such as `{1}' => match exactly once. */
-                  upper_bound = lower_bound;
-
-                if (lower_bound < 0 || upper_bound > RE_DUP_MAX
-                    || lower_bound > upper_bound)
-                  {
-                    if (syntax & RE_NO_BK_BRACES)
-                      goto unfetch_interval;
-                    else 
-                      FREE_STACK_RETURN (REG_BADBR);
-                  }
-
-                if (!(syntax & RE_NO_BK_BRACES)) 
-                  {
-                    if (c != '\\') FREE_STACK_RETURN (REG_EBRACE);
-
-                    PATFETCH (c);
-                  }
-
-                if (c != '}')
-                  {
-                    if (syntax & RE_NO_BK_BRACES)
-                      goto unfetch_interval;
-                    else 
-                      FREE_STACK_RETURN (REG_BADBR);
-                  }
-
-                /* We just parsed a valid interval.  */
-
-                /* If it's invalid to have no preceding re.  */
-                if (!laststart)
-                  {
-                    if (syntax & RE_CONTEXT_INVALID_OPS)
-                      FREE_STACK_RETURN (REG_BADRPT);
-                    else if (syntax & RE_CONTEXT_INDEP_OPS)
-                      laststart = b;
-                    else
-                      goto unfetch_interval;
-                  }
-
-                /* If the upper bound is zero, don't want to succeed at
-                   all; jump from `laststart' to `b + 3', which will be
-                   the end of the buffer after we insert the jump.  */
-                 if (upper_bound == 0)
-                   {
-                     GET_BUFFER_SPACE (3);
-                     INSERT_JUMP (jump, laststart, b + 3);
-                     b += 3;
-                   }
-
-                 /* Otherwise, we have a nontrivial interval.  When
-                    we're all done, the pattern will look like:
-                      set_number_at <jump count> <upper bound>
-                      set_number_at <succeed_n count> <lower bound>
-                      succeed_n <after jump addr> <succeed_n count>
-                      <body of loop>
-                      jump_n <succeed_n addr> <jump count>
-                    (The upper bound and `jump_n' are omitted if
-                    `upper_bound' is 1, though.)  */
-                 else 
-                   { /* If the upper bound is > 1, we need to insert
-                        more at the end of the loop.  */
-                     unsigned nbytes = 10 + (upper_bound > 1) * 10;
-
-                     GET_BUFFER_SPACE (nbytes);
-
-                     /* Initialize lower bound of the `succeed_n', even
-                        though it will be set during matching by its
-                        attendant `set_number_at' (inserted next),
-                        because `re_compile_fastmap' needs to know.
-                        Jump to the `jump_n' we might insert below.  */
-                     INSERT_JUMP2 (succeed_n, laststart,
-                                   b + 5 + (upper_bound > 1) * 5,
-                                   lower_bound);
-                     b += 5;
-
-                     /* Code to initialize the lower bound.  Insert 
-                        before the `succeed_n'.  The `5' is the last two
-                        bytes of this `set_number_at', plus 3 bytes of
-                        the following `succeed_n'.  */
-                     insert_op2 (set_number_at, laststart, 5, lower_bound, b);
-                     b += 5;
-
-                     if (upper_bound > 1)
-                       { /* More than one repetition is allowed, so
-                            append a backward jump to the `succeed_n'
-                            that starts this interval.
-                            
-                            When we've reached this during matching,
-                            we'll have matched the interval once, so
-                            jump back only `upper_bound - 1' times.  */
-                         STORE_JUMP2 (jump_n, b, laststart + 5,
-                                      upper_bound - 1);
-                         b += 5;
-
-                         /* The location we want to set is the second
-                            parameter of the `jump_n'; that is `b-2' as
-                            an absolute address.  `laststart' will be
-                            the `set_number_at' we're about to insert;
-                            `laststart+3' the number to set, the source
-                            for the relative address.  But we are
-                            inserting into the middle of the pattern --
-                            so everything is getting moved up by 5.
-                            Conclusion: (b - 2) - (laststart + 3) + 5,
-                            i.e., b - laststart.
-                            
-                            We insert this at the beginning of the loop
-                            so that if we fail during matching, we'll
-                            reinitialize the bounds.  */
-                         insert_op2 (set_number_at, laststart, b - laststart,
-                                     upper_bound - 1, b);
-                         b += 5;
-                       }
-                   }
-                pending_exact = 0;
-                beg_interval = NULL;
-              }
-              break;
-
-            unfetch_interval:
-              /* If an invalid interval, match the characters as literals.  */
-               assert (beg_interval);
-               p = beg_interval;
-               beg_interval = NULL;
-
-               /* normal_char and normal_backslash need `c'.  */
-               PATFETCH (c);	
-
-               if (!(syntax & RE_NO_BK_BRACES))
-                 {
-                   if (p > pattern  &&  p[-1] == '\\')
-                     goto normal_backslash;
-                 }
-               goto normal_char;
-
-#ifdef emacs
-            /* There is no way to specify the before_dot and after_dot
-               operators.  rms says this is ok.  --karl  */
-            case '=':
-              BUF_PUSH (at_dot);
-              break;
-
-            case 's':	
-              laststart = b;
-              PATFETCH (c);
-              BUF_PUSH_2 (syntaxspec, syntax_spec_code[c]);
-              break;
-
-            case 'S':
-              laststart = b;
-              PATFETCH (c);
-              BUF_PUSH_2 (notsyntaxspec, syntax_spec_code[c]);
-              break;
-#endif /* emacs */
-
-
-            case 'w':
-              laststart = b;
-              BUF_PUSH (wordchar);
-              break;
-
-
-            case 'W':
-              laststart = b;
-              BUF_PUSH (notwordchar);
-              break;
-
-
-            case '<':
-              BUF_PUSH (wordbeg);
-              break;
-
-            case '>':
-              BUF_PUSH (wordend);
-              break;
-
-            case 'b':
-              BUF_PUSH (wordbound);
-              break;
-
-            case 'B':
-              BUF_PUSH (notwordbound);
-              break;
-
-            case '`':
-              BUF_PUSH (begbuf);
-              break;
-
-            case '\'':
-              BUF_PUSH (endbuf);
-              break;
-
-            case '1': case '2': case '3': case '4': case '5':
-            case '6': case '7': case '8': case '9':
-              if (syntax & RE_NO_BK_REFS)
-                goto normal_char;
-
-              c1 = c - '0';
-
-              if (c1 > regnum)
-                FREE_STACK_RETURN (REG_ESUBREG);
-
-              /* Can't back reference to a subexpression if inside of it.  */
-              if (group_in_compile_stack (compile_stack, c1))
-                goto normal_char;
-
-              laststart = b;
-              BUF_PUSH_2 (duplicate, c1);
-              break;
-
-
-            case '+':
-            case '?':
-              if (syntax & RE_BK_PLUS_QM)
-                goto handle_plus;
-              else
-                goto normal_backslash;
-
-            default:
-            normal_backslash:
-              /* You might think it would be useful for \ to mean
-                 not to translate; but if we don't translate it
-                 it will never match anything.  */
-              c = TRANSLATE (c);
-              goto normal_char;
-            }
-          break;
-
-
-	default:
-        /* Expects the character in `c'.  */
-	normal_char:
-	      /* If no exactn currently being built.  */
-          if (!pending_exact 
-
-              /* If last exactn not at current position.  */
-              || pending_exact + *pending_exact + 1 != b
-              
-              /* We have only one byte following the exactn for the count.  */
-	      || *pending_exact == (1 << BYTEWIDTH) - 1
-
-              /* If followed by a repetition operator.  */
-              || *p == '*' || *p == '^'
-	      || ((syntax & RE_BK_PLUS_QM)
-		  ? *p == '\\' && (p[1] == '+' || p[1] == '?')
-		  : (*p == '+' || *p == '?'))
-	      || ((syntax & RE_INTERVALS)
-                  && ((syntax & RE_NO_BK_BRACES)
-		      ? *p == '{'
-                      : (p[0] == '\\' && p[1] == '{'))))
-	    {
-	      /* Start building a new exactn.  */
-              
-              laststart = b;
-
-	      BUF_PUSH_2 (exactn, 0);
-	      pending_exact = b - 1;
-            }
-            
-	  BUF_PUSH (c);
-          (*pending_exact)++;
-	  break;
-        } /* switch (c) */
-    } /* while p != pend */
-
-  
-  /* Through the pattern now.  */
-  
-  if (fixup_alt_jump)
-    STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
-
-  if (!COMPILE_STACK_EMPTY) 
-    FREE_STACK_RETURN (REG_EPAREN);
-
-  /* If we don't want backtracking, force success
-     the first time we reach the end of the compiled pattern.  */
-  if (syntax & RE_NO_POSIX_BACKTRACKING)
-    BUF_PUSH (succeed);
-
-  free (compile_stack.stack);
-
-  /* We have succeeded; set the length of the buffer.  */
-  bufp->used = b - bufp->buffer;
-
-#ifdef DEBUG
-  if (debug)
-    {
-      DEBUG_PRINT1 ("\nCompiled pattern: \n");
-      print_compiled_pattern (bufp);
-    }
-#endif /* DEBUG */
-
-#ifndef MATCH_MAY_ALLOCATE
-  /* Initialize the failure stack to the largest possible stack.  This
-     isn't necessary unless we're trying to avoid calling alloca in
-     the search and match routines.  */
-  {
-    int num_regs = bufp->re_nsub + 1;
-
-    /* Since DOUBLE_FAIL_STACK refuses to double only if the current size
-       is strictly greater than re_max_failures, the largest possible stack
-       is 2 * re_max_failures failure points.  */
-    if (fail_stack.size < (2 * re_max_failures * MAX_FAILURE_ITEMS))
-      {
-	fail_stack.size = (2 * re_max_failures * MAX_FAILURE_ITEMS);
-
-#ifdef emacs
-	if (! fail_stack.stack)
-	  fail_stack.stack
-	    = (fail_stack_elt_t *) xmalloc (fail_stack.size 
-					    * sizeof (fail_stack_elt_t));
-	else
-	  fail_stack.stack
-	    = (fail_stack_elt_t *) xrealloc (fail_stack.stack,
-					     (fail_stack.size
-					      * sizeof (fail_stack_elt_t)));
-#else /* not emacs */
-	if (! fail_stack.stack)
-	  fail_stack.stack
-	    = (fail_stack_elt_t *) malloc (fail_stack.size 
-					   * sizeof (fail_stack_elt_t));
-	else
-	  fail_stack.stack
-	    = (fail_stack_elt_t *) realloc (fail_stack.stack,
-					    (fail_stack.size
-					     * sizeof (fail_stack_elt_t)));
-#endif /* not emacs */
-      }
-
-    regex_grow_registers (num_regs);
-  }
-#endif /* not MATCH_MAY_ALLOCATE */
-
-  return REG_NOERROR;
-} /* regex_compile */
-
-/* Subroutines for `regex_compile'.  */
-
-/* Store OP at LOC followed by two-byte integer parameter ARG.  */
-
-static void
-store_op1 (op, loc, arg)
-    re_opcode_t op;
-    unsigned char *loc;
-    int arg;
-{
-  *loc = (unsigned char) op;
-  STORE_NUMBER (loc + 1, arg);
-}
-
-
-/* Like `store_op1', but for two two-byte parameters ARG1 and ARG2.  */
-
-static void
-store_op2 (op, loc, arg1, arg2)
-    re_opcode_t op;
-    unsigned char *loc;
-    int arg1, arg2;
-{
-  *loc = (unsigned char) op;
-  STORE_NUMBER (loc + 1, arg1);
-  STORE_NUMBER (loc + 3, arg2);
-}
-
-
-/* Copy the bytes from LOC to END to open up three bytes of space at LOC
-   for OP followed by two-byte integer parameter ARG.  */
+   Copyright (C) 1993, 1994, 1995 Free Software Foundation, Inc.
 
-static void
-insert_op1 (op, loc, arg, end)
-    re_opcode_t op;
-    unsigned char *loc;
-    int arg;
-    unsigned char *end;    
-{
-  register unsigned char *pfrom = end;
-  register unsigned char *pto = end + 3;
-
-  while (pfrom != loc)
-    *--pto = *--pfrom;
-    
-  store_op1 (op, loc, arg);
-}
-
-
-/* Like `insert_op1', but for two two-byte parameters ARG1 and ARG2.  */
-
-static void
-insert_op2 (op, loc, arg1, arg2, end)
-    re_opcode_t op;
-    unsigned char *loc;
-    int arg1, arg2;
-    unsigned char *end;    
-{
-  register unsigned char *pfrom = end;
-  register unsigned char *pto = end + 5;
-
-  while (pfrom != loc)
-    *--pto = *--pfrom;
-    
-  store_op2 (op, loc, arg1, arg2);
-}
-
-
-/* P points to just after a ^ in PATTERN.  Return true if that ^ comes
-   after an alternative or a begin-subexpression.  We assume there is at
-   least one character before the ^.  */
-
-static boolean
-at_begline_loc_p (pattern, p, syntax)
-    const char *pattern, *p;
-    reg_syntax_t syntax;
-{
-  const char *prev = p - 2;
-  boolean prev_prev_backslash = prev > pattern && prev[-1] == '\\';
-  
-  return
-       /* After a subexpression?  */
-       (*prev == '(' && (syntax & RE_NO_BK_PARENS || prev_prev_backslash))
-       /* After an alternative?  */
-    || (*prev == '|' && (syntax & RE_NO_BK_VBAR || prev_prev_backslash));
-}
-
-
-/* The dual of at_begline_loc_p.  This one is for $.  We assume there is
-   at least one character after the $, i.e., `P < PEND'.  */
-
-static boolean
-at_endline_loc_p (p, pend, syntax)
-    const char *p, *pend;
-    int syntax;
-{
-  const char *next = p;
-  boolean next_backslash = *next == '\\';
-  const char *next_next = p + 1 < pend ? p + 1 : NULL;
-  
-  return
-       /* Before a subexpression?  */
-       (syntax & RE_NO_BK_PARENS ? *next == ')'
-        : next_backslash && next_next && *next_next == ')')
-       /* Before an alternative?  */
-    || (syntax & RE_NO_BK_VBAR ? *next == '|'
-        : next_backslash && next_next && *next_next == '|');
-}
-
-
-/* Returns true if REGNUM is in one of COMPILE_STACK's elements and 
-   false if it's not.  */
-
-static boolean
-group_in_compile_stack (compile_stack, regnum)
-    compile_stack_type compile_stack;
-    regnum_t regnum;
-{
-  int this_element;
-
-  for (this_element = compile_stack.avail - 1;  
-       this_element >= 0; 
-       this_element--)
-    if (compile_stack.stack[this_element].regnum == regnum)
-      return true;
-
-  return false;
-}
-
-
-/* Read the ending character of a range (in a bracket expression) from the
-   uncompiled pattern *P_PTR (which ends at PEND).  We assume the
-   starting character is in `P[-2]'.  (`P[-1]' is the character `-'.)
-   Then we set the translation of all bits between the starting and
-   ending characters (inclusive) in the compiled pattern B.
-   
-   Return an error code.
-   
-   We use these short variable names so we can use the same macros as
-   `regex_compile' itself.  */
-
-static reg_errcode_t
-compile_range (p_ptr, pend, translate, syntax, b)
-    const char **p_ptr, *pend;
-    char *translate;
-    reg_syntax_t syntax;
-    unsigned char *b;
-{
-  unsigned this_char;
-
-  const char *p = *p_ptr;
-  int range_start, range_end;
-  
-  if (p == pend)
-    return REG_ERANGE;
-
-  /* Even though the pattern is a signed `char *', we need to fetch
-     with unsigned char *'s; if the high bit of the pattern character
-     is set, the range endpoints will be negative if we fetch using a
-     signed char *.
-
-     We also want to fetch the endpoints without translating them; the 
-     appropriate translation is done in the bit-setting loop below.  */
-  /* The SVR4 compiler on the 3B2 had trouble with unsigned const char *.  */
-  range_start = ((const unsigned char *) p)[-2];
-  range_end   = ((const unsigned char *) p)[0];
-
-  /* Have to increment the pointer into the pattern string, so the
-     caller isn't still at the ending character.  */
-  (*p_ptr)++;
-
-  /* If the start is after the end, the range is empty.  */
-  if (range_start > range_end)
-    return syntax & RE_NO_EMPTY_RANGES ? REG_ERANGE : REG_NOERROR;
-
-  /* Here we see why `this_char' has to be larger than an `unsigned
-     char' -- the range is inclusive, so if `range_end' == 0xff
-     (assuming 8-bit characters), we would otherwise go into an infinite
-     loop, since all characters <= 0xff.  */
-  for (this_char = range_start; this_char <= range_end; this_char++)
-    {
-      SET_LIST_BIT (TRANSLATE (this_char));
-    }
-  
-  return REG_NOERROR;
-}
-
-/* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in
-   BUFP.  A fastmap records which of the (1 << BYTEWIDTH) possible
-   characters can start a string that matches the pattern.  This fastmap
-   is used by re_search to skip quickly over impossible starting points.
-
-   The caller must supply the address of a (1 << BYTEWIDTH)-byte data
-   area as BUFP->fastmap.
-   
-   We set the `fastmap', `fastmap_accurate', and `can_be_null' fields in
-   the pattern buffer.
-
-   Returns 0 if we succeed, -2 if an internal error.   */
-
-int
-re_compile_fastmap (bufp)
-     struct re_pattern_buffer *bufp;
-{
-  int j, k;
-#ifdef MATCH_MAY_ALLOCATE
-  fail_stack_type fail_stack;
-#endif
-#ifndef REGEX_MALLOC
-  char *destination;
-#endif
-  /* We don't push any register information onto the failure stack.  */
-  unsigned num_regs = 0;
-  
-  register char *fastmap = bufp->fastmap;
-  unsigned char *pattern = bufp->buffer;
-  unsigned long size = bufp->used;
-  unsigned char *p = pattern;
-  register unsigned char *pend = pattern + size;
-
-  /* This holds the pointer to the failure stack, when
-     it is allocated relocatably.  */
-  fail_stack_elt_t *failure_stack_ptr;
-
-  /* Assume that each path through the pattern can be null until
-     proven otherwise.  We set this false at the bottom of switch
-     statement, to which we get only if a particular path doesn't
-     match the empty string.  */
-  boolean path_can_be_null = true;
-
-  /* We aren't doing a `succeed_n' to begin with.  */
-  boolean succeed_n_p = false;
-
-  assert (fastmap != NULL && p != NULL);
-  
-  INIT_FAIL_STACK ();
-  bzero (fastmap, 1 << BYTEWIDTH);  /* Assume nothing's valid.  */
-  bufp->fastmap_accurate = 1;	    /* It will be when we're done.  */
-  bufp->can_be_null = 0;
-      
-  while (1)
-    {
-      if (p == pend || *p == succeed)
-	{
-	  /* We have reached the (effective) end of pattern.  */
-	  if (!FAIL_STACK_EMPTY ())
-	    {
-	      bufp->can_be_null |= path_can_be_null;
-
-	      /* Reset for next path.  */
-	      path_can_be_null = true;
-
-	      p = fail_stack.stack[--fail_stack.avail].pointer;
-
-	      continue;
-	    }
-	  else
-	    break;
-	}
-
-      /* We should never be about to go beyond the end of the pattern.  */
-      assert (p < pend);
-      
-      switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
-	{
-
-        /* I guess the idea here is to simply not bother with a fastmap
-           if a backreference is used, since it's too hard to figure out
-           the fastmap for the corresponding group.  Setting
-           `can_be_null' stops `re_search_2' from using the fastmap, so
-           that is all we do.  */
-	case duplicate:
-	  bufp->can_be_null = 1;
-          goto done;
-
-
-      /* Following are the cases which match a character.  These end
-         with `break'.  */
-
-	case exactn:
-          fastmap[p[1]] = 1;
-	  break;
-
-
-        case charset:
-          for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
-	    if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
-              fastmap[j] = 1;
-	  break;
-
-
-	case charset_not:
-	  /* Chars beyond end of map must be allowed.  */
-	  for (j = *p * BYTEWIDTH; j < (1 << BYTEWIDTH); j++)
-            fastmap[j] = 1;
-
-	  for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
-	    if (!(p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH))))
-              fastmap[j] = 1;
-          break;
-
-
-	case wordchar:
-	  for (j = 0; j < (1 << BYTEWIDTH); j++)
-	    if (SYNTAX (j) == Sword)
-	      fastmap[j] = 1;
-	  break;
-
-
-	case notwordchar:
-	  for (j = 0; j < (1 << BYTEWIDTH); j++)
-	    if (SYNTAX (j) != Sword)
-	      fastmap[j] = 1;
-	  break;
-
-
-        case anychar:
-	  {
-	    int fastmap_newline = fastmap['\n'];
-
-	    /* `.' matches anything ...  */
-	    for (j = 0; j < (1 << BYTEWIDTH); j++)
-	      fastmap[j] = 1;
-
-	    /* ... except perhaps newline.  */
-	    if (!(bufp->syntax & RE_DOT_NEWLINE))
-	      fastmap['\n'] = fastmap_newline;
-
-	    /* Return if we have already set `can_be_null'; if we have,
-	       then the fastmap is irrelevant.  Something's wrong here.  */
-	    else if (bufp->can_be_null)
-	      goto done;
-
-	    /* Otherwise, have to check alternative paths.  */
-	    break;
-	  }
-
-#ifdef emacs
-        case syntaxspec:
-	  k = *p++;
-	  for (j = 0; j < (1 << BYTEWIDTH); j++)
-	    if (SYNTAX (j) == (enum syntaxcode) k)
-	      fastmap[j] = 1;
-	  break;
-
-
-	case notsyntaxspec:
-	  k = *p++;
-	  for (j = 0; j < (1 << BYTEWIDTH); j++)
-	    if (SYNTAX (j) != (enum syntaxcode) k)
-	      fastmap[j] = 1;
-	  break;
-
-
-      /* All cases after this match the empty string.  These end with
-         `continue'.  */
-
-
-	case before_dot:
-	case at_dot:
-	case after_dot:
-          continue;
-#endif /* not emacs */
-
-
-        case no_op:
-        case begline:
-        case endline:
-	case begbuf:
-	case endbuf:
-	case wordbound:
-	case notwordbound:
-	case wordbeg:
-	case wordend:
-        case push_dummy_failure:
-          continue;
-
-
-	case jump_n:
-        case pop_failure_jump:
-	case maybe_pop_jump:
-	case jump:
-        case jump_past_alt:
-	case dummy_failure_jump:
-          EXTRACT_NUMBER_AND_INCR (j, p);
-	  p += j;	
-	  if (j > 0)
-	    continue;
-            
-          /* Jump backward implies we just went through the body of a
-             loop and matched nothing.  Opcode jumped to should be
-             `on_failure_jump' or `succeed_n'.  Just treat it like an
-             ordinary jump.  For a * loop, it has pushed its failure
-             point already; if so, discard that as redundant.  */
-          if ((re_opcode_t) *p != on_failure_jump
-	      && (re_opcode_t) *p != succeed_n)
-	    continue;
-
-          p++;
-          EXTRACT_NUMBER_AND_INCR (j, p);
-          p += j;		
-	  
-          /* If what's on the stack is where we are now, pop it.  */
-          if (!FAIL_STACK_EMPTY () 
-	      && fail_stack.stack[fail_stack.avail - 1].pointer == p)
-            fail_stack.avail--;
-
-          continue;
-
-
-        case on_failure_jump:
-        case on_failure_keep_string_jump:
-	handle_on_failure_jump:
-          EXTRACT_NUMBER_AND_INCR (j, p);
-
-          /* For some patterns, e.g., `(a?)?', `p+j' here points to the
-             end of the pattern.  We don't want to push such a point,
-             since when we restore it above, entering the switch will
-             increment `p' past the end of the pattern.  We don't need
-             to push such a point since we obviously won't find any more
-             fastmap entries beyond `pend'.  Such a pattern can match
-             the null string, though.  */
-          if (p + j < pend)
-            {
-              if (!PUSH_PATTERN_OP (p + j, fail_stack))
-		{
-		  RESET_FAIL_STACK ();
-		  return -2;
-		}
-            }
-          else
-            bufp->can_be_null = 1;
-
-          if (succeed_n_p)
-            {
-              EXTRACT_NUMBER_AND_INCR (k, p);	/* Skip the n.  */
-              succeed_n_p = false;
-	    }
-
-          continue;
-
-
-	case succeed_n:
-          /* Get to the number of times to succeed.  */
-          p += 2;		
-
-          /* Increment p past the n for when k != 0.  */
-          EXTRACT_NUMBER_AND_INCR (k, p);
-          if (k == 0)
-	    {
-              p -= 4;
-  	      succeed_n_p = true;  /* Spaghetti code alert.  */
-              goto handle_on_failure_jump;
-            }
-          continue;
-
-
-	case set_number_at:
-          p += 4;
-          continue;
-
-
-	case start_memory:
-        case stop_memory:
-	  p += 2;
-	  continue;
-
-
-	default:
-          abort (); /* We have listed all the cases.  */
-        } /* switch *p++ */
-
-      /* Getting here means we have found the possible starting
-         characters for one path of the pattern -- and that the empty
-         string does not match.  We need not follow this path further.
-         Instead, look at the next alternative (remembered on the
-         stack), or quit if no more.  The test at the top of the loop
-         does these things.  */
-      path_can_be_null = false;
-      p = pend;
-    } /* while p */
-
-  /* Set `can_be_null' for the last path (also the first path, if the
-     pattern is empty).  */
-  bufp->can_be_null |= path_can_be_null;
-
- done:
-  RESET_FAIL_STACK ();
-  return 0;
-} /* re_compile_fastmap */
-
-/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
-   ENDS.  Subsequent matches using PATTERN_BUFFER and REGS will use
-   this memory for recording register information.  STARTS and ENDS
-   must be allocated using the malloc library routine, and must each
-   be at least NUM_REGS * sizeof (regoff_t) bytes long.
-
-   If NUM_REGS == 0, then subsequent matches should allocate their own
-   register data.
-
-   Unless this function is called, the first search or match using
-   PATTERN_BUFFER will allocate its own register data, without
-   freeing the old data.  */
-
-void
-re_set_registers (bufp, regs, num_regs, starts, ends)
-    struct re_pattern_buffer *bufp;
-    struct re_registers *regs;
-    unsigned num_regs;
-    regoff_t *starts, *ends;
-{
-  if (num_regs)
-    {
-      bufp->regs_allocated = REGS_REALLOCATE;
-      regs->num_regs = num_regs;
-      regs->start = starts;
-      regs->end = ends;
-    }
-  else
-    {
-      bufp->regs_allocated = REGS_UNALLOCATED;
-      regs->num_regs = 0;
-      regs->start = regs->end = (regoff_t *) 0;
-    }
-}
-
-/* Searching routines.  */
-
-/* Like re_search_2, below, but only one string is specified, and
-   doesn't let you say where to stop matching. */
-
-int
-re_search (bufp, string, size, startpos, range, regs)
-     struct re_pattern_buffer *bufp;
-     const char *string;
-     int size, startpos, range;
-     struct re_registers *regs;
-{
-  return re_search_2 (bufp, NULL, 0, string, size, startpos, range, 
-		      regs, size);
-}
-
-
-/* Using the compiled pattern in BUFP->buffer, first tries to match the
-   virtual concatenation of STRING1 and STRING2, starting first at index
-   STARTPOS, then at STARTPOS + 1, and so on.
-   
-   STRING1 and STRING2 have length SIZE1 and SIZE2, respectively.
-   
-   RANGE is how far to scan while trying to match.  RANGE = 0 means try
-   only at STARTPOS; in general, the last start tried is STARTPOS +
-   RANGE.
-   
-   In REGS, return the indices of the virtual concatenation of STRING1
-   and STRING2 that matched the entire BUFP->buffer and its contained
-   subexpressions.
-   
-   Do not consider matching one past the index STOP in the virtual
-   concatenation of STRING1 and STRING2.
-
-   We return either the position in the strings at which the match was
-   found, -1 if no match, or -2 if error (such as failure
-   stack overflow).  */
-
-int
-re_search_2 (bufp, string1, size1, string2, size2, startpos, range, regs, stop)
-     struct re_pattern_buffer *bufp;
-     const char *string1, *string2;
-     int size1, size2;
-     int startpos;
-     int range;
-     struct re_registers *regs;
-     int stop;
-{
-  int val;
-  register char *fastmap = bufp->fastmap;
-  register char *translate = bufp->translate;
-  int total_size = size1 + size2;
-  int endpos = startpos + range;
-
-  /* Check for out-of-range STARTPOS.  */
-  if (startpos < 0 || startpos > total_size)
-    return -1;
-    
-  /* Fix up RANGE if it might eventually take us outside
-     the virtual concatenation of STRING1 and STRING2.  */
-  if (endpos < -1)
-    range = -1 - startpos;
-  else if (endpos > total_size)
-    range = total_size - startpos;
-
-  /* If the search isn't to be a backwards one, don't waste time in a
-     search for a pattern that must be anchored.  */
-  if (bufp->used > 0 && (re_opcode_t) bufp->buffer[0] == begbuf && range > 0)
-    {
-      if (startpos > 0)
-	return -1;
-      else
-	range = 1;
-    }
-
-  /* Update the fastmap now if not correct already.  */
-  if (fastmap && !bufp->fastmap_accurate)
-    if (re_compile_fastmap (bufp) == -2)
-      return -2;
-  
-  /* Loop through the string, looking for a place to start matching.  */
-  for (;;)
-    { 
-      /* If a fastmap is supplied, skip quickly over characters that
-         cannot be the start of a match.  If the pattern can match the
-         null string, however, we don't need to skip characters; we want
-         the first null string.  */
-      if (fastmap && startpos < total_size && !bufp->can_be_null)
-	{
-	  if (range > 0)	/* Searching forwards.  */
-	    {
-	      register const char *d;
-	      register int lim = 0;
-	      int irange = range;
-
-              if (startpos < size1 && startpos + range >= size1)
-                lim = range - (size1 - startpos);
-
-	      d = (startpos >= size1 ? string2 - size1 : string1) + startpos;
-   
-              /* Written out as an if-else to avoid testing `translate'
-                 inside the loop.  */
-	      if (translate)
-                while (range > lim
-                       && !fastmap[(unsigned char)
-				   translate[(unsigned char) *d++]])
-                  range--;
-	      else
-                while (range > lim && !fastmap[(unsigned char) *d++])
-                  range--;
-
-	      startpos += irange - range;
-	    }
-	  else				/* Searching backwards.  */
-	    {
-	      register char c = (size1 == 0 || startpos >= size1
-                                 ? string2[startpos - size1] 
-                                 : string1[startpos]);
-
-	      if (!fastmap[(unsigned char) TRANSLATE (c)])
-		goto advance;
-	    }
-	}
-
-      /* If can't match the null string, and that's all we have left, fail.  */
-      if (range >= 0 && startpos == total_size && fastmap
-          && !bufp->can_be_null)
-	return -1;
-
-      val = re_match_2_internal (bufp, string1, size1, string2, size2,
-				 startpos, regs, stop);
-#ifndef REGEX_MALLOC
-#ifdef C_ALLOCA
-      alloca (0);
-#endif
-#endif
-
-      if (val >= 0)
-	return startpos;
-        
-      if (val == -2)
-	return -2;
-
-    advance:
-      if (!range) 
-        break;
-      else if (range > 0) 
-        {
-          range--; 
-          startpos++;
-        }
-      else
-        {
-          range++; 
-          startpos--;
-        }
-    }
-  return -1;
-} /* re_search_2 */
-
-/* Declarations and macros for re_match_2.  */
-
-static int bcmp_translate ();
-static boolean alt_match_null_string_p (),
-               common_op_match_null_string_p (),
-               group_match_null_string_p ();
-
-/* This converts PTR, a pointer into one of the search strings `string1'
-   and `string2' into an offset from the beginning of that string.  */
-#define POINTER_TO_OFFSET(ptr)			\
-  (FIRST_STRING_P (ptr)				\
-   ? ((regoff_t) ((ptr) - string1))		\
-   : ((regoff_t) ((ptr) - string2 + size1)))
-
-/* Macros for dealing with the split strings in re_match_2.  */
-
-#define MATCHING_IN_FIRST_STRING  (dend == end_match_1)
-
-/* Call before fetching a character with *d.  This switches over to
-   string2 if necessary.  */
-#define PREFETCH()							\
-  while (d == dend)						    	\
-    {									\
-      /* End of string2 => fail.  */					\
-      if (dend == end_match_2) 						\
-        goto fail;							\
-      /* End of string1 => advance to string2.  */ 			\
-      d = string2;						        \
-      dend = end_match_2;						\
-    }
-
-
-/* Test if at very beginning or at very end of the virtual concatenation
-   of `string1' and `string2'.  If only one string, it's `string2'.  */
-#define AT_STRINGS_BEG(d) ((d) == (size1 ? string1 : string2) || !size2)
-#define AT_STRINGS_END(d) ((d) == end2)	
-
-
-/* Test if D points to a character which is word-constituent.  We have
-   two special cases to check for: if past the end of string1, look at
-   the first character in string2; and if before the beginning of
-   string2, look at the last character in string1.  */
-#define WORDCHAR_P(d)							\
-  (SYNTAX ((d) == end1 ? *string2					\
-           : (d) == string2 - 1 ? *(end1 - 1) : *(d))			\
-   == Sword)
-
-/* Test if the character before D and the one at D differ with respect
-   to being word-constituent.  */
-#define AT_WORD_BOUNDARY(d)						\
-  (AT_STRINGS_BEG (d) || AT_STRINGS_END (d)				\
-   || WORDCHAR_P (d - 1) != WORDCHAR_P (d))
-
-
-/* Free everything we malloc.  */
-#ifdef MATCH_MAY_ALLOCATE
-#define FREE_VAR(var) if (var) REGEX_FREE (var); var = NULL
-#define FREE_VARIABLES()						\
-  do {									\
-    REGEX_FREE_STACK (fail_stack.stack);				\
-    FREE_VAR (regstart);						\
-    FREE_VAR (regend);							\
-    FREE_VAR (old_regstart);						\
-    FREE_VAR (old_regend);						\
-    FREE_VAR (best_regstart);						\
-    FREE_VAR (best_regend);						\
-    FREE_VAR (reg_info);						\
-    FREE_VAR (reg_dummy);						\
-    FREE_VAR (reg_info_dummy);						\
-  } while (0)
-#else
-#define FREE_VARIABLES() /* Do nothing!  */
-#endif /* not MATCH_MAY_ALLOCATE */
-
-/* These values must meet several constraints.  They must not be valid
-   register values; since we have a limit of 255 registers (because
-   we use only one byte in the pattern for the register number), we can
-   use numbers larger than 255.  They must differ by 1, because of
-   NUM_FAILURE_ITEMS above.  And the value for the lowest register must
-   be larger than the value for the highest register, so we do not try
-   to actually save any registers when none are active.  */
-#define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH)
-#define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1)
-
-/* Matching routines.  */
-
-#ifndef emacs   /* Emacs never uses this.  */
-/* re_match is like re_match_2 except it takes only a single string.  */
-
-int
-re_match (bufp, string, size, pos, regs)
-     struct re_pattern_buffer *bufp;
-     const char *string;
-     int size, pos;
-     struct re_registers *regs;
-{
-  int result = re_match_2_internal (bufp, NULL, 0, string, size,
-				    pos, regs, size);
-  alloca (0);
-  return result;
-}
-#endif /* not emacs */
-
-
-/* re_match_2 matches the compiled pattern in BUFP against the
-   the (virtual) concatenation of STRING1 and STRING2 (of length SIZE1
-   and SIZE2, respectively).  We start matching at POS, and stop
-   matching at STOP.
-   
-   If REGS is non-null and the `no_sub' field of BUFP is nonzero, we
-   store offsets for the substring each group matched in REGS.  See the
-   documentation for exactly how many groups we fill.
-
-   We return -1 if no match, -2 if an internal error (such as the
-   failure stack overflowing).  Otherwise, we return the length of the
-   matched substring.  */
-
-int
-re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
-     struct re_pattern_buffer *bufp;
-     const char *string1, *string2;
-     int size1, size2;
-     int pos;
-     struct re_registers *regs;
-     int stop;
-{
-  int result = re_match_2_internal (bufp, string1, size1, string2, size2,
-				    pos, regs, stop);
-  alloca (0);
-  return result;
-}
-
-/* This is a separate function so that we can force an alloca cleanup
-   afterwards.  */
-static int
-re_match_2_internal (bufp, string1, size1, string2, size2, pos, regs, stop)
-     struct re_pattern_buffer *bufp;
-     const char *string1, *string2;
-     int size1, size2;
-     int pos;
-     struct re_registers *regs;
-     int stop;
-{
-  /* General temporaries.  */
-  int mcnt;
-  unsigned char *p1;
-
-  /* Just past the end of the corresponding string.  */
-  const char *end1, *end2;
-
-  /* Pointers into string1 and string2, just past the last characters in
-     each to consider matching.  */
-  const char *end_match_1, *end_match_2;
-
-  /* Where we are in the data, and the end of the current string.  */
-  const char *d, *dend;
-  
-  /* Where we are in the pattern, and the end of the pattern.  */
-  unsigned char *p = bufp->buffer;
-  register unsigned char *pend = p + bufp->used;
-
-  /* Mark the opcode just after a start_memory, so we can test for an
-     empty subpattern when we get to the stop_memory.  */
-  unsigned char *just_past_start_mem = 0;
-
-  /* We use this to map every character in the string.  */
-  char *translate = bufp->translate;
-
-  /* Failure point stack.  Each place that can handle a failure further
-     down the line pushes a failure point on this stack.  It consists of
-     restart, regend, and reg_info for all registers corresponding to
-     the subexpressions we're currently inside, plus the number of such
-     registers, and, finally, two char *'s.  The first char * is where
-     to resume scanning the pattern; the second one is where to resume
-     scanning the strings.  If the latter is zero, the failure point is
-     a ``dummy''; if a failure happens and the failure point is a dummy,
-     it gets discarded and the next next one is tried.  */
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global.  */
-  fail_stack_type fail_stack;
-#endif
-#ifdef DEBUG
-  static unsigned failure_id = 0;
-  unsigned nfailure_points_pushed = 0, nfailure_points_popped = 0;
-#endif
-
-  /* This holds the pointer to the failure stack, when
-     it is allocated relocatably.  */
-  fail_stack_elt_t *failure_stack_ptr;
-
-  /* We fill all the registers internally, independent of what we
-     return, for use in backreferences.  The number here includes
-     an element for register zero.  */
-  unsigned num_regs = bufp->re_nsub + 1;
-  
-  /* The currently active registers.  */
-  unsigned lowest_active_reg = NO_LOWEST_ACTIVE_REG;
-  unsigned highest_active_reg = NO_HIGHEST_ACTIVE_REG;
-
-  /* Information on the contents of registers. These are pointers into
-     the input strings; they record just what was matched (on this
-     attempt) by a subexpression part of the pattern, that is, the
-     regnum-th regstart pointer points to where in the pattern we began
-     matching and the regnum-th regend points to right after where we
-     stopped matching the regnum-th subexpression.  (The zeroth register
-     keeps track of what the whole pattern matches.)  */
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
-  const char **regstart, **regend;
-#endif
-
-  /* If a group that's operated upon by a repetition operator fails to
-     match anything, then the register for its start will need to be
-     restored because it will have been set to wherever in the string we
-     are when we last see its open-group operator.  Similarly for a
-     register's end.  */
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
-  const char **old_regstart, **old_regend;
-#endif
-
-  /* The is_active field of reg_info helps us keep track of which (possibly
-     nested) subexpressions we are currently in. The matched_something
-     field of reg_info[reg_num] helps us tell whether or not we have
-     matched any of the pattern so far this time through the reg_num-th
-     subexpression.  These two fields get reset each time through any
-     loop their register is in.  */
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global.  */
-  register_info_type *reg_info; 
-#endif
-
-  /* The following record the register info as found in the above
-     variables when we find a match better than any we've seen before. 
-     This happens as we backtrack through the failure points, which in
-     turn happens only if we have not yet matched the entire string. */
-  unsigned best_regs_set = false;
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
-  const char **best_regstart, **best_regend;
-#endif
-  
-  /* Logically, this is `best_regend[0]'.  But we don't want to have to
-     allocate space for that if we're not allocating space for anything
-     else (see below).  Also, we never need info about register 0 for
-     any of the other register vectors, and it seems rather a kludge to
-     treat `best_regend' differently than the rest.  So we keep track of
-     the end of the best match so far in a separate variable.  We
-     initialize this to NULL so that when we backtrack the first time
-     and need to test it, it's not garbage.  */
-  const char *match_end = NULL;
-
-  /* This helps SET_REGS_MATCHED avoid doing redundant work.  */
-  int set_regs_matched_done = 0;
-
-  /* Used when we pop values we don't care about.  */
-#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
-  const char **reg_dummy;
-  register_info_type *reg_info_dummy;
-#endif
-
-#ifdef DEBUG
-  /* Counts the total number of registers pushed.  */
-  unsigned num_regs_pushed = 0; 	
-#endif
-
-  DEBUG_PRINT1 ("\n\nEntering re_match_2.\n");
-  
-  INIT_FAIL_STACK ();
-  
-#ifdef MATCH_MAY_ALLOCATE
-  /* Do not bother to initialize all the register variables if there are
-     no groups in the pattern, as it takes a fair amount of time.  If
-     there are groups, we include space for register 0 (the whole
-     pattern), even though we never use it, since it simplifies the
-     array indexing.  We should fix this.  */
-  if (bufp->re_nsub)
-    {
-      regstart = REGEX_TALLOC (num_regs, const char *);
-      regend = REGEX_TALLOC (num_regs, const char *);
-      old_regstart = REGEX_TALLOC (num_regs, const char *);
-      old_regend = REGEX_TALLOC (num_regs, const char *);
-      best_regstart = REGEX_TALLOC (num_regs, const char *);
-      best_regend = REGEX_TALLOC (num_regs, const char *);
-      reg_info = REGEX_TALLOC (num_regs, register_info_type);
-      reg_dummy = REGEX_TALLOC (num_regs, const char *);
-      reg_info_dummy = REGEX_TALLOC (num_regs, register_info_type);
-
-      if (!(regstart && regend && old_regstart && old_regend && reg_info 
-            && best_regstart && best_regend && reg_dummy && reg_info_dummy)) 
-        {
-          FREE_VARIABLES ();
-          return -2;
-        }
-    }
-  else
-    {
-      /* We must initialize all our variables to NULL, so that
-         `FREE_VARIABLES' doesn't try to free them.  */
-      regstart = regend = old_regstart = old_regend = best_regstart
-        = best_regend = reg_dummy = NULL;
-      reg_info = reg_info_dummy = (register_info_type *) NULL;
-    }
-#endif /* MATCH_MAY_ALLOCATE */
-
-  /* The starting position is bogus.  */
-  if (pos < 0 || pos > size1 + size2)
-    {
-      FREE_VARIABLES ();
-      return -1;
-    }
-    
-  /* Initialize subexpression text positions to -1 to mark ones that no
-     start_memory/stop_memory has been seen for. Also initialize the
-     register information struct.  */
-  for (mcnt = 1; mcnt < num_regs; mcnt++)
-    {
-      regstart[mcnt] = regend[mcnt] 
-        = old_regstart[mcnt] = old_regend[mcnt] = REG_UNSET_VALUE;
-        
-      REG_MATCH_NULL_STRING_P (reg_info[mcnt]) = MATCH_NULL_UNSET_VALUE;
-      IS_ACTIVE (reg_info[mcnt]) = 0;
-      MATCHED_SOMETHING (reg_info[mcnt]) = 0;
-      EVER_MATCHED_SOMETHING (reg_info[mcnt]) = 0;
-    }
-  
-  /* We move `string1' into `string2' if the latter's empty -- but not if
-     `string1' is null.  */
-  if (size2 == 0 && string1 != NULL)
-    {
-      string2 = string1;
-      size2 = size1;
-      string1 = 0;
-      size1 = 0;
-    }
-  end1 = string1 + size1;
-  end2 = string2 + size2;
-
-  /* Compute where to stop matching, within the two strings.  */
-  if (stop <= size1)
-    {
-      end_match_1 = string1 + stop;
-      end_match_2 = string2;
-    }
-  else
-    {
-      end_match_1 = end1;
-      end_match_2 = string2 + stop - size1;
-    }
-
-  /* `p' scans through the pattern as `d' scans through the data. 
-     `dend' is the end of the input string that `d' points within.  `d'
-     is advanced into the following input string whenever necessary, but
-     this happens before fetching; therefore, at the beginning of the
-     loop, `d' can be pointing at the end of a string, but it cannot
-     equal `string2'.  */
-  if (size1 > 0 && pos <= size1)
-    {
-      d = string1 + pos;
-      dend = end_match_1;
-    }
-  else
-    {
-      d = string2 + pos - size1;
-      dend = end_match_2;
-    }
-
-  DEBUG_PRINT1 ("The compiled pattern is: ");
-  DEBUG_PRINT_COMPILED_PATTERN (bufp, p, pend);
-  DEBUG_PRINT1 ("The string to match is: `");
-  DEBUG_PRINT_DOUBLE_STRING (d, string1, size1, string2, size2);
-  DEBUG_PRINT1 ("'\n");
-  
-  /* This loops over pattern commands.  It exits by returning from the
-     function if the match is complete, or it drops through if the match
-     fails at this starting point in the input data.  */
-  for (;;)
-    {
-      DEBUG_PRINT2 ("\n0x%x: ", p);
-
-      if (p == pend)
-	{ /* End of pattern means we might have succeeded.  */
-          DEBUG_PRINT1 ("end of pattern ... ");
-          
-	  /* If we haven't matched the entire string, and we want the
-             longest match, try backtracking.  */
-          if (d != end_match_2)
-	    {
-	      /* 1 if this match ends in the same string (string1 or string2)
-		 as the best previous match.  */
-	      boolean same_str_p = (FIRST_STRING_P (match_end) 
-				    == MATCHING_IN_FIRST_STRING);
-	      /* 1 if this match is the best seen so far.  */
-	      boolean best_match_p;
-
-	      /* AIX compiler got confused when this was combined
-		 with the previous declaration.  */
-	      if (same_str_p)
-		best_match_p = d > match_end;
-	      else
-		best_match_p = !MATCHING_IN_FIRST_STRING;
-
-              DEBUG_PRINT1 ("backtracking.\n");
-              
-              if (!FAIL_STACK_EMPTY ())
-                { /* More failure points to try.  */
-
-                  /* If exceeds best match so far, save it.  */
-                  if (!best_regs_set || best_match_p)
-                    {
-                      best_regs_set = true;
-                      match_end = d;
-                      
-                      DEBUG_PRINT1 ("\nSAVING match as best so far.\n");
-                      
-                      for (mcnt = 1; mcnt < num_regs; mcnt++)
-                        {
-                          best_regstart[mcnt] = regstart[mcnt];
-                          best_regend[mcnt] = regend[mcnt];
-                        }
-                    }
-                  goto fail;	       
-                }
-
-              /* If no failure points, don't restore garbage.  And if
-                 last match is real best match, don't restore second
-                 best one. */
-              else if (best_regs_set && !best_match_p)
-                {
-  	        restore_best_regs:
-                  /* Restore best match.  It may happen that `dend ==
-                     end_match_1' while the restored d is in string2.
-                     For example, the pattern `x.*y.*z' against the
-                     strings `x-' and `y-z-', if the two strings are
-                     not consecutive in memory.  */
-                  DEBUG_PRINT1 ("Restoring best registers.\n");
-                  
-                  d = match_end;
-                  dend = ((d >= string1 && d <= end1)
-		           ? end_match_1 : end_match_2);
-
-		  for (mcnt = 1; mcnt < num_regs; mcnt++)
-		    {
-		      regstart[mcnt] = best_regstart[mcnt];
-		      regend[mcnt] = best_regend[mcnt];
-		    }
-                }
-            } /* d != end_match_2 */
-
-	succeed_label:
-          DEBUG_PRINT1 ("Accepting match.\n");
-
-          /* If caller wants register contents data back, do it.  */
-          if (regs && !bufp->no_sub)
-	    {
-              /* Have the register data arrays been allocated?  */
-              if (bufp->regs_allocated == REGS_UNALLOCATED)
-                { /* No.  So allocate them with malloc.  We need one
-                     extra element beyond `num_regs' for the `-1' marker
-                     GNU code uses.  */
-                  regs->num_regs = MAX (RE_NREGS, num_regs + 1);
-                  regs->start = TALLOC (regs->num_regs, regoff_t);
-                  regs->end = TALLOC (regs->num_regs, regoff_t);
-                  if (regs->start == NULL || regs->end == NULL)
-		    {
-		      FREE_VARIABLES ();
-		      return -2;
-		    }
-                  bufp->regs_allocated = REGS_REALLOCATE;
-                }
-              else if (bufp->regs_allocated == REGS_REALLOCATE)
-                { /* Yes.  If we need more elements than were already
-                     allocated, reallocate them.  If we need fewer, just
-                     leave it alone.  */
-                  if (regs->num_regs < num_regs + 1)
-                    {
-                      regs->num_regs = num_regs + 1;
-                      RETALLOC (regs->start, regs->num_regs, regoff_t);
-                      RETALLOC (regs->end, regs->num_regs, regoff_t);
-                      if (regs->start == NULL || regs->end == NULL)
-			{
-			  FREE_VARIABLES ();
-			  return -2;
-			}
-                    }
-                }
-              else
-		{
-		  /* These braces fend off a "empty body in an else-statement"
-		     warning under GCC when assert expands to nothing.  */
-		  assert (bufp->regs_allocated == REGS_FIXED);
-		}
-
-              /* Convert the pointer data in `regstart' and `regend' to
-                 indices.  Register zero has to be set differently,
-                 since we haven't kept track of any info for it.  */
-              if (regs->num_regs > 0)
-                {
-                  regs->start[0] = pos;
-                  regs->end[0] = (MATCHING_IN_FIRST_STRING
-				  ? ((regoff_t) (d - string1))
-			          : ((regoff_t) (d - string2 + size1)));
-                }
-              
-              /* Go through the first `min (num_regs, regs->num_regs)'
-                 registers, since that is all we initialized.  */
-	      for (mcnt = 1; mcnt < MIN (num_regs, regs->num_regs); mcnt++)
-		{
-                  if (REG_UNSET (regstart[mcnt]) || REG_UNSET (regend[mcnt]))
-                    regs->start[mcnt] = regs->end[mcnt] = -1;
-                  else
-                    {
-		      regs->start[mcnt]
-			= (regoff_t) POINTER_TO_OFFSET (regstart[mcnt]);
-                      regs->end[mcnt]
-			= (regoff_t) POINTER_TO_OFFSET (regend[mcnt]);
-                    }
-		}
-              
-              /* If the regs structure we return has more elements than
-                 were in the pattern, set the extra elements to -1.  If
-                 we (re)allocated the registers, this is the case,
-                 because we always allocate enough to have at least one
-                 -1 at the end.  */
-              for (mcnt = num_regs; mcnt < regs->num_regs; mcnt++)
-                regs->start[mcnt] = regs->end[mcnt] = -1;
-	    } /* regs && !bufp->no_sub */
-
-          DEBUG_PRINT4 ("%u failure points pushed, %u popped (%u remain).\n",
-                        nfailure_points_pushed, nfailure_points_popped,
-                        nfailure_points_pushed - nfailure_points_popped);
-          DEBUG_PRINT2 ("%u registers pushed.\n", num_regs_pushed);
-
-          mcnt = d - pos - (MATCHING_IN_FIRST_STRING 
-			    ? string1 
-			    : string2 - size1);
-
-          DEBUG_PRINT2 ("Returning %d from re_match_2.\n", mcnt);
-
-          FREE_VARIABLES ();
-          return mcnt;
-        }
-
-      /* Otherwise match next pattern command.  */
-      switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
-	{
-        /* Ignore these.  Used to ignore the n of succeed_n's which
-           currently have n == 0.  */
-        case no_op:
-          DEBUG_PRINT1 ("EXECUTING no_op.\n");
-          break;
-
-	case succeed:
-          DEBUG_PRINT1 ("EXECUTING succeed.\n");
-	  goto succeed_label;
-
-        /* Match the next n pattern characters exactly.  The following
-           byte in the pattern defines n, and the n bytes after that
-           are the characters to match.  */
-	case exactn:
-	  mcnt = *p++;
-          DEBUG_PRINT2 ("EXECUTING exactn %d.\n", mcnt);
-
-          /* This is written out as an if-else so we don't waste time
-             testing `translate' inside the loop.  */
-          if (translate)
-	    {
-	      do
-		{
-		  PREFETCH ();
-		  if (translate[(unsigned char) *d++] != (char) *p++)
-                    goto fail;
-		}
-	      while (--mcnt);
-	    }
-	  else
-	    {
-	      do
-		{
-		  PREFETCH ();
-		  if (*d++ != (char) *p++) goto fail;
-		}
-	      while (--mcnt);
-	    }
-	  SET_REGS_MATCHED ();
-          break;
-
-
-        /* Match any character except possibly a newline or a null.  */
-	case anychar:
-          DEBUG_PRINT1 ("EXECUTING anychar.\n");
-
-          PREFETCH ();
-
-          if ((!(bufp->syntax & RE_DOT_NEWLINE) && TRANSLATE (*d) == '\n')
-              || (bufp->syntax & RE_DOT_NOT_NULL && TRANSLATE (*d) == '\000'))
-	    goto fail;
-
-          SET_REGS_MATCHED ();
-          DEBUG_PRINT2 ("  Matched `%d'.\n", *d);
-          d++;
-	  break;
-
-
-	case charset:
-	case charset_not:
-	  {
-	    register unsigned char c;
-	    boolean not = (re_opcode_t) *(p - 1) == charset_not;
-
-            DEBUG_PRINT2 ("EXECUTING charset%s.\n", not ? "_not" : "");
-
-	    PREFETCH ();
-	    c = TRANSLATE (*d); /* The character to match.  */
-
-            /* Cast to `unsigned' instead of `unsigned char' in case the
-               bit list is a full 32 bytes long.  */
-	    if (c < (unsigned) (*p * BYTEWIDTH)
-		&& p[1 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
-	      not = !not;
-
-	    p += 1 + *p;
-
-	    if (!not) goto fail;
-            
-	    SET_REGS_MATCHED ();
-            d++;
-	    break;
-	  }
-
-
-        /* The beginning of a group is represented by start_memory.
-           The arguments are the register number in the next byte, and the
-           number of groups inner to this one in the next.  The text
-           matched within the group is recorded (in the internal
-           registers data structure) under the register number.  */
-        case start_memory:
-	  DEBUG_PRINT3 ("EXECUTING start_memory %d (%d):\n", *p, p[1]);
-
-          /* Find out if this group can match the empty string.  */
-	  p1 = p;		/* To send to group_match_null_string_p.  */
-          
-          if (REG_MATCH_NULL_STRING_P (reg_info[*p]) == MATCH_NULL_UNSET_VALUE)
-            REG_MATCH_NULL_STRING_P (reg_info[*p]) 
-              = group_match_null_string_p (&p1, pend, reg_info);
-
-          /* Save the position in the string where we were the last time
-             we were at this open-group operator in case the group is
-             operated upon by a repetition operator, e.g., with `(a*)*b'
-             against `ab'; then we want to ignore where we are now in
-             the string in case this attempt to match fails.  */
-          old_regstart[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
-                             ? REG_UNSET (regstart[*p]) ? d : regstart[*p]
-                             : regstart[*p];
-	  DEBUG_PRINT2 ("  old_regstart: %d\n", 
-			 POINTER_TO_OFFSET (old_regstart[*p]));
-
-          regstart[*p] = d;
-	  DEBUG_PRINT2 ("  regstart: %d\n", POINTER_TO_OFFSET (regstart[*p]));
-
-          IS_ACTIVE (reg_info[*p]) = 1;
-          MATCHED_SOMETHING (reg_info[*p]) = 0;
-
-	  /* Clear this whenever we change the register activity status.  */
-	  set_regs_matched_done = 0;
-          
-          /* This is the new highest active register.  */
-          highest_active_reg = *p;
-          
-          /* If nothing was active before, this is the new lowest active
-             register.  */
-          if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
-            lowest_active_reg = *p;
-
-          /* Move past the register number and inner group count.  */
-          p += 2;
-	  just_past_start_mem = p;
-
-          break;
-
-
-        /* The stop_memory opcode represents the end of a group.  Its
-           arguments are the same as start_memory's: the register
-           number, and the number of inner groups.  */
-	case stop_memory:
-	  DEBUG_PRINT3 ("EXECUTING stop_memory %d (%d):\n", *p, p[1]);
-             
-          /* We need to save the string position the last time we were at
-             this close-group operator in case the group is operated
-             upon by a repetition operator, e.g., with `((a*)*(b*)*)*'
-             against `aba'; then we want to ignore where we are now in
-             the string in case this attempt to match fails.  */
-          old_regend[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
-                           ? REG_UNSET (regend[*p]) ? d : regend[*p]
-			   : regend[*p];
-	  DEBUG_PRINT2 ("      old_regend: %d\n", 
-			 POINTER_TO_OFFSET (old_regend[*p]));
-
-          regend[*p] = d;
-	  DEBUG_PRINT2 ("      regend: %d\n", POINTER_TO_OFFSET (regend[*p]));
-
-          /* This register isn't active anymore.  */
-          IS_ACTIVE (reg_info[*p]) = 0;
-
-	  /* Clear this whenever we change the register activity status.  */
-	  set_regs_matched_done = 0;
-
-          /* If this was the only register active, nothing is active
-             anymore.  */
-          if (lowest_active_reg == highest_active_reg)
-            {
-              lowest_active_reg = NO_LOWEST_ACTIVE_REG;
-              highest_active_reg = NO_HIGHEST_ACTIVE_REG;
-            }
-          else
-            { /* We must scan for the new highest active register, since
-                 it isn't necessarily one less than now: consider
-                 (a(b)c(d(e)f)g).  When group 3 ends, after the f), the
-                 new highest active register is 1.  */
-              unsigned char r = *p - 1;
-              while (r > 0 && !IS_ACTIVE (reg_info[r]))
-                r--;
-              
-              /* If we end up at register zero, that means that we saved
-                 the registers as the result of an `on_failure_jump', not
-                 a `start_memory', and we jumped to past the innermost
-                 `stop_memory'.  For example, in ((.)*) we save
-                 registers 1 and 2 as a result of the *, but when we pop
-                 back to the second ), we are at the stop_memory 1.
-                 Thus, nothing is active.  */
-	      if (r == 0)
-                {
-                  lowest_active_reg = NO_LOWEST_ACTIVE_REG;
-                  highest_active_reg = NO_HIGHEST_ACTIVE_REG;
-                }
-              else
-                highest_active_reg = r;
-            }
-          
-          /* If just failed to match something this time around with a
-             group that's operated on by a repetition operator, try to
-             force exit from the ``loop'', and restore the register
-             information for this group that we had before trying this
-             last match.  */
-          if ((!MATCHED_SOMETHING (reg_info[*p])
-               || just_past_start_mem == p - 1)
-	      && (p + 2) < pend)              
-            {
-              boolean is_a_jump_n = false;
-              
-              p1 = p + 2;
-              mcnt = 0;
-              switch ((re_opcode_t) *p1++)
-                {
-                  case jump_n:
-		    is_a_jump_n = true;
-                  case pop_failure_jump:
-		  case maybe_pop_jump:
-		  case jump:
-		  case dummy_failure_jump:
-                    EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-		    if (is_a_jump_n)
-		      p1 += 2;
-                    break;
-                  
-                  default:
-                    /* do nothing */ ;
-                }
-	      p1 += mcnt;
-        
-              /* If the next operation is a jump backwards in the pattern
-	         to an on_failure_jump right before the start_memory
-                 corresponding to this stop_memory, exit from the loop
-                 by forcing a failure after pushing on the stack the
-                 on_failure_jump's jump in the pattern, and d.  */
-              if (mcnt < 0 && (re_opcode_t) *p1 == on_failure_jump
-                  && (re_opcode_t) p1[3] == start_memory && p1[4] == *p)
-		{
-                  /* If this group ever matched anything, then restore
-                     what its registers were before trying this last
-                     failed match, e.g., with `(a*)*b' against `ab' for
-                     regstart[1], and, e.g., with `((a*)*(b*)*)*'
-                     against `aba' for regend[3].
-                     
-                     Also restore the registers for inner groups for,
-                     e.g., `((a*)(b*))*' against `aba' (register 3 would
-                     otherwise get trashed).  */
-                     
-                  if (EVER_MATCHED_SOMETHING (reg_info[*p]))
-		    {
-		      unsigned r; 
-        
-                      EVER_MATCHED_SOMETHING (reg_info[*p]) = 0;
-                      
-		      /* Restore this and inner groups' (if any) registers.  */
-                      for (r = *p; r < *p + *(p + 1); r++)
-                        {
-                          regstart[r] = old_regstart[r];
-
-                          /* xx why this test?  */
-                          if (old_regend[r] >= regstart[r])
-                            regend[r] = old_regend[r];
-                        }     
-                    }
-		  p1++;
-                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-                  PUSH_FAILURE_POINT (p1 + mcnt, d, -2);
-
-                  goto fail;
-                }
-            }
-          
-          /* Move past the register number and the inner group count.  */
-          p += 2;
-          break;
-
-
-	/* \<digit> has been turned into a `duplicate' command which is
-           followed by the numeric value of <digit> as the register number.  */
-        case duplicate:
-	  {
-	    register const char *d2, *dend2;
-	    int regno = *p++;   /* Get which register to match against.  */
-	    DEBUG_PRINT2 ("EXECUTING duplicate %d.\n", regno);
-
-	    /* Can't back reference a group which we've never matched.  */
-            if (REG_UNSET (regstart[regno]) || REG_UNSET (regend[regno]))
-              goto fail;
-              
-            /* Where in input to try to start matching.  */
-            d2 = regstart[regno];
-            
-            /* Where to stop matching; if both the place to start and
-               the place to stop matching are in the same string, then
-               set to the place to stop, otherwise, for now have to use
-               the end of the first string.  */
-
-            dend2 = ((FIRST_STRING_P (regstart[regno]) 
-		      == FIRST_STRING_P (regend[regno]))
-		     ? regend[regno] : end_match_1);
-	    for (;;)
-	      {
-		/* If necessary, advance to next segment in register
-                   contents.  */
-		while (d2 == dend2)
-		  {
-		    if (dend2 == end_match_2) break;
-		    if (dend2 == regend[regno]) break;
-
-                    /* End of string1 => advance to string2. */
-                    d2 = string2;
-                    dend2 = regend[regno];
-		  }
-		/* At end of register contents => success */
-		if (d2 == dend2) break;
-
-		/* If necessary, advance to next segment in data.  */
-		PREFETCH ();
-
-		/* How many characters left in this segment to match.  */
-		mcnt = dend - d;
-                
-		/* Want how many consecutive characters we can match in
-                   one shot, so, if necessary, adjust the count.  */
-                if (mcnt > dend2 - d2)
-		  mcnt = dend2 - d2;
-                  
-		/* Compare that many; failure if mismatch, else move
-                   past them.  */
-		if (translate 
-                    ? bcmp_translate (d, d2, mcnt, translate) 
-                    : bcmp (d, d2, mcnt))
-		  goto fail;
-		d += mcnt, d2 += mcnt;
-
-		/* Do this because we've match some characters.  */
-		SET_REGS_MATCHED ();
-	      }
-	  }
-	  break;
-
-
-        /* begline matches the empty string at the beginning of the string
-           (unless `not_bol' is set in `bufp'), and, if
-           `newline_anchor' is set, after newlines.  */
-	case begline:
-          DEBUG_PRINT1 ("EXECUTING begline.\n");
-          
-          if (AT_STRINGS_BEG (d))
-            {
-              if (!bufp->not_bol) break;
-            }
-          else if (d[-1] == '\n' && bufp->newline_anchor)
-            {
-              break;
-            }
-          /* In all other cases, we fail.  */
-          goto fail;
-
-
-        /* endline is the dual of begline.  */
-	case endline:
-          DEBUG_PRINT1 ("EXECUTING endline.\n");
-
-          if (AT_STRINGS_END (d))
-            {
-              if (!bufp->not_eol) break;
-            }
-          
-          /* We have to ``prefetch'' the next character.  */
-          else if ((d == end1 ? *string2 : *d) == '\n'
-                   && bufp->newline_anchor)
-            {
-              break;
-            }
-          goto fail;
-
-
-	/* Match at the very beginning of the data.  */
-        case begbuf:
-          DEBUG_PRINT1 ("EXECUTING begbuf.\n");
-          if (AT_STRINGS_BEG (d))
-            break;
-          goto fail;
-
-
-	/* Match at the very end of the data.  */
-        case endbuf:
-          DEBUG_PRINT1 ("EXECUTING endbuf.\n");
-	  if (AT_STRINGS_END (d))
-	    break;
-          goto fail;
-
-
-        /* on_failure_keep_string_jump is used to optimize `.*\n'.  It
-           pushes NULL as the value for the string on the stack.  Then
-           `pop_failure_point' will keep the current value for the
-           string, instead of restoring it.  To see why, consider
-           matching `foo\nbar' against `.*\n'.  The .* matches the foo;
-           then the . fails against the \n.  But the next thing we want
-           to do is match the \n against the \n; if we restored the
-           string value, we would be back at the foo.
-           
-           Because this is used only in specific cases, we don't need to
-           check all the things that `on_failure_jump' does, to make
-           sure the right things get saved on the stack.  Hence we don't
-           share its code.  The only reason to push anything on the
-           stack at all is that otherwise we would have to change
-           `anychar's code to do something besides goto fail in this
-           case; that seems worse than this.  */
-        case on_failure_keep_string_jump:
-          DEBUG_PRINT1 ("EXECUTING on_failure_keep_string_jump");
-          
-          EXTRACT_NUMBER_AND_INCR (mcnt, p);
-          DEBUG_PRINT3 (" %d (to 0x%x):\n", mcnt, p + mcnt);
-
-          PUSH_FAILURE_POINT (p + mcnt, NULL, -2);
-          break;
-
-
-	/* Uses of on_failure_jump:
-        
-           Each alternative starts with an on_failure_jump that points
-           to the beginning of the next alternative.  Each alternative
-           except the last ends with a jump that in effect jumps past
-           the rest of the alternatives.  (They really jump to the
-           ending jump of the following alternative, because tensioning
-           these jumps is a hassle.)
-
-           Repeats start with an on_failure_jump that points past both
-           the repetition text and either the following jump or
-           pop_failure_jump back to this on_failure_jump.  */
-	case on_failure_jump:
-        on_failure:
-          DEBUG_PRINT1 ("EXECUTING on_failure_jump");
-
-          EXTRACT_NUMBER_AND_INCR (mcnt, p);
-          DEBUG_PRINT3 (" %d (to 0x%x)", mcnt, p + mcnt);
-
-          /* If this on_failure_jump comes right before a group (i.e.,
-             the original * applied to a group), save the information
-             for that group and all inner ones, so that if we fail back
-             to this point, the group's information will be correct.
-             For example, in \(a*\)*\1, we need the preceding group,
-             and in \(\(a*\)b*\)\2, we need the inner group.  */
-
-          /* We can't use `p' to check ahead because we push
-             a failure point to `p + mcnt' after we do this.  */
-          p1 = p;
-
-          /* We need to skip no_op's before we look for the
-             start_memory in case this on_failure_jump is happening as
-             the result of a completed succeed_n, as in \(a\)\{1,3\}b\1
-             against aba.  */
-          while (p1 < pend && (re_opcode_t) *p1 == no_op)
-            p1++;
-
-          if (p1 < pend && (re_opcode_t) *p1 == start_memory)
-            {
-              /* We have a new highest active register now.  This will
-                 get reset at the start_memory we are about to get to,
-                 but we will have saved all the registers relevant to
-                 this repetition op, as described above.  */
-              highest_active_reg = *(p1 + 1) + *(p1 + 2);
-              if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
-                lowest_active_reg = *(p1 + 1);
-            }
-
-          DEBUG_PRINT1 (":\n");
-          PUSH_FAILURE_POINT (p + mcnt, d, -2);
-          break;
-
-
-        /* A smart repeat ends with `maybe_pop_jump'.
-	   We change it to either `pop_failure_jump' or `jump'.  */
-        case maybe_pop_jump:
-          EXTRACT_NUMBER_AND_INCR (mcnt, p);
-          DEBUG_PRINT2 ("EXECUTING maybe_pop_jump %d.\n", mcnt);
-          {
-	    register unsigned char *p2 = p;
-
-            /* Compare the beginning of the repeat with what in the
-               pattern follows its end. If we can establish that there
-               is nothing that they would both match, i.e., that we
-               would have to backtrack because of (as in, e.g., `a*a')
-               then we can change to pop_failure_jump, because we'll
-               never have to backtrack.
-               
-               This is not true in the case of alternatives: in
-               `(a|ab)*' we do need to backtrack to the `ab' alternative
-               (e.g., if the string was `ab').  But instead of trying to
-               detect that here, the alternative has put on a dummy
-               failure point which is what we will end up popping.  */
-
-	    /* Skip over open/close-group commands.
-	       If what follows this loop is a ...+ construct,
-	       look at what begins its body, since we will have to
-	       match at least one of that.  */
-	    while (1)
-	      {
-		if (p2 + 2 < pend
-		    && ((re_opcode_t) *p2 == stop_memory
-			|| (re_opcode_t) *p2 == start_memory))
-		  p2 += 3;
-		else if (p2 + 6 < pend
-			 && (re_opcode_t) *p2 == dummy_failure_jump)
-		  p2 += 6;
-		else
-		  break;
-	      }
-
-	    p1 = p + mcnt;
-	    /* p1[0] ... p1[2] are the `on_failure_jump' corresponding
-	       to the `maybe_finalize_jump' of this case.  Examine what 
-	       follows.  */
-
-            /* If we're at the end of the pattern, we can change.  */
-            if (p2 == pend)
-	      {
-		/* Consider what happens when matching ":\(.*\)"
-		   against ":/".  I don't really understand this code
-		   yet.  */
-  	        p[-3] = (unsigned char) pop_failure_jump;
-                DEBUG_PRINT1
-                  ("  End of pattern: change to `pop_failure_jump'.\n");
-              }
-
-            else if ((re_opcode_t) *p2 == exactn
-		     || (bufp->newline_anchor && (re_opcode_t) *p2 == endline))
-	      {
-		register unsigned char c
-                  = *p2 == (unsigned char) endline ? '\n' : p2[2];
-
-                if ((re_opcode_t) p1[3] == exactn && p1[5] != c)
-                  {
-  		    p[-3] = (unsigned char) pop_failure_jump;
-                    DEBUG_PRINT3 ("  %c != %c => pop_failure_jump.\n",
-                                  c, p1[5]);
-                  }
-                  
-		else if ((re_opcode_t) p1[3] == charset
-			 || (re_opcode_t) p1[3] == charset_not)
-		  {
-		    int not = (re_opcode_t) p1[3] == charset_not;
-                    
-		    if (c < (unsigned char) (p1[4] * BYTEWIDTH)
-			&& p1[5 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
-		      not = !not;
-
-                    /* `not' is equal to 1 if c would match, which means
-                        that we can't change to pop_failure_jump.  */
-		    if (!not)
-                      {
-  		        p[-3] = (unsigned char) pop_failure_jump;
-                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
-                      }
-		  }
-	      }
-            else if ((re_opcode_t) *p2 == charset)
-	      {
-#ifdef DEBUG
-		register unsigned char c
-                  = *p2 == (unsigned char) endline ? '\n' : p2[2];
-#endif
-
-                if ((re_opcode_t) p1[3] == exactn
-		    && ! ((int) p2[1] * BYTEWIDTH > (int) p1[4]
-			  && (p2[1 + p1[4] / BYTEWIDTH]
-			      & (1 << (p1[4] % BYTEWIDTH)))))
-                  {
-  		    p[-3] = (unsigned char) pop_failure_jump;
-                    DEBUG_PRINT3 ("  %c != %c => pop_failure_jump.\n",
-                                  c, p1[5]);
-                  }
-                  
-		else if ((re_opcode_t) p1[3] == charset_not)
-		  {
-		    int idx;
-		    /* We win if the charset_not inside the loop
-		       lists every character listed in the charset after.  */
-		    for (idx = 0; idx < (int) p2[1]; idx++)
-		      if (! (p2[2 + idx] == 0
-			     || (idx < (int) p1[4]
-				 && ((p2[2 + idx] & ~ p1[5 + idx]) == 0))))
-			break;
-
-		    if (idx == p2[1])
-                      {
-  		        p[-3] = (unsigned char) pop_failure_jump;
-                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
-                      }
-		  }
-		else if ((re_opcode_t) p1[3] == charset)
-		  {
-		    int idx;
-		    /* We win if the charset inside the loop
-		       has no overlap with the one after the loop.  */
-		    for (idx = 0;
-			 idx < (int) p2[1] && idx < (int) p1[4];
-			 idx++)
-		      if ((p2[2 + idx] & p1[5 + idx]) != 0)
-			break;
-
-		    if (idx == p2[1] || idx == p1[4])
-                      {
-  		        p[-3] = (unsigned char) pop_failure_jump;
-                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
-                      }
-		  }
-	      }
-	  }
-	  p -= 2;		/* Point at relative address again.  */
-	  if ((re_opcode_t) p[-1] != pop_failure_jump)
-	    {
-	      p[-1] = (unsigned char) jump;
-              DEBUG_PRINT1 ("  Match => jump.\n");
-	      goto unconditional_jump;
-	    }
-        /* Note fall through.  */
-
-
-	/* The end of a simple repeat has a pop_failure_jump back to
-           its matching on_failure_jump, where the latter will push a
-           failure point.  The pop_failure_jump takes off failure
-           points put on by this pop_failure_jump's matching
-           on_failure_jump; we got through the pattern to here from the
-           matching on_failure_jump, so didn't fail.  */
-        case pop_failure_jump:
-          {
-            /* We need to pass separate storage for the lowest and
-               highest registers, even though we don't care about the
-               actual values.  Otherwise, we will restore only one
-               register from the stack, since lowest will == highest in
-               `pop_failure_point'.  */
-            unsigned dummy_low_reg, dummy_high_reg;
-            unsigned char *pdummy;
-            const char *sdummy;
-
-            DEBUG_PRINT1 ("EXECUTING pop_failure_jump.\n");
-            POP_FAILURE_POINT (sdummy, pdummy,
-                               dummy_low_reg, dummy_high_reg,
-                               reg_dummy, reg_dummy, reg_info_dummy);
-          }
-          /* Note fall through.  */
-
-          
-        /* Unconditionally jump (without popping any failure points).  */
-        case jump:
-	unconditional_jump:
-	  EXTRACT_NUMBER_AND_INCR (mcnt, p);	/* Get the amount to jump.  */
-          DEBUG_PRINT2 ("EXECUTING jump %d ", mcnt);
-	  p += mcnt;				/* Do the jump.  */
-          DEBUG_PRINT2 ("(to 0x%x).\n", p);
-	  break;
-
-	
-        /* We need this opcode so we can detect where alternatives end
-           in `group_match_null_string_p' et al.  */
-        case jump_past_alt:
-          DEBUG_PRINT1 ("EXECUTING jump_past_alt.\n");
-          goto unconditional_jump;
-
-
-        /* Normally, the on_failure_jump pushes a failure point, which
-           then gets popped at pop_failure_jump.  We will end up at
-           pop_failure_jump, also, and with a pattern of, say, `a+', we
-           are skipping over the on_failure_jump, so we have to push
-           something meaningless for pop_failure_jump to pop.  */
-        case dummy_failure_jump:
-          DEBUG_PRINT1 ("EXECUTING dummy_failure_jump.\n");
-          /* It doesn't matter what we push for the string here.  What
-             the code at `fail' tests is the value for the pattern.  */
-          PUSH_FAILURE_POINT (0, 0, -2);
-          goto unconditional_jump;
-
-
-        /* At the end of an alternative, we need to push a dummy failure
-           point in case we are followed by a `pop_failure_jump', because
-           we don't want the failure point for the alternative to be
-           popped.  For example, matching `(a|ab)*' against `aab'
-           requires that we match the `ab' alternative.  */
-        case push_dummy_failure:
-          DEBUG_PRINT1 ("EXECUTING push_dummy_failure.\n");
-          /* See comments just above at `dummy_failure_jump' about the
-             two zeroes.  */
-          PUSH_FAILURE_POINT (0, 0, -2);
-          break;
-
-        /* Have to succeed matching what follows at least n times.
-           After that, handle like `on_failure_jump'.  */
-        case succeed_n: 
-          EXTRACT_NUMBER (mcnt, p + 2);
-          DEBUG_PRINT2 ("EXECUTING succeed_n %d.\n", mcnt);
-
-          assert (mcnt >= 0);
-          /* Originally, this is how many times we HAVE to succeed.  */
-          if (mcnt > 0)
-            {
-               mcnt--;
-	       p += 2;
-               STORE_NUMBER_AND_INCR (p, mcnt);
-               DEBUG_PRINT3 ("  Setting 0x%x to %d.\n", p, mcnt);
-            }
-	  else if (mcnt == 0)
-            {
-              DEBUG_PRINT2 ("  Setting two bytes from 0x%x to no_op.\n", p+2);
-	      p[2] = (unsigned char) no_op;
-              p[3] = (unsigned char) no_op;
-              goto on_failure;
-            }
-          break;
-        
-        case jump_n: 
-          EXTRACT_NUMBER (mcnt, p + 2);
-          DEBUG_PRINT2 ("EXECUTING jump_n %d.\n", mcnt);
-
-          /* Originally, this is how many times we CAN jump.  */
-          if (mcnt)
-            {
-               mcnt--;
-               STORE_NUMBER (p + 2, mcnt);
-	       goto unconditional_jump;	     
-            }
-          /* If don't have to jump any more, skip over the rest of command.  */
-	  else      
-	    p += 4;		     
-          break;
-        
-	case set_number_at:
-	  {
-            DEBUG_PRINT1 ("EXECUTING set_number_at.\n");
-
-            EXTRACT_NUMBER_AND_INCR (mcnt, p);
-            p1 = p + mcnt;
-            EXTRACT_NUMBER_AND_INCR (mcnt, p);
-            DEBUG_PRINT3 ("  Setting 0x%x to %d.\n", p1, mcnt);
-	    STORE_NUMBER (p1, mcnt);
-            break;
-          }
-
-        case wordbound:
-          DEBUG_PRINT1 ("EXECUTING wordbound.\n");
-          if (AT_WORD_BOUNDARY (d))
-	    break;
-          goto fail;
-
-	case notwordbound:
-          DEBUG_PRINT1 ("EXECUTING notwordbound.\n");
-	  if (AT_WORD_BOUNDARY (d))
-	    goto fail;
-          break;
-
-	case wordbeg:
-          DEBUG_PRINT1 ("EXECUTING wordbeg.\n");
-	  if (WORDCHAR_P (d) && (AT_STRINGS_BEG (d) || !WORDCHAR_P (d - 1)))
-	    break;
-          goto fail;
-
-	case wordend:
-          DEBUG_PRINT1 ("EXECUTING wordend.\n");
-	  if (!AT_STRINGS_BEG (d) && WORDCHAR_P (d - 1)
-              && (!WORDCHAR_P (d) || AT_STRINGS_END (d)))
-	    break;
-          goto fail;
-
-#ifdef emacs
-  	case before_dot:
-          DEBUG_PRINT1 ("EXECUTING before_dot.\n");
- 	  if (PTR_CHAR_POS ((unsigned char *) d) >= point)
-  	    goto fail;
-  	  break;
-  
-  	case at_dot:
-          DEBUG_PRINT1 ("EXECUTING at_dot.\n");
- 	  if (PTR_CHAR_POS ((unsigned char *) d) != point)
-  	    goto fail;
-  	  break;
-  
-  	case after_dot:
-          DEBUG_PRINT1 ("EXECUTING after_dot.\n");
-          if (PTR_CHAR_POS ((unsigned char *) d) <= point)
-  	    goto fail;
-  	  break;
-#if 0 /* not emacs19 */
-	case at_dot:
-          DEBUG_PRINT1 ("EXECUTING at_dot.\n");
-	  if (PTR_CHAR_POS ((unsigned char *) d) + 1 != point)
-	    goto fail;
-	  break;
-#endif /* not emacs19 */
-
-	case syntaxspec:
-          DEBUG_PRINT2 ("EXECUTING syntaxspec %d.\n", mcnt);
-	  mcnt = *p++;
-	  goto matchsyntax;
-
-        case wordchar:
-          DEBUG_PRINT1 ("EXECUTING Emacs wordchar.\n");
-	  mcnt = (int) Sword;
-        matchsyntax:
-	  PREFETCH ();
-	  /* Can't use *d++ here; SYNTAX may be an unsafe macro.  */
-	  d++;
-	  if (SYNTAX (d[-1]) != (enum syntaxcode) mcnt)
-	    goto fail;
-          SET_REGS_MATCHED ();
-	  break;
-
-	case notsyntaxspec:
-          DEBUG_PRINT2 ("EXECUTING notsyntaxspec %d.\n", mcnt);
-	  mcnt = *p++;
-	  goto matchnotsyntax;
-
-        case notwordchar:
-          DEBUG_PRINT1 ("EXECUTING Emacs notwordchar.\n");
-	  mcnt = (int) Sword;
-        matchnotsyntax:
-	  PREFETCH ();
-	  /* Can't use *d++ here; SYNTAX may be an unsafe macro.  */
-	  d++;
-	  if (SYNTAX (d[-1]) == (enum syntaxcode) mcnt)
-	    goto fail;
-	  SET_REGS_MATCHED ();
-          break;
-
-#else /* not emacs */
-	case wordchar:
-          DEBUG_PRINT1 ("EXECUTING non-Emacs wordchar.\n");
-	  PREFETCH ();
-          if (!WORDCHAR_P (d))
-            goto fail;
-	  SET_REGS_MATCHED ();
-          d++;
-	  break;
-	  
-	case notwordchar:
-          DEBUG_PRINT1 ("EXECUTING non-Emacs notwordchar.\n");
-	  PREFETCH ();
-	  if (WORDCHAR_P (d))
-            goto fail;
-          SET_REGS_MATCHED ();
-          d++;
-	  break;
-#endif /* not emacs */
-          
-        default:
-          abort ();
-	}
-      continue;  /* Successfully executed one pattern command; keep going.  */
-
-
-    /* We goto here if a matching operation fails. */
-    fail:
-      if (!FAIL_STACK_EMPTY ())
-	{ /* A restart point is known.  Restore to that state.  */
-          DEBUG_PRINT1 ("\nFAIL:\n");
-          POP_FAILURE_POINT (d, p,
-                             lowest_active_reg, highest_active_reg,
-                             regstart, regend, reg_info);
-
-          /* If this failure point is a dummy, try the next one.  */
-          if (!p)
-	    goto fail;
-
-          /* If we failed to the end of the pattern, don't examine *p.  */
-	  assert (p <= pend);
-          if (p < pend)
-            {
-              boolean is_a_jump_n = false;
-              
-              /* If failed to a backwards jump that's part of a repetition
-                 loop, need to pop this failure point and use the next one.  */
-              switch ((re_opcode_t) *p)
-                {
-                case jump_n:
-                  is_a_jump_n = true;
-                case maybe_pop_jump:
-                case pop_failure_jump:
-                case jump:
-                  p1 = p + 1;
-                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-                  p1 += mcnt;	
-
-                  if ((is_a_jump_n && (re_opcode_t) *p1 == succeed_n)
-                      || (!is_a_jump_n
-                          && (re_opcode_t) *p1 == on_failure_jump))
-                    goto fail;
-                  break;
-                default:
-                  /* do nothing */ ;
-                }
-            }
-
-          if (d >= string1 && d <= end1)
-	    dend = end_match_1;
-        }
-      else
-        break;   /* Matching at this starting point really fails.  */
-    } /* for (;;) */
-
-  if (best_regs_set)
-    goto restore_best_regs;
-
-  FREE_VARIABLES ();
-
-  return -1;         			/* Failure to match.  */
-} /* re_match_2 */
-
-/* Subroutine definitions for re_match_2.  */
-
-
-/* We are passed P pointing to a register number after a start_memory.
-   
-   Return true if the pattern up to the corresponding stop_memory can
-   match the empty string, and false otherwise.
-   
-   If we find the matching stop_memory, sets P to point to one past its number.
-   Otherwise, sets P to an undefined byte less than or equal to END.
-
-   We don't handle duplicates properly (yet).  */
-
-static boolean
-group_match_null_string_p (p, end, reg_info)
-    unsigned char **p, *end;
-    register_info_type *reg_info;
-{
-  int mcnt;
-  /* Point to after the args to the start_memory.  */
-  unsigned char *p1 = *p + 2;
-  
-  while (p1 < end)
-    {
-      /* Skip over opcodes that can match nothing, and return true or
-	 false, as appropriate, when we get to one that can't, or to the
-         matching stop_memory.  */
-      
-      switch ((re_opcode_t) *p1)
-        {
-        /* Could be either a loop or a series of alternatives.  */
-        case on_failure_jump:
-          p1++;
-          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-          
-          /* If the next operation is not a jump backwards in the
-	     pattern.  */
-
-	  if (mcnt >= 0)
-	    {
-              /* Go through the on_failure_jumps of the alternatives,
-                 seeing if any of the alternatives cannot match nothing.
-                 The last alternative starts with only a jump,
-                 whereas the rest start with on_failure_jump and end
-                 with a jump, e.g., here is the pattern for `a|b|c':
-
-                 /on_failure_jump/0/6/exactn/1/a/jump_past_alt/0/6
-                 /on_failure_jump/0/6/exactn/1/b/jump_past_alt/0/3
-                 /exactn/1/c						
-
-                 So, we have to first go through the first (n-1)
-                 alternatives and then deal with the last one separately.  */
-
-
-              /* Deal with the first (n-1) alternatives, which start
-                 with an on_failure_jump (see above) that jumps to right
-                 past a jump_past_alt.  */
-
-              while ((re_opcode_t) p1[mcnt-3] == jump_past_alt)
-                {
-                  /* `mcnt' holds how many bytes long the alternative
-                     is, including the ending `jump_past_alt' and
-                     its number.  */
-
-                  if (!alt_match_null_string_p (p1, p1 + mcnt - 3, 
-				                      reg_info))
-                    return false;
-
-                  /* Move to right after this alternative, including the
-		     jump_past_alt.  */
-                  p1 += mcnt;	
-
-                  /* Break if it's the beginning of an n-th alternative
-                     that doesn't begin with an on_failure_jump.  */
-                  if ((re_opcode_t) *p1 != on_failure_jump)
-                    break;
-		
-		  /* Still have to check that it's not an n-th
-		     alternative that starts with an on_failure_jump.  */
-		  p1++;
-                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-                  if ((re_opcode_t) p1[mcnt-3] != jump_past_alt)
-                    {
-		      /* Get to the beginning of the n-th alternative.  */
-                      p1 -= 3;
-                      break;
-                    }
-                }
-
-              /* Deal with the last alternative: go back and get number
-                 of the `jump_past_alt' just before it.  `mcnt' contains
-                 the length of the alternative.  */
-              EXTRACT_NUMBER (mcnt, p1 - 2);
-
-              if (!alt_match_null_string_p (p1, p1 + mcnt, reg_info))
-                return false;
-
-              p1 += mcnt;	/* Get past the n-th alternative.  */
-            } /* if mcnt > 0 */
-          break;
-
-          
-        case stop_memory:
-	  assert (p1[1] == **p);
-          *p = p1 + 2;
-          return true;
-
-        
-        default: 
-          if (!common_op_match_null_string_p (&p1, end, reg_info))
-            return false;
-        }
-    } /* while p1 < end */
-
-  return false;
-} /* group_match_null_string_p */
-
-
-/* Similar to group_match_null_string_p, but doesn't deal with alternatives:
-   It expects P to be the first byte of a single alternative and END one
-   byte past the last. The alternative can contain groups.  */
-   
-static boolean
-alt_match_null_string_p (p, end, reg_info)
-    unsigned char *p, *end;
-    register_info_type *reg_info;
-{
-  int mcnt;
-  unsigned char *p1 = p;
-  
-  while (p1 < end)
-    {
-      /* Skip over opcodes that can match nothing, and break when we get 
-         to one that can't.  */
-      
-      switch ((re_opcode_t) *p1)
-        {
-	/* It's a loop.  */
-        case on_failure_jump:
-          p1++;
-          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-          p1 += mcnt;
-          break;
-          
-	default: 
-          if (!common_op_match_null_string_p (&p1, end, reg_info))
-            return false;
-        }
-    }  /* while p1 < end */
-
-  return true;
-} /* alt_match_null_string_p */
-
-
-/* Deals with the ops common to group_match_null_string_p and
-   alt_match_null_string_p.  
-   
-   Sets P to one after the op and its arguments, if any.  */
-
-static boolean
-common_op_match_null_string_p (p, end, reg_info)
-    unsigned char **p, *end;
-    register_info_type *reg_info;
-{
-  int mcnt;
-  boolean ret;
-  int reg_no;
-  unsigned char *p1 = *p;
-
-  switch ((re_opcode_t) *p1++)
-    {
-    case no_op:
-    case begline:
-    case endline:
-    case begbuf:
-    case endbuf:
-    case wordbeg:
-    case wordend:
-    case wordbound:
-    case notwordbound:
-#ifdef emacs
-    case before_dot:
-    case at_dot:
-    case after_dot:
-#endif
-      break;
-
-    case start_memory:
-      reg_no = *p1;
-      assert (reg_no > 0 && reg_no <= MAX_REGNUM);
-      ret = group_match_null_string_p (&p1, end, reg_info);
-      
-      /* Have to set this here in case we're checking a group which
-         contains a group and a back reference to it.  */
-
-      if (REG_MATCH_NULL_STRING_P (reg_info[reg_no]) == MATCH_NULL_UNSET_VALUE)
-        REG_MATCH_NULL_STRING_P (reg_info[reg_no]) = ret;
-
-      if (!ret)
-        return false;
-      break;
-          
-    /* If this is an optimized succeed_n for zero times, make the jump.  */
-    case jump:
-      EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-      if (mcnt >= 0)
-        p1 += mcnt;
-      else
-        return false;
-      break;
-
-    case succeed_n:
-      /* Get to the number of times to succeed.  */
-      p1 += 2;		
-      EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-
-      if (mcnt == 0)
-        {
-          p1 -= 4;
-          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
-          p1 += mcnt;
-        }
-      else
-        return false;
-      break;
-
-    case duplicate: 
-      if (!REG_MATCH_NULL_STRING_P (reg_info[*p1]))
-        return false;
-      break;
-
-    case set_number_at:
-      p1 += 4;
-
-    default:
-      /* All other opcodes mean we cannot match the empty string.  */
-      return false;
-  }
-
-  *p = p1;
-  return true;
-} /* common_op_match_null_string_p */
-
-
-/* Return zero if TRANSLATE[S1] and TRANSLATE[S2] are identical for LEN
-   bytes; nonzero otherwise.  */
-   
-static int
-bcmp_translate (s1, s2, len, translate)
-     unsigned char *s1, *s2;
-     register int len;
-     char *translate;
-{
-  register unsigned char *p1 = s1, *p2 = s2;
-  while (len)
-    {
-      if (translate[*p1++] != translate[*p2++]) return 1;
-      len--;
-    }
-  return 0;
-}
-
-/* Entry points for GNU code.  */
-
-/* re_compile_pattern is the GNU regular expression compiler: it
-   compiles PATTERN (of length SIZE) and puts the result in BUFP.
-   Returns 0 if the pattern was valid, otherwise an error string.
-   
-   Assumes the `allocated' (and perhaps `buffer') and `translate' fields
-   are set in BUFP on entry.
-   
-   We call regex_compile to do the actual compilation.  */
-
-const char *
-re_compile_pattern (pattern, length, bufp)
-     const char *pattern;
-     int length;
-     struct re_pattern_buffer *bufp;
-{
-  reg_errcode_t ret;
-  
-  /* GNU code is written to assume at least RE_NREGS registers will be set
-     (and at least one extra will be -1).  */
-  bufp->regs_allocated = REGS_UNALLOCATED;
-  
-  /* And GNU code determines whether or not to get register information
-     by passing null for the REGS argument to re_match, etc., not by
-     setting no_sub.  */
-  bufp->no_sub = 0;
-  
-  /* Match anchors at newline.  */
-  bufp->newline_anchor = 1;
-  
-  ret = regex_compile (pattern, length, re_syntax_options, bufp);
-
-  if (!ret)
-    return NULL;
-  return gettext (re_error_msgid[(int) ret]);
-}     
-
-/* Entry points compatible with 4.2 BSD regex library.  We don't define
-   them unless specifically requested.  */
-
-#ifdef _REGEX_RE_COMP
-
-/* BSD has one and only one pattern buffer.  */
-static struct re_pattern_buffer re_comp_buf;
-
-char *
-re_comp (s)
-    const char *s;
-{
-  reg_errcode_t ret;
-  
-  if (!s)
-    {
-      if (!re_comp_buf.buffer)
-	return gettext ("No previous regular expression");
-      return 0;
-    }
-
-  if (!re_comp_buf.buffer)
-    {
-      re_comp_buf.buffer = (unsigned char *) malloc (200);
-      if (re_comp_buf.buffer == NULL)
-        return gettext (re_error_msgid[(int) REG_ESPACE]);
-      re_comp_buf.allocated = 200;
-
-      re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH);
-      if (re_comp_buf.fastmap == NULL)
-	return gettext (re_error_msgid[(int) REG_ESPACE]);
-    }
-
-  /* Since `re_exec' always passes NULL for the `regs' argument, we
-     don't need to initialize the pattern buffer fields which affect it.  */
-
-  /* Match anchors at newlines.  */
-  re_comp_buf.newline_anchor = 1;
-
-  ret = regex_compile (s, strlen (s), re_syntax_options, &re_comp_buf);
-  
-  if (!ret)
-    return NULL;
-
-  /* Yes, we're discarding `const' here if !HAVE_LIBINTL.  */
-  return (char *) gettext (re_error_msgid[(int) ret]);
-}
-
-
-int
-re_exec (s)
-    const char *s;
-{
-  const int len = strlen (s);
-  return
-    0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0);
-}
-#endif /* _REGEX_RE_COMP */
-
-/* POSIX.2 functions.  Don't define these for Emacs.  */
-
-#ifndef emacs
-
-/* regcomp takes a regular expression as a string and compiles it.
-
-   PREG is a regex_t *.  We do not expect any fields to be initialized,
-   since POSIX says we shouldn't.  Thus, we set
-
-     `buffer' to the compiled pattern;
-     `used' to the length of the compiled pattern;
-     `syntax' to RE_SYNTAX_POSIX_EXTENDED if the
-       REG_EXTENDED bit in CFLAGS is set; otherwise, to
-       RE_SYNTAX_POSIX_BASIC;
-     `newline_anchor' to REG_NEWLINE being set in CFLAGS;
-     `fastmap' and `fastmap_accurate' to zero;
-     `re_nsub' to the number of subexpressions in PATTERN.
-
-   PATTERN is the address of the pattern string.
-
-   CFLAGS is a series of bits which affect compilation.
-
-     If REG_EXTENDED is set, we use POSIX extended syntax; otherwise, we
-     use POSIX basic syntax.
-
-     If REG_NEWLINE is set, then . and [^...] don't match newline.
-     Also, regexec will try a match beginning after every newline.
-
-     If REG_ICASE is set, then we considers upper- and lowercase
-     versions of letters to be equivalent when matching.
-
-     If REG_NOSUB is set, then when PREG is passed to regexec, that
-     routine will report only success or failure, and nothing about the
-     registers.
-
-   It returns 0 if it succeeds, nonzero if it doesn't.  (See regex.h for
-   the return codes and their meanings.)  */
-
-int
-regcomp (preg, pattern, cflags)
-    regex_t *preg;
-    const char *pattern; 
-    int cflags;
-{
-  reg_errcode_t ret;
-  unsigned syntax
-    = (cflags & REG_EXTENDED) ?
-      RE_SYNTAX_POSIX_EXTENDED : RE_SYNTAX_POSIX_BASIC;
-
-  /* regex_compile will allocate the space for the compiled pattern.  */
-  preg->buffer = 0;
-  preg->allocated = 0;
-  preg->used = 0;
-  
-  /* Don't bother to use a fastmap when searching.  This simplifies the
-     REG_NEWLINE case: if we used a fastmap, we'd have to put all the
-     characters after newlines into the fastmap.  This way, we just try
-     every character.  */
-  preg->fastmap = 0;
-  
-  if (cflags & REG_ICASE)
-    {
-      unsigned i;
-      
-      preg->translate = (char *) malloc (CHAR_SET_SIZE);
-      if (preg->translate == NULL)
-        return (int) REG_ESPACE;
-
-      /* Map uppercase characters to corresponding lowercase ones.  */
-      for (i = 0; i < CHAR_SET_SIZE; i++)
-        preg->translate[i] = ISUPPER (i) ? tolower (i) : i;
-    }
-  else
-    preg->translate = NULL;
-
-  /* If REG_NEWLINE is set, newlines are treated differently.  */
-  if (cflags & REG_NEWLINE)
-    { /* REG_NEWLINE implies neither . nor [^...] match newline.  */
-      syntax &= ~RE_DOT_NEWLINE;
-      syntax |= RE_HAT_LISTS_NOT_NEWLINE;
-      /* It also changes the matching behavior.  */
-      preg->newline_anchor = 1;
-    }
-  else
-    preg->newline_anchor = 0;
-
-  preg->no_sub = !!(cflags & REG_NOSUB);
-
-  /* POSIX says a null character in the pattern terminates it, so we 
-     can use strlen here in compiling the pattern.  */
-  ret = regex_compile (pattern, strlen (pattern), syntax, preg);
-  
-  /* POSIX doesn't distinguish between an unmatched open-group and an
-     unmatched close-group: both are REG_EPAREN.  */
-  if (ret == REG_ERPAREN) ret = REG_EPAREN;
-  
-  return (int) ret;
-}
-
-
-/* regexec searches for a given pattern, specified by PREG, in the
-   string STRING.
-   
-   If NMATCH is zero or REG_NOSUB was set in the cflags argument to
-   `regcomp', we ignore PMATCH.  Otherwise, we assume PMATCH has at
-   least NMATCH elements, and we set them to the offsets of the
-   corresponding matched substrings.
-   
-   EFLAGS specifies `execution flags' which affect matching: if
-   REG_NOTBOL is set, then ^ does not match at the beginning of the
-   string; if REG_NOTEOL is set, then $ does not match at the end.
-   
-   We return 0 if we find a match and REG_NOMATCH if not.  */
-
-int
-regexec (preg, string, nmatch, pmatch, eflags)
-    const regex_t *preg;
-    const char *string; 
-    size_t nmatch; 
-    regmatch_t pmatch[]; 
-    int eflags;
-{
-  int ret;
-  struct re_registers regs;
-  regex_t private_preg;
-  int len = strlen (string);
-  boolean want_reg_info = !preg->no_sub && nmatch > 0;
-
-  private_preg = *preg;
-  
-  private_preg.not_bol = !!(eflags & REG_NOTBOL);
-  private_preg.not_eol = !!(eflags & REG_NOTEOL);
-  
-  /* The user has told us exactly how many registers to return
-     information about, via `nmatch'.  We have to pass that on to the
-     matching routines.  */
-  private_preg.regs_allocated = REGS_FIXED;
-  
-  if (want_reg_info)
-    {
-      regs.num_regs = nmatch;
-      regs.start = TALLOC (nmatch, regoff_t);
-      regs.end = TALLOC (nmatch, regoff_t);
-      if (regs.start == NULL || regs.end == NULL)
-        return (int) REG_NOMATCH;
-    }
-
-  /* Perform the searching operation.  */
-  ret = re_search (&private_preg, string, len,
-                   /* start: */ 0, /* range: */ len,
-                   want_reg_info ? &regs : (struct re_registers *) 0);
-  
-  /* Copy the register information to the POSIX structure.  */
-  if (want_reg_info)
-    {
-      if (ret >= 0)
-        {
-          unsigned r;
-
-          for (r = 0; r < nmatch; r++)
-            {
-              pmatch[r].rm_so = regs.start[r];
-              pmatch[r].rm_eo = regs.end[r];
-            }
-        }
-
-      /* If we needed the temporary register info, free the space now.  */
-      free (regs.start);
-      free (regs.end);
-    }
-
-  /* We want zero return to mean success, unlike `re_search'.  */
-  return ret >= 0 ? (int) REG_NOERROR : (int) REG_NOMATCH;
-}
-
-
-/* Returns a message corresponding to an error code, ERRCODE, returned
-   from either regcomp or regexec.   We don't use PREG here.  */
-
-size_t
-regerror (errcode, preg, errbuf, errbuf_size)
-    int errcode;
-    const regex_t *preg;
-    char *errbuf;
-    size_t errbuf_size;
-{
-  const char *msg;
-  size_t msg_size;
-
-  if (errcode < 0
-      || errcode >= (sizeof (re_error_msgid) / sizeof (re_error_msgid[0])))
-    /* Only error codes returned by the rest of the code should be passed 
-       to this routine.  If we are given anything else, or if other regex
-       code generates an invalid error code, then the program has a bug.
-       Dump core so we can fix it.  */
-    abort ();
-
-  msg = gettext (re_error_msgid[errcode]);
-
-  msg_size = strlen (msg) + 1; /* Includes the null.  */
-  
-  if (errbuf_size != 0)
-    {
-      if (msg_size > errbuf_size)
-        {
-          strncpy (errbuf, msg, errbuf_size - 1);
-          errbuf[errbuf_size - 1] = 0;
-        }
-      else
-        strcpy (errbuf, msg);
-    }
-
-  return msg_size;
-}
-
-
-/* Free dynamically allocated space used by PREG.  */
-
-void
-regfree (preg)
-    regex_t *preg;
-{
-  if (preg->buffer != NULL)
-    free (preg->buffer);
-  preg->buffer = NULL;
-  
-  preg->allocated = 0;
-  preg->used = 0;
-
-  if (preg->fastmap != NULL)
-    free (preg->fastmap);
-  preg->fastmap = NULL;
-  preg->fastmap_accurate = 0;
-
-  if (preg->translate != NULL)
-    free (preg->translate);
-  preg->translate = NULL;
-}
-
-#endif /* not emacs  */
-
-/*
-Local variables:
-make-backup-files: t
-version-control: t
-trim-versions-without-asking: nil
-End:
-*/