annotate drivers/mga_vid.c @ 31212:e682d09f5e33

Remove GPL-licensed YUV to RGB MMX routines. We now have an LGPL replacement that is at least equally fast.

/*
 * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0
 * BES == Back End Scaler
 *
 * Copyright (C) 1999 Aaron Holtzman
 *
 * Module skeleton based on gutted agpgart module by
 * Jeff Hartmann <[e-mail]>
 * YUY2 support (see config.format) added by A'rpi/ESP-team
 * double buffering added by A'rpi/ESP-team
 * brightness/contrast introduced by eyck
 * multiple card support by Attila Kinali <[e-mail]>
 *
 * This file is part of mga_vid.
 *
 * mga_vid is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * mga_vid is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with mga_vid; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

//It's entirely possible this major conflicts with something else
//use the 'major' parameter to override the default major number (178)
/* mknod /dev/mga_vid c 178 0 */

//#define CRTC2

// Set this value, if autodetection fails! (video ram size in megabytes)
// #define MGA_MEMORY_SIZE 16

//#define MGA_ALLOW_IRQ

#define MGA_VSYNC_POS 2

#include <linux/config.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/errno.h>

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10)
#include <linux/malloc.h>
#else
#include <linux/slab.h>
#endif

#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/init.h>

#include "mga_vid.h"

#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif

#ifdef CONFIG_DEVFS_FS
#include <linux/devfs_fs_kernel.h>
#endif

#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/io.h>

#define TRUE 1
#define FALSE 0

#define DEFAULT_MGA_VID_MAJOR 178

#ifndef PCI_DEVICE_ID_MATROX_G200_PCI
#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520
#endif

#ifndef PCI_DEVICE_ID_MATROX_G200_AGP
#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521
#endif

#ifndef PCI_DEVICE_ID_MATROX_G400
#define PCI_DEVICE_ID_MATROX_G400 0x0525
#endif

#ifndef PCI_DEVICE_ID_MATROX_G550
#define PCI_DEVICE_ID_MATROX_G550 0x2527
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB
#define PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB 0x2159
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM
#define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM 0x19d8
#endif

#ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM
#define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM 0x0328
#endif

MODULE_AUTHOR("Aaron Holtzman <[e-mail]>");
#ifdef MODULE_LICENSE
MODULE_LICENSE("GPL");
#endif

#define PARAM_BRIGHTNESS "brightness="
#define PARAM_CONTRAST "contrast="
#define PARAM_BLACKIE "blackie="

// set PARAM_BUFF_SIZE to just below 4k because some kernel versions
// store additional information in the memory page which leads to
// the allocation of an additional page if exactly 4k is used
#define PARAM_BUFF_SIZE 4000

#ifndef min
#define min(x,y) (((x)<(y))?(x):(y))
#endif

#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0)
#include <linux/ctype.h>

static unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base)
{
    unsigned long result = 0,value;

    if (!base) {
        base = 10;
        if (*cp == '0') {
            base = 8;
            cp++;
            if ((*cp == 'x') && isxdigit(cp[1])) {
                cp++;
                base = 16;
            }
        }
    }
    while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
                                                               ? toupper(*cp) : *cp)-'A'+10) < base) {
        result = result*base + value;
        cp++;
    }
    if (endp)
        *endp = (char *)cp;
    return result;
}

static long simple_strtol(const char *cp,char **endp,unsigned int base)
{
    if(*cp=='-')
        return -simple_strtoul(cp+1,endp,base);
    return simple_strtoul(cp,endp,base);
}
#endif


typedef struct bes_registers_s
{
    //BES Control
    uint32_t besctl;
    //BES Global control
    uint32_t besglobctl;
    //Luma control (brightness and contrast)
    uint32_t beslumactl;
    //Line pitch
    uint32_t bespitch;

    //Buffer A-1 Chroma 3 plane org
    uint32_t besa1c3org;
    //Buffer A-1 Chroma org
    uint32_t besa1corg;
    //Buffer A-1 Luma org
    uint32_t besa1org;

    //Buffer A-2 Chroma 3 plane org
    uint32_t besa2c3org;
    //Buffer A-2 Chroma org
    uint32_t besa2corg;
    //Buffer A-2 Luma org
    uint32_t besa2org;

    //Buffer B-1 Chroma 3 plane org
    uint32_t besb1c3org;
    //Buffer B-1 Chroma org
    uint32_t besb1corg;
    //Buffer B-1 Luma org
    uint32_t besb1org;

    //Buffer B-2 Chroma 3 plane org
    uint32_t besb2c3org;
    //Buffer B-2 Chroma org
    uint32_t besb2corg;
    //Buffer B-2 Luma org
    uint32_t besb2org;

    //BES Horizontal coord
    uint32_t beshcoord;
    //BES Horizontal inverse scaling [5.14]
    uint32_t beshiscal;
    //BES Horizontal source start [10.14] (for scaling)
    uint32_t beshsrcst;
    //BES Horizontal source ending [10.14] (for scaling)
    uint32_t beshsrcend;
    //BES Horizontal source last
    uint32_t beshsrclst;


    //BES Vertical coord
    uint32_t besvcoord;
    //BES Vertical inverse scaling [5.14]
    uint32_t besviscal;
    //BES Field 1 vertical source last position
    uint32_t besv1srclst;
    //BES Field 1 weight start
    uint32_t besv1wght;
    //BES Field 2 vertical source last position
    uint32_t besv2srclst;
    //BES Field 2 weight start
    uint32_t besv2wght;


    //configurable stuff
    int blackie;

} bes_registers_t;

#ifdef CRTC2
typedef struct crtc2_registers_s
{
    uint32_t c2ctl;
    uint32_t c2datactl;
    uint32_t c2misc;
    uint32_t c2hparam;
    uint32_t c2hsync;
    uint32_t c2offset;
    uint32_t c2pl2startadd0;
    uint32_t c2pl2startadd1;
    uint32_t c2pl3startadd0;
    uint32_t c2pl3startadd1;
    uint32_t c2preload;
    uint32_t c2spicstartadd0;
    uint32_t c2spicstartadd1;
    uint32_t c2startadd0;
    uint32_t c2startadd1;
    uint32_t c2subpiclut;
    uint32_t c2vcount;
    uint32_t c2vparam;
    uint32_t c2vsync;
} crtc2_registers_t;
#endif





//All register offsets are converted to word aligned offsets (32 bit)
//because we want all our register accesses to be 32 bits
#define VCOUNT      0x1e20

#define PALWTADD      0x3c00 // Index register for X_DATAREG port
#define X_DATAREG     0x3c0a

#define XMULCTRL      0x19
#define BPP_8         0x00
#define BPP_15        0x01
#define BPP_16        0x02
#define BPP_24        0x03
#define BPP_32_DIR    0x04
#define BPP_32_PAL    0x07

#define XCOLMSK       0x40
#define X_COLKEY      0x42
#define XKEYOPMODE    0x51
#define XCOLMSK0RED   0x52
#define XCOLMSK0GREEN 0x53
#define XCOLMSK0BLUE  0x54
#define XCOLKEY0RED   0x55
#define XCOLKEY0GREEN 0x56
#define XCOLKEY0BLUE  0x57

#ifdef CRTC2

/*CRTC2 registers*/
#define XMISCCTRL  0x1e
#define C2CTL       0x3c10
#define C2DATACTL   0x3c4c
#define C2MISC      0x3c44
#define C2HPARAM    0x3c14
#define C2HSYNC     0x3c18
#define C2OFFSET    0x3c40
#define C2PL2STARTADD0 0x3c30  // like BESA1CORG
#define C2PL2STARTADD1 0x3c34  // like BESA2CORG
#define C2PL3STARTADD0 0x3c38  // like BESA1C3ORG
#define C2PL3STARTADD1 0x3c3c  // like BESA2C3ORG
#define C2PRELOAD   0x3c24
#define C2SPICSTARTADD0 0x3c54
#define C2SPICSTARTADD1 0x3c58
#define C2STARTADD0 0x3c28  // like BESA1ORG
#define C2STARTADD1 0x3c2c  // like BESA2ORG
#define C2SUBPICLUT 0x3c50
#define C2VCOUNT    0x3c48
#define C2VPARAM    0x3c1c
#define C2VSYNC     0x3c20

#endif

// Backend Scaler registers
#define BESCTL      0x3d20
#define BESGLOBCTL  0x3dc0
#define BESLUMACTL  0x3d40
#define BESPITCH    0x3d24

#define BESA1C3ORG  0x3d60
#define BESA1CORG   0x3d10
#define BESA1ORG    0x3d00

#define BESA2C3ORG  0x3d64
#define BESA2CORG   0x3d14
#define BESA2ORG    0x3d04

#define BESB1C3ORG  0x3d68
#define BESB1CORG   0x3d18
#define BESB1ORG    0x3d08

#define BESB2C3ORG  0x3d6C
#define BESB2CORG   0x3d1C
#define BESB2ORG    0x3d0C

#define BESHCOORD   0x3d28
#define BESHISCAL   0x3d30
#define BESHSRCEND  0x3d3C
#define BESHSRCLST  0x3d50
#define BESHSRCST   0x3d38
#define BESV1WGHT   0x3d48
#define BESV2WGHT   0x3d4c
#define BESV1SRCLST 0x3d54
#define BESV2SRCLST 0x3d58
#define BESVISCAL   0x3d34
#define BESVCOORD   0x3d2c
#define BESSTATUS   0x3dc4

#define CRTCX       0x1fd4
#define CRTCD       0x1fd5
#define IEN         0x1e1c
#define ICLEAR      0x1e18
#define STATUS      0x1e14


// global devfs handle for /dev/mga_vid
#ifdef CONFIG_DEVFS_FS
static devfs_handle_t dev_handle = NULL;
#endif

// card local config
typedef struct mga_card_s {

// local devfs handle for /dev/mga_vidX
#ifdef CONFIG_DEVFS_FS
    devfs_handle_t dev_handle;
#endif

    uint8_t *param_buff; // buffer for read()
    uint32_t param_buff_size;
    uint32_t param_buff_len;
    bes_registers_t regs;
#ifdef CRTC2
    crtc2_registers_t cregs;
#endif
    uint32_t vid_in_use;
    uint32_t is_g400;
    uint32_t vid_src_ready;
    uint32_t vid_overlay_on;

    uint8_t *mmio_base;
    uint32_t mem_base;
    int src_base;   // YUV buffer position in video memory
    uint32_t ram_size;      // how much megabytes videoram we have
    uint32_t top_reserved;  // reserved space for console font (matroxfb + fastfont)

    int brightness; // initial brightness
    int contrast;   // initial contrast

    struct pci_dev *pci_dev;

    mga_vid_config_t config;
    int configured; // set to 1 when the card is configured over ioctl

    int colkey_saved;
    int colkey_on;
    unsigned char colkey_color[4];
    unsigned char colkey_mask[4];

    int irq; // = -1
    int next_frame;
} mga_card_t;

#define MGA_MAX_CARDS 16
// this is used as init value for the parameter arrays
// it should have exactly MGA_MAX_CARDS elements
#define MGA_MAX_CARDS_INIT_ARRAY {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
static unsigned int mga_cards_num=0;
static mga_card_t * mga_cards[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;

// module parameters
static int major = DEFAULT_MGA_VID_MAJOR;
static int mga_ram_size[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_brightness[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_contrast[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;
static int mga_top_reserved[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY;

MODULE_PARM(mga_ram_size, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_top_reserved, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_brightness, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(mga_contrast, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i");
MODULE_PARM(major, "i");

#ifdef CRTC2
static void crtc2_frame_sel(mga_card_t * card, int frame)
{
switch(frame) {
case 0:
    card->cregs.c2pl2startadd0=card->regs.besa1corg;
    card->cregs.c2pl3startadd0=card->regs.besa1c3org;
    card->cregs.c2startadd0=card->regs.besa1org;
    break;
case 1:
    card->cregs.c2pl2startadd0=card->regs.besa2corg;
    card->cregs.c2pl3startadd0=card->regs.besa2c3org;
    card->cregs.c2startadd0=card->regs.besa2org;
    break;
case 2:
    card->cregs.c2pl2startadd0=card->regs.besb1corg;
    card->cregs.c2pl3startadd0=card->regs.besb1c3org;
    card->cregs.c2startadd0=card->regs.besb1org;
    break;
case 3:
    card->cregs.c2pl2startadd0=card->regs.besb2corg;
    card->cregs.c2pl3startadd0=card->regs.besb2c3org;
    card->cregs.c2startadd0=card->regs.besb2org;
    break;
}
    writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0);
    writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0);
    writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0);
}
#endif

static void mga_vid_frame_sel(mga_card_t * card, int frame)
{
    if ( card->irq != -1 ) {
    card->next_frame=frame;
    } else {

    //we don't need the vcount protection as we're only hitting
    //one register (and it doesn't seem to be double buffered)
    card->regs.besctl = (card->regs.besctl & ~0x07000000) + (frame << 25);
    writel( card->regs.besctl, card->mmio_base + BESCTL );

//  writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16),
    writel( card->regs.besglobctl + (MGA_VSYNC_POS<<16),
            card->mmio_base + BESGLOBCTL);
#ifdef CRTC2
    crtc2_frame_sel(card, frame);
#endif

    }
}


static void mga_vid_write_regs(mga_card_t * card, int restore)
{
    //Make sure internal registers don't get updated until we're done
    writel( (readl(card->mmio_base + VCOUNT)-1)<<16,
            card->mmio_base + BESGLOBCTL);

    // color or coordinate keying

    if(restore && card->colkey_saved){
        // restore it
        card->colkey_saved=0;

#ifdef MP_DEBUG
        printk("mga_vid: Restoring colorkey (ON: %d  %02X:%02X:%02X)\n",
               card->colkey_on,card->colkey_color[0],card->colkey_color[1],card->colkey_color[2]);
#endif

        // Set color key registers:
        writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
        writeb( card->colkey_on, card->mmio_base + X_DATAREG);

        writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
        writeb( card->colkey_color[0], card->mmio_base + X_DATAREG);
        writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
        writeb( card->colkey_color[1], card->mmio_base + X_DATAREG);
        writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
        writeb( card->colkey_color[2], card->mmio_base + X_DATAREG);
        writeb( X_COLKEY, card->mmio_base + PALWTADD);
        writeb( card->colkey_color[3], card->mmio_base + X_DATAREG);

        writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
        writeb( card->colkey_mask[0], card->mmio_base + X_DATAREG);
        writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
        writeb( card->colkey_mask[1], card->mmio_base + X_DATAREG);
        writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
        writeb( card->colkey_mask[2], card->mmio_base + X_DATAREG);
        writeb( XCOLMSK, card->mmio_base + PALWTADD);
        writeb( card->colkey_mask[3], card->mmio_base + X_DATAREG);

    } else if(!card->colkey_saved){
        // save it
        card->colkey_saved=1;
        // Get color key registers:
        writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
        card->colkey_on=(unsigned char)readb(card->mmio_base + X_DATAREG) & 1;

        writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
        card->colkey_color[0]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
        card->colkey_color[1]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
        card->colkey_color[2]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( X_COLKEY, card->mmio_base + PALWTADD);
        card->colkey_color[3]=(unsigned char)readb(card->mmio_base + X_DATAREG);

        writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
        card->colkey_mask[0]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
        card->colkey_mask[1]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
        card->colkey_mask[2]=(unsigned char)readb(card->mmio_base + X_DATAREG);
        writeb( XCOLMSK, card->mmio_base + PALWTADD);
        card->colkey_mask[3]=(unsigned char)readb(card->mmio_base + X_DATAREG);

#ifdef MP_DEBUG
        printk("mga_vid: Saved colorkey (ON: %d  %02X:%02X:%02X)\n",
               card->colkey_on, card->colkey_color[0], card->colkey_color[1], card->colkey_color[2]);
#endif

    }

    if(!restore){
        writeb( XKEYOPMODE, card->mmio_base + PALWTADD);
        writeb( card->config.colkey_on, card->mmio_base + X_DATAREG);
        if ( card->config.colkey_on )
        {
            uint32_t r=0, g=0, b=0;

            writeb( XMULCTRL, card->mmio_base + PALWTADD);
            switch (readb (card->mmio_base + X_DATAREG))
            {
            case BPP_8:
                /* Need to look up the color index, just using color 0 for now. */
                break;

            case BPP_15:
                r = card->config.colkey_red   >> 3;
                g = card->config.colkey_green >> 3;
                b = card->config.colkey_blue  >> 3;
                break;

            case BPP_16:
                r = card->config.colkey_red   >> 3;
                g = card->config.colkey_green >> 2;
                b = card->config.colkey_blue  >> 3;
                break;

            case BPP_24:
            case BPP_32_DIR:
            case BPP_32_PAL:
                r = card->config.colkey_red;
                g = card->config.colkey_green;
                b = card->config.colkey_blue;
                break;
            }

            // Disable color keying on alpha channel
            writeb( XCOLMSK, card->mmio_base + PALWTADD);
            writeb( 0x00, card->mmio_base + X_DATAREG);
            writeb( X_COLKEY, card->mmio_base + PALWTADD);
            writeb( 0x00, card->mmio_base + X_DATAREG);


            // Set up color key registers
            writeb( XCOLKEY0RED, card->mmio_base + PALWTADD);
            writeb( r, card->mmio_base + X_DATAREG);
            writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD);
            writeb( g, card->mmio_base + X_DATAREG);
            writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD);
            writeb( b, card->mmio_base + X_DATAREG);

            // Set up color key mask registers
            writeb( XCOLMSK0RED, card->mmio_base + PALWTADD);
            writeb( 0xff, card->mmio_base + X_DATAREG);
            writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD);
            writeb( 0xff, card->mmio_base + X_DATAREG);
            writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD);
            writeb( 0xff, card->mmio_base + X_DATAREG);
        }
    }

    // Backend Scaler
    writel( card->regs.besctl,      card->mmio_base + BESCTL);
    if(card->is_g400)
        writel( card->regs.beslumactl,  card->mmio_base + BESLUMACTL);
    writel( card->regs.bespitch,    card->mmio_base + BESPITCH);

    writel( card->regs.besa1org,    card->mmio_base + BESA1ORG);
    writel( card->regs.besa1corg,   card->mmio_base + BESA1CORG);
    writel( card->regs.besa2org,    card->mmio_base + BESA2ORG);
    writel( card->regs.besa2corg,   card->mmio_base + BESA2CORG);
    writel( card->regs.besb1org,    card->mmio_base + BESB1ORG);
    writel( card->regs.besb1corg,   card->mmio_base + BESB1CORG);
    writel( card->regs.besb2org,    card->mmio_base + BESB2ORG);
    writel( card->regs.besb2corg,   card->mmio_base + BESB2CORG);
    if(card->is_g400)
    {
        writel( card->regs.besa1c3org,  card->mmio_base + BESA1C3ORG);
        writel( card->regs.besa2c3org,  card->mmio_base + BESA2C3ORG);
        writel( card->regs.besb1c3org,  card->mmio_base + BESB1C3ORG);
        writel( card->regs.besb2c3org,  card->mmio_base + BESB2C3ORG);
    }

    writel( card->regs.beshcoord,   card->mmio_base + BESHCOORD);
    writel( card->regs.beshiscal,   card->mmio_base + BESHISCAL);
    writel( card->regs.beshsrcst,   card->mmio_base + BESHSRCST);
    writel( card->regs.beshsrcend,  card->mmio_base + BESHSRCEND);
    writel( card->regs.beshsrclst,  card->mmio_base + BESHSRCLST);

    writel( card->regs.besvcoord,   card->mmio_base + BESVCOORD);
    writel( card->regs.besviscal,   card->mmio_base + BESVISCAL);

    writel( card->regs.besv1srclst, card->mmio_base + BESV1SRCLST);
    writel( card->regs.besv1wght,   card->mmio_base + BESV1WGHT);
    writel( card->regs.besv2srclst, card->mmio_base + BESV2SRCLST);
    writel( card->regs.besv2wght,   card->mmio_base + BESV2WGHT);

    //update the registers somewhere between 1 and 2 frames from now.
    writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16),
            card->mmio_base + BESGLOBCTL);

#if 0
    printk(KERN_DEBUG "mga_vid: wrote BES registers\n");
    printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n",
           readl(card->mmio_base + BESCTL));
    printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n",
           readl(card->mmio_base + BESGLOBCTL));
    printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n",
           readl(card->mmio_base + BESSTATUS));
#endif
#ifdef CRTC2
//  printk("c2ctl:0x%08x c2datactl:0x%08x\n", readl(card->mmio_base + C2CTL), readl(card->mmio_base + C2DATACTL));
//  printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC));
//  printk("c2ctl:0x%08x c2datactl:0x%08x\n", card->cregs.c2ctl, card->cregs.c2datactl);

//  writel(card->cregs.c2ctl,       card->mmio_base + C2CTL);

    writel(((readl(card->mmio_base + C2CTL) & ~0x03e00000) + (card->cregs.c2ctl & 0x03e00000)), card->mmio_base + C2CTL);
    writel(((readl(card->mmio_base + C2DATACTL) & ~0x000000ff) + (card->cregs.c2datactl & 0x000000ff)), card->mmio_base + C2DATACTL);
    // ctrc2
    // disable CRTC2 acording to specs
//  writel(card->cregs.c2ctl & 0xfffffff0, card->mmio_base + C2CTL);
 // je to treba ???
//  writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0xa2, card->mmio_base + XMISCCTRL); // MAFC - mfcsel & vdoutsel
//  writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0x92, card->mmio_base + XMISCCTRL);
//  writeb((readb(card->mmio_base + XMISCCTRL) & ~0xe9) + 0xa2, card->mmio_base + XMISCCTRL);
//  writel(card->cregs.c2datactl, card->mmio_base + C2DATACTL);
//  writel(card->cregs.c2hparam, card->mmio_base + C2HPARAM);
//  writel(card->cregs.c2hsync, card->mmio_base + C2HSYNC);
//  writel(card->cregs.c2vparam, card->mmio_base + C2VPARAM);
//  writel(card->cregs.c2vsync, card->mmio_base + C2VSYNC);
    writel(card->cregs.c2misc, card->mmio_base + C2MISC);

#ifdef MP_DEBUG
    printk("c2offset = %d\n",card->cregs.c2offset);
#endif

    writel(card->cregs.c2offset, card->mmio_base + C2OFFSET);
    writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0);
//  writel(card->cregs.c2startadd1, card->mmio_base + C2STARTADD1);
    writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0);
//  writel(card->cregs.c2pl2startadd1, card->mmio_base + C2PL2STARTADD1);
    writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0);
//  writel(card->cregs.c2pl3startadd1, card->mmio_base + C2PL3STARTADD1);
    writel(card->cregs.c2spicstartadd0, card->mmio_base + C2SPICSTARTADD0);
//  writel(card->cregs.c2spicstartadd1, card->mmio_base + C2SPICSTARTADD1);
//  writel(card->cregs.c2subpiclut, card->mmio_base + C2SUBPICLUT);
//  writel(card->cregs.c2preload, card->mmio_base + C2PRELOAD);
    // finaly enable everything
//  writel(card->cregs.c2ctl,       card->mmio_base + C2CTL);
//  printk("c2ctl:0x%08x c2datactl:0x%08x\n",readl(card->mmio_base + C2CTL),readl(card->mmio_base + C2DATACTL));
//  printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC));
#endif
}

static int mga_vid_set_config(mga_card_t * card)
{
    int x, y, sw, sh, dw, dh;
    int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights;
    mga_vid_config_t *config = &card->config;
    int frame_size = card->config.frame_size;

#ifdef CRTC2
#define right_margin 0
#define left_margin 18
#define hsync_len 46
#define lower_margin 10
#define vsync_len 4
#define upper_margin 39

    unsigned int hdispend = (config->src_width + 31) & ~31;
    unsigned int hsyncstart = hdispend + (right_margin & ~7);
    unsigned int hsyncend = hsyncstart + (hsync_len & ~7);
    unsigned int htotal = hsyncend + (left_margin & ~7);
    unsigned int vdispend = config->src_height;
    unsigned int vsyncstart = vdispend + lower_margin;
    unsigned int vsyncend = vsyncstart + vsync_len;
    unsigned int vtotal = vsyncend + upper_margin;
#endif
    x  = config->x_org;
    y  = config->y_org;
    sw = config->src_width;
    sh = config->src_height;
    dw = config->dest_width;
    dh = config->dest_height;

#ifdef MP_DEBUG
    printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n",
           dw, dh, x, y, sw, sh, config->format);
#endif

    if(sw<4 || sh<4 || dw<4 || dh<4){
        printk(KERN_ERR "mga_vid: Invalid src/dest dimenstions\n");
        return -1;
    }

    //FIXME check that window is valid and inside desktop

    //Setup the BES registers for a three plane 4:2:0 video source

    card->regs.besglobctl = 0;

    switch(config->format){
    case MGA_VID_FORMAT_YV12:
    case MGA_VID_FORMAT_I420:
    case MGA_VID_FORMAT_IYUV:
        card->regs.besctl = 1           // BES enabled
                            + (0<<6)    // even start polarity
                            + (1<<10)   // x filtering enabled
                            + (1<<11)   // y filtering enabled
                            + (1<<16)   // chroma upsampling
                            + (1<<17)   // 4:2:0 mode
                            + (1<<18);  // dither enabled
#if 0
        if(card->is_g400)
        {
            //zoom disabled, zoom filter disabled, 420 3 plane format, proc amp
            //disabled, rgb mode disabled
            card->regs.besglobctl = (1<<5);
        }
        else
        {
            //zoom disabled, zoom filter disabled, Cb samples in 0246, Cr
            //in 1357, BES register update on besvcnt
            card->regs.besglobctl = 0;
        }
#endif
        break;

    case MGA_VID_FORMAT_YUY2:
        card->regs.besctl = 1           // BES enabled
                            + (0<<6)    // even start polarity
                            + (1<<10)   // x filtering enabled
                            + (1<<11)   // y filtering enabled
                            + (1<<16)   // chroma upsampling
                            + (0<<17)   // 4:2:2 mode
                            + (1<<18);  // dither enabled

        card->regs.besglobctl = 0;      // YUY2 format selected
        break;

    case MGA_VID_FORMAT_UYVY:
        card->regs.besctl = 1           // BES enabled
                            + (0<<6)    // even start polarity
                            + (1<<10)   // x filtering enabled
                            + (1<<11)   // y filtering enabled
                            + (1<<16)   // chroma upsampling
                            + (0<<17)   // 4:2:2 mode
                            + (1<<18);  // dither enabled

        card->regs.besglobctl = 1<<6;        // UYVY format selected
        break;

    default:
        printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format);
        return -1;
}

    // setting black&white mode
    card->regs.besctl|=(card->regs.blackie<<20);

    //Enable contrast and brightness control
    card->regs.besglobctl |= (1<<5) + (1<<7);

    // brightness (-128..127) && contrast (0..255)
    card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF);

    //Setup destination window boundaries
    besleft = x > 0 ? x : 0;
    bestop = y > 0 ? y : 0;
    card->regs.beshcoord = (besleft<<16) + (x + dw-1);
    card->regs.besvcoord = (bestop<<16) + (y + dh-1);

    //Setup source dimensions
    card->regs.beshsrclst  = (sw - 1) << 16;
    card->regs.bespitch = (sw + 31) & ~31 ;

    //Setup horizontal scaling
    ifactor = ((sw-1)<<14)/(dw-1);
    ofsleft = besleft - x;

    card->regs.beshiscal = ifactor<<2;
    card->regs.beshsrcst = (ofsleft*ifactor)<<2;
    card->regs.beshsrcend = card->regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2);

    //Setup vertical scaling
    ifactor = ((sh-1)<<14)/(dh-1);
    ofstop = bestop - y;

    card->regs.besviscal = ifactor<<2;

    baseadrofs = ( (ofstop * card->regs.besviscal) >>16) * card->regs.bespitch;
    //frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2;
    card->regs.besa1org = (uint32_t) card->src_base + baseadrofs;
    card->regs.besa2org = (uint32_t) card->src_base + baseadrofs + 1*frame_size;
    card->regs.besb1org = (uint32_t) card->src_base + baseadrofs + 2*frame_size;
    card->regs.besb2org = (uint32_t) card->src_base + baseadrofs + 3*frame_size;

    if(config->format==MGA_VID_FORMAT_YV12
       ||config->format==MGA_VID_FORMAT_IYUV
       ||config->format==MGA_VID_FORMAT_I420
        ){
        // planar YUV frames:
        if (card->is_g400)
            baseadrofs = ( ( (ofstop * card->regs.besviscal ) / 4 ) >> 16 ) * card->regs.bespitch;
        else
            baseadrofs = ( ( ( ofstop * card->regs.besviscal ) / 2 ) >> 16 ) * card->regs.bespitch;

        if(config->format==MGA_VID_FORMAT_YV12 || !card->is_g400){
            card->regs.besa1corg = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ;
            card->regs.besa2corg = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh;
            card->regs.besb1corg = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh;
            card->regs.besb2corg = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh;
            card->regs.besa1c3org = card->regs.besa1corg + ( (card->regs.bespitch * sh) / 4);
            card->regs.besa2c3org = card->regs.besa2corg + ( (card->regs.bespitch * sh) / 4);
            card->regs.besb1c3org = card->regs.besb1corg + ( (card->regs.bespitch * sh) / 4);
            card->regs.besb2c3org = card->regs.besb2corg + ( (card->regs.bespitch * sh) / 4);
        } else {
            card->regs.besa1c3org = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ;
            card->regs.besa2c3org = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh;
            card->regs.besb1c3org = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh;
            card->regs.besb2c3org = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh;
            card->regs.besa1corg = card->regs.besa1c3org + ((card->regs.bespitch * sh) / 4);
            card->regs.besa2corg = card->regs.besa2c3org + ((card->regs.bespitch * sh) / 4);
            card->regs.besb1corg = card->regs.besb1c3org + ((card->regs.bespitch * sh) / 4);
            card->regs.besb2corg = card->regs.besb2c3org + ((card->regs.bespitch * sh) / 4);
        }
    }

    weight = ofstop * (card->regs.besviscal >> 2);
    weights = weight < 0 ? 1 : 0;
    card->regs.besv2wght = card->regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2);
    card->regs.besv2srclst = card->regs.besv1srclst = sh - 1 - (((ofstop * card->regs.besviscal) >> 16) & 0x03FF);

#ifdef CRTC2
    // pridat hlavni registry - tj. casovani ...


    switch(config->format){
    case MGA_VID_FORMAT_YV12:
    case MGA_VID_FORMAT_I420:
    case MGA_VID_FORMAT_IYUV:
        card->cregs.c2ctl = 1           // CRTC2 enabled
                            + (1<<1)    // external clock
                            + (0<<2)    // external clock
                            + (1<<3)    // pixel clock enable - not needed ???
                            + (0<<4)    // high prioryty req
                            + (1<<5)    // high prioryty req
                            + (0<<6)    // high prioryty req
                            + (1<<8)    // high prioryty req max
                            + (0<<9)    // high prioryty req max
                            + (0<<10)   // high prioryty req max
                            + (0<<20)   // CRTC1 to DAC
                            + (1<<21)   // 420 mode
                            + (1<<22)   // 420 mode
                            + (1<<23)   // 420 mode
                            + (0<<24)   // single chroma line for 420 mode - need to be corrected
                            + (0<<25)   /*/ interlace mode - need to be corrected*/
                            + (0<<26)   // field legth polariry
                            + (0<<27)   // field identification polariry
                            + (1<<28)   // VIDRST detection mode
                            + (0<<29)   // VIDRST detection mode
                            + (1<<30)   // Horizontal counter preload
                            + (1<<31)   // Vertical counter preload
                            ;
        card->cregs.c2datactl = 1       // disable dither - propably not needed, we are already in YUV mode
                            + (1<<1)    // Y filter enable
                            + (1<<2)    // CbCr filter enable
                            + (0<<3)    // subpicture enable (disabled)
                            + (0<<4)    // NTSC enable (disabled - PAL)
                            + (0<<5)    // C2 static subpicture enable (disabled)
                            + (0<<6)    // C2 subpicture offset division (disabled)
                            + (0<<7)    // 422 subformat selection !
/*                          + (0<<8)    // 15 bpp high alpha
                            + (0<<9)    // 15 bpp high alpha
                            + (0<<10)   // 15 bpp high alpha
                            + (0<<11)   // 15 bpp high alpha
                            + (0<<12)   // 15 bpp high alpha
                            + (0<<13)   // 15 bpp high alpha
                            + (0<<14)   // 15 bpp high alpha
                            + (0<<15)   // 15 bpp high alpha
                            + (0<<16)   // 15 bpp low alpha
                            + (0<<17)   // 15 bpp low alpha
                            + (0<<18)   // 15 bpp low alpha
                            + (0<<19)   // 15 bpp low alpha
                            + (0<<20)   // 15 bpp low alpha
                            + (0<<21)   // 15 bpp low alpha
                            + (0<<22)   // 15 bpp low alpha
                            + (0<<23)   // 15 bpp low alpha
                            + (0<<24)   // static subpicture key
                            + (0<<25)   // static subpicture key
                            + (0<<26)   // static subpicture key
                            + (0<<27)   // static subpicture key
                            + (0<<28)   // static subpicture key
*/                          ;
        break;

    case MGA_VID_FORMAT_YUY2:
        card->cregs.c2ctl = 1           // CRTC2 enabled
                            + (1<<1)    // external clock
                            + (0<<2)    // external clock
                            + (1<<3)    // pixel clock enable - not needed ???
                            + (0<<4)    // high prioryty req - acc to spec
                            + (1<<5)    // high prioryty req
                            + (0<<6)    // high prioryty req
                                        // 7 reserved
                            + (1<<8)    // high prioryty req max
                            + (0<<9)    // high prioryty req max
                            + (0<<10)   // high prioryty req max
                                        // 11-19 reserved
                            + (0<<20)   // CRTC1 to DAC
                            + (1<<21)   // 422 mode
                            + (0<<22)   // 422 mode
                            + (1<<23)   // 422 mode
                            + (0<<24)   // single chroma line for 420 mode - need to be corrected
                            + (0<<25)   /*/ interlace mode - need to be corrected*/
                            + (0<<26)   // field legth polariry
                            + (0<<27)   // field identification polariry
                            + (1<<28)   // VIDRST detection mode
                            + (0<<29)   // VIDRST detection mode
                            + (1<<30)   // Horizontal counter preload
                            + (1<<31)   // Vertical counter preload
                            ;
        card->cregs.c2datactl = 1       // disable dither - propably not needed, we are already in YUV mode
                            + (1<<1)    // Y filter enable
                            + (1<<2)    // CbCr filter enable
                            + (0<<3)    // subpicture enable (disabled)
                            + (0<<4)    // NTSC enable (disabled - PAL)
                            + (0<<5)    // C2 static subpicture enable (disabled)
                            + (0<<6)    // C2 subpicture offset division (disabled)
                            + (0<<7)    // 422 subformat selection !
/*                          + (0<<8)    // 15 bpp high alpha
                            + (0<<9)    // 15 bpp high alpha
                            + (0<<10)   // 15 bpp high alpha
                            + (0<<11)   // 15 bpp high alpha
                            + (0<<12)   // 15 bpp high alpha
                            + (0<<13)   // 15 bpp high alpha
                            + (0<<14)   // 15 bpp high alpha
                            + (0<<15)   // 15 bpp high alpha
                            + (0<<16)   // 15 bpp low alpha
                            + (0<<17)   // 15 bpp low alpha
                            + (0<<18)   // 15 bpp low alpha
                            + (0<<19)   // 15 bpp low alpha
                            + (0<<20)   // 15 bpp low alpha
                            + (0<<21)   // 15 bpp low alpha
                            + (0<<22)   // 15 bpp low alpha
                            + (0<<23)   // 15 bpp low alpha
                            + (0<<24)   // static subpicture key
                            + (0<<25)   // static subpicture key
                            + (0<<26)   // static subpicture key
                            + (0<<27)   // static subpicture key
                            + (0<<28)   // static subpicture key
*/                              ;
          break;

    case MGA_VID_FORMAT_UYVY:
        card->cregs.c2ctl = 1           // CRTC2 enabled
                            + (1<<1)    // external clock
                            + (0<<2)    // external clock
                            + (1<<3)    // pixel clock enable - not needed ???
                            + (0<<4)    // high prioryty req
                            + (1<<5)    // high prioryty req
                            + (0<<6)    // high prioryty req
                            + (1<<8)    // high prioryty req max
                            + (0<<9)    // high prioryty req max
                            + (0<<10)   // high prioryty req max
                            + (0<<20)   // CRTC1 to DAC
                            + (1<<21)   // 422 mode
                            + (0<<22)   // 422 mode
                            + (1<<23)   // 422 mode
                            + (1<<24)   // single chroma line for 420 mode - need to be corrected
                            + (1<<25)   /*/ interlace mode - need to be corrected*/
                            + (0<<26)   // field legth polariry
                            + (0<<27)   // field identification polariry
                            + (1<<28)   // VIDRST detection mode
                            + (0<<29)   // VIDRST detection mode
                            + (1<<30)   // Horizontal counter preload
                            + (1<<31)   // Vertical counter preload
                            ;
        card->cregs.c2datactl = 0       // enable dither - propably not needed, we are already in YUV mode
                            + (1<<1)    // Y filter enable
                            + (1<<2)    // CbCr filter enable
                            + (0<<3)    // subpicture enable (disabled)
                            + (0<<4)    // NTSC enable (disabled - PAL)
                            + (0<<5)    // C2 static subpicture enable (disabled)
                            + (0<<6)    // C2 subpicture offset division (disabled)
                            + (1<<7)    // 422 subformat selection !
/*                          + (0<<8)    // 15 bpp high alpha
                            + (0<<9)    // 15 bpp high alpha
                            + (0<<10)   // 15 bpp high alpha
                            + (0<<11)   // 15 bpp high alpha
                            + (0<<12)   // 15 bpp high alpha
                            + (0<<13)   // 15 bpp high alpha
                            + (0<<14)   // 15 bpp high alpha
                            + (0<<15)   // 15 bpp high alpha
                            + (0<<16)   // 15 bpp low alpha
                            + (0<<17)   // 15 bpp low alpha
                            + (0<<18)   // 15 bpp low alpha
                            + (0<<19)   // 15 bpp low alpha
                            + (0<<20)   // 15 bpp low alpha
                            + (0<<21)   // 15 bpp low alpha
                            + (0<<22)   // 15 bpp low alpha
                            + (0<<23)   // 15 bpp low alpha
                            + (0<<24)   // static subpicture key
                            + (0<<25)   // static subpicture key
                            + (0<<26)   // static subpicture key
                            + (0<<27)   // static subpicture key
                            + (0<<28)   // static subpicture key
*/                          ;
        break;

    default:
        printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format);
        return -1;
    }

    card->cregs.c2hparam = ( (hdispend - 8) << 16) | (htotal - 8);
    card->cregs.c2hsync = ( (hsyncend - 8) << 16) | (hsyncstart - 8);

    card->cregs.c2misc = 0        // CRTCV2 656 togg f0
                         + (0<<1) // CRTCV2 656 togg f0
                         + (0<<2) // CRTCV2 656 togg f0
                         + (0<<4) // CRTCV2 656 togg f1
                         + (0<<5) // CRTCV2 656 togg f1
                         + (0<<6) // CRTCV2 656 togg f1
                         + (0<<8) // Hsync active high
                         + (0<<9) // Vsync active high
                         // 16-27 c2vlinecomp - nevim co tam dat
                         ;
    card->cregs.c2offset=(card->regs.bespitch << 1);

    card->cregs.c2pl2startadd0=card->regs.besa1corg;
//  card->cregs.c2pl2startadd1=card->regs.besa2corg;
    card->cregs.c2pl3startadd0=card->regs.besa1c3org;
//  card->cregs.c2pl3startadd1=card->regs.besa2c3org;

    card->cregs.c2preload=(vsyncstart << 16) | (hsyncstart); // from

    card->cregs.c2spicstartadd0=0; // not used
//  card->cregs.c2spicstartadd1=0; // not used

    card->cregs.c2startadd0=card->regs.besa1org;
//  card->cregs.c2startadd1=card->regs.besa2org;

    card->cregs.c2subpiclut=0; //not used

    card->cregs.c2vparam = ( (vdispend - 1) << 16) | (vtotal - 1);
    card->cregs.c2vsync  = ( (vsyncend - 1) << 16) | (vsyncstart - 1);


#endif

    mga_vid_write_regs(card, 0);
    return 0;
}

#ifdef MGA_ALLOW_IRQ

static void enable_irq(mga_card_t * card){
    long int cc;

    cc = readl(card->mmio_base + IEN);
//  printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff));

    writeb(0x11, card->mmio_base + CRTCX);

    writeb(0x20, card->mmio_base + CRTCD);  /* clear 0, enable off */
    writeb(0x00, card->mmio_base + CRTCD);  /* enable on */
    writeb(0x10, card->mmio_base + CRTCD);  /* clear = 1 */

    writel(card->regs.besglobctl , card->mmio_base + BESGLOBCTL);
}

static void disable_irq(mga_card_t * card){
    writeb(0x11, card->mmio_base + CRTCX);
    writeb(0x20, card->mmio_base + CRTCD);  /* clear 0, enable off */
}

static void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) {
//  static int frame=0;
//  static int counter=0;
    long int cc;
    mga_card_t * card = dev_id;

//  printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT));

    //printk("mga_interrupt #%d\n", irq);

    // check whether the interrupt is really for us (irq sharing)
    if ( irq != -1 ) {
        cc = readl(card->mmio_base + STATUS);
        if ( ! (cc & 0x10) ) return;  /* vsyncpen */
//      debug_irqcnt++;
    }

//  if ( debug_irqignore ) {
//      debug_irqignore = 0;

//  frame=(frame+1)&1;
    card->regs.besctl = (card->regs.besctl & ~0x07000000) + (card->next_frame << 25);
    writel( card->regs.besctl, card->mmio_base + BESCTL );

#ifdef CRTC2
// sem pridat vyber obrazku !!!!
// i han echt kei ahnig was das obe heisse söll
    crtc2_frame_sel(card->next_frame);
#endif

#if 0
    ++counter;
    if(!(counter&63)){
        printk("mga irq counter = %d\n",counter);
    }
#endif

//  } else {
//      debug_irqignore = 1;
//  }

    if ( irq != -1 ) {
        writeb( 0x11, card->mmio_base + CRTCX);
        writeb( 0, card->mmio_base + CRTCD );
        writeb( 0x10, card->mmio_base + CRTCD );
    }

//  writel( card->regs.besglobctl, card->mmio_base + BESGLOBCTL);

    return;
}

#endif

static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
    int frame, result;
    uint32_t tmp;
    mga_card_t * card = (mga_card_t *) file->private_data;

    switch(cmd)
    {
    case MGA_VID_GET_VERSION:
        tmp = MGA_VID_VERSION;
        if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t))) {
            printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n", &tmp, (uint32_t *) arg);
            return -EFAULT;
        }
        break;

    case MGA_VID_CONFIG:
        //FIXME remove
//      printk(KERN_DEBUG "mga_vid: vcount = %d\n",readl(card->mmio_base + VCOUNT));
#ifdef MP_DEBUG
        printk(KERN_DEBUG "mga_vid: mmio_base = %p\n",card->mmio_base);
        printk(KERN_DEBUG "mga_vid: mem_base = %08x\n",card->mem_base);
        //FIXME remove

        printk(KERN_DEBUG "mga_vid: Received configuration\n");
#endif

        if(copy_from_user(&card->config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t)))
        {
            printk(KERN_ERR "mga_vid: failed copy from userspace\n");
            return -EFAULT;
        }
        if(card->config.version != MGA_VID_VERSION){
            printk(KERN_ERR "mga_vid: incompatible version! driver: %X  requested: %X\n",MGA_VID_VERSION,card->config.version);
            return -EFAULT;
        }

        if(card->config.frame_size==0 || card->config.frame_size>1024*768*2){
            printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",card->config.frame_size);
            return -EFAULT;
        }

        if(card->config.num_frames<1 || card->config.num_frames>4){
            printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",card->config.num_frames);
            return -EFAULT;
        }

        card->src_base = (card->ram_size * 0x100000 - card->config.num_frames * card->config.frame_size - card->top_reserved);
        if(card->src_base<0){
            printk(KERN_ERR "mga_vid: not enough memory for frames!\n");
            return -EFAULT;
        }
        card->src_base &= (~0xFFFF); // 64k boundary
#ifdef MP_DEBUG
        printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", card->src_base);
#endif

        if (card->is_g400)
            card->config.card_type = MGA_G400;
        else
            card->config.card_type = MGA_G200;

        card->config.ram_size = card->ram_size;

        if (copy_to_user((mga_vid_config_t *) arg, &card->config, sizeof(mga_vid_config_t)))
        {
            printk(KERN_ERR "mga_vid: failed copy to userspace\n");
            return -EFAULT;
        }

        result = mga_vid_set_config(card);
        if(!result) card->configured=1;
        return result;
        break;

    case MGA_VID_ON:
#ifdef MP_DEBUG
        printk(KERN_DEBUG "mga_vid: Video ON\n");
#endif
        card->vid_src_ready = 1;
        if(card->vid_overlay_on)
        {
            card->regs.besctl |= 1;
            mga_vid_write_regs(card, 0);
        }
#ifdef MGA_ALLOW_IRQ
        if ( card->irq != -1 ) enable_irq(card);
#endif
        card->next_frame=0;
        break;

    case MGA_VID_OFF:
#ifdef MP_DEBUG
        printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n");
#endif
        card->vid_src_ready = 0;
#ifdef MGA_ALLOW_IRQ
        if ( card->irq != -1 ) disable_irq(card);
#endif
        card->regs.besctl &= ~1;
        card->regs.besglobctl &= ~(1<<6);  // UYVY format selected
        mga_vid_write_regs(card, 0);
        break;

    case MGA_VID_FSEL:
        if(copy_from_user(&frame,(int *) arg,sizeof(int)))
        {
            printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n");
            return -EFAULT;
        }

        mga_vid_frame_sel(card, frame);
        break;

    case MGA_VID_GET_LUMA:
        //tmp = card->regs.beslumactl;
        //tmp = (tmp&0xFFFF0000) | (((tmp&0xFFFF) - 0x80)&0xFFFF);
        tmp = (card->brightness << 16) | (card->contrast&0xFFFF);

        if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t)))
        {
            printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n",
                   &tmp, (uint32_t *) arg);
            return -EFAULT;
        }
        break;

    case MGA_VID_SET_LUMA:
        tmp = arg;
        card->brightness=tmp>>16; card->contrast=tmp&0xFFFF;
        //card->regs.beslumactl = (tmp&0xFFFF0000) | ((tmp + 0x80)&0xFFFF);
        card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF);
        mga_vid_write_regs(card, 0);
        break;

    default:
        printk(KERN_ERR "mga_vid: Invalid ioctl\n");
        return -EINVAL;
    }

    return 0;
}

static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400);

// returns the number of found cards
static int mga_vid_find_card(void)
{
    struct pci_dev *dev = NULL;
    char *mga_dev_name;
    mga_card_t * card;

    while((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_ANY_ID, dev)))
    {
        mga_dev_name = "";
        mga_cards_num++;
        if(mga_cards_num == MGA_MAX_CARDS)
        {
            printk(KERN_WARNING "mga_vid: Trying to initialize more than %d cards\n",MGA_MAX_CARDS);
            mga_cards_num--;
            break;
        }

        card = kmalloc(sizeof(mga_card_t), GFP_KERNEL);
        if(!card)
        {
            printk(KERN_ERR "mga_vid: memory allocation failed\n");
            mga_cards_num--;
            break;
        }

        mga_cards[mga_cards_num - 1] = card;

        switch(dev->device) {
        case PCI_DEVICE_ID_MATROX_G550:
            mga_dev_name = "MGA G550";
            printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
            cards_init(card, dev, mga_cards_num - 1, 1);
            break;
        case PCI_DEVICE_ID_MATROX_G400:
            mga_dev_name = "MGA G400/G450";
            printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
            cards_init(card, dev, mga_cards_num - 1, 1);
            break;
        case PCI_DEVICE_ID_MATROX_G200_AGP:
            mga_dev_name = "MGA G200 AGP";
            printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
            cards_init(card, dev, mga_cards_num - 1, 0);
            break;
        case PCI_DEVICE_ID_MATROX_G200_PCI:
            mga_dev_name = "MGA G200";
            printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name);
            cards_init(card, dev, mga_cards_num - 1, 0);
            break;
        default:
            mga_cards_num--;
            printk(KERN_INFO "mga_vid: ignoring matrox device (%d) at %s [%s]\n", dev->device, dev->slot_name, dev->name);
            break;
        }
    }

    if(!mga_cards_num)
    {
        printk(KERN_ERR "mga_vid: No supported cards found\n");
    } else {
        printk(KERN_INFO "mga_vid: %d supported cards found\n", mga_cards_num);
    }

    return mga_cards_num;
}

static void mga_param_buff_fill( mga_card_t * card )
{
    unsigned len;
    unsigned size = card->param_buff_size;
    char * buf = card->param_buff;
    len = 0;
    len += snprintf(&buf[len],size-len,"Interface version: %04X\n",MGA_VID_VERSION);
    len += snprintf(&buf[len],size-len,"Memory: %x:%dM\n",card->mem_base,(unsigned int) card->ram_size);
    len += snprintf(&buf[len],size-len,"MMIO: %p\n",card->mmio_base);
    len += snprintf(&buf[len],size-len,"Configurable stuff:\n");
    len += snprintf(&buf[len],size-len,"~~~~~~~~~~~~~~~~~~~\n");
    len += snprintf(&buf[len],size-len,PARAM_BRIGHTNESS"%d\n",card->brightness);
    len += snprintf(&buf[len],size-len,PARAM_CONTRAST"%d\n",card->contrast);
    len += snprintf(&buf[len],size-len,PARAM_BLACKIE"%s\n",card->regs.blackie?"on":"off");
    card->param_buff_len = len;
    // check boundaries of mga_param_buff before writing to it!!!
}


static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
    uint32_t size;
    mga_card_t * card = (mga_card_t *) file->private_data;

    if(!card->param_buff) return -ESPIPE;
    if(!(*ppos)) mga_param_buff_fill(card);
    if(*ppos >= card->param_buff_len) return 0;
    size = min(count,card->param_buff_len-(uint32_t)(*ppos));
    memcpy(buf,card->param_buff,size);
    *ppos += size;
    return size;
}

static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
    mga_card_t * card = (mga_card_t *) file->private_data;

    if(memcmp(buf,PARAM_BRIGHTNESS,min(count,strlen(PARAM_BRIGHTNESS))) == 0)
    {
        short brightness;
        brightness=simple_strtol(&buf[strlen(PARAM_BRIGHTNESS)],NULL,10);
        if (brightness>127 || brightness<-128) { brightness=0;}
//          printk(KERN_DEBUG "mga_vid: brightness modified ( %d ) \n",brightness);
        card->brightness=brightness;
    } else
        if(memcmp(buf,PARAM_CONTRAST,min(count,strlen(PARAM_CONTRAST))) == 0)
        {
            short contrast;
            contrast=simple_strtol(&buf[strlen(PARAM_CONTRAST)],NULL,10);
            if (contrast>127 || contrast<-128) { contrast=0;}
//              printk(KERN_DEBUG "mga_vid: contrast modified ( %d ) \n",contrast);
            card->contrast=contrast;
        } else

            if(memcmp(buf,PARAM_BLACKIE,min(count,strlen(PARAM_BLACKIE))) == 0)
            {
                short blackie;
                blackie=simple_strtol(&buf[strlen(PARAM_BLACKIE)],NULL,10);
//              printk(KERN_DEBUG "mga_vid: shadow mode: ( %d ) \n",blackie);
                card->regs.blackie=(blackie>0)?1:0;
            } else count = -EIO;
    // TODO: reset settings
    return count;
}

static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma)
{
    mga_card_t * card = (mga_card_t *) file->private_data;

#ifdef MP_DEBUG
    printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n");
#endif

    if(!card->configured)
    {
        printk(KERN_ERR "mga_vid: card is not configured, cannot mmap\n");
        return -EAGAIN;
    }

    if(remap_page_range(vma->vm_start, card->mem_base + card->src_base,
                        vma->vm_end - vma->vm_start, vma->vm_page_prot))
    {
        printk(KERN_ERR "mga_vid: error mapping video memory\n");
        return -EAGAIN;
    }

    return 0;
}

static int mga_vid_release(struct inode *inode, struct file *file)
{
    mga_card_t * card;

    //Close the window just in case
#ifdef MP_DEBUG
    printk(KERN_DEBUG "mga_vid: Video OFF (release)\n");
#endif

    card = (mga_card_t *) file->private_data;

    card->vid_src_ready = 0;
    card->regs.besctl &= ~1;
    card->regs.besglobctl &= ~(1<<6);  // UYVY format selected
//  card->config.colkey_on=0; //!!!
    mga_vid_write_regs(card, 1);
    card->vid_in_use = 0;

    MOD_DEC_USE_COUNT;
    return 0;
}

static long long mga_vid_lseek(struct file *file, long long offset, int origin)
{
    return -ESPIPE;
}

static int mga_vid_open(struct inode *inode, struct file *file)
{
    mga_card_t * card;

    int minor = MINOR(inode->i_rdev);

    if(!file->private_data)
    {
        // we are not using devfs, use the minor
        // number to specify the card we are using

        // we don't have that many cards
        if(minor >= mga_cards_num)
            return -ENXIO;

        file->private_data = mga_cards[minor];
#ifdef MP_DEBUG
        printk(KERN_DEBUG "mga_vid: Not using devfs\n");
#endif
    }
#ifdef MP_DEBUG
    else {
        printk(KERN_DEBUG "mga_vid: Using devfs\n");
    }
#endif

    card = (mga_card_t *) file->private_data;

    if(card->vid_in_use == 1)
        return -EBUSY;

    card->vid_in_use = 1;
    MOD_INC_USE_COUNT;
    return 0;
}

#if LINUX_VERSION_CODE >= 0x020400
static struct file_operations mga_vid_fops =
{
    llseek:         mga_vid_lseek,
    read:           mga_vid_read,
    write:          mga_vid_write,
    ioctl:          mga_vid_ioctl,
    mmap:           mga_vid_mmap,
    open:           mga_vid_open,
    release:        mga_vid_release
};
#else
static struct file_operations mga_vid_fops =
{
    mga_vid_lseek,
    mga_vid_read,
    mga_vid_write,
    NULL,
    NULL,
    mga_vid_ioctl,
    mga_vid_mmap,
    mga_vid_open,
    NULL,
    mga_vid_release
};
#endif

static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400)
{
    unsigned int card_option;
// temp buffer for device filename creation used only by devfs
#ifdef CONFIG_DEVFS_FS
    char buffer[16];
#endif

    memset(card,0,sizeof(mga_card_t));
    card->irq = -1;

    card->pci_dev = dev;
    card->irq = dev->irq;
    card->is_g400 = is_g400;

    card->param_buff = kmalloc(PARAM_BUFF_SIZE,GFP_KERNEL);
    if(card->param_buff) card->param_buff_size = PARAM_BUFF_SIZE;

    card->brightness = mga_brightness[card_number];
    card->contrast = mga_contrast[card_number];
    card->top_reserved = mga_top_reserved[card_number];

#if LINUX_VERSION_CODE >= 0x020300
    card->mmio_base = ioremap_nocache(dev->resource[1].start,0x4000);
    card->mem_base =  dev->resource[0].start;
#else
    card->mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000);
    card->mem_base =  dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK;
#endif
    printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d  framebuffer: 0x%08X\n", card->mmio_base, card->irq, card->mem_base);

    pci_read_config_dword(dev,  0x40, &card_option);
    printk(KERN_INFO "mga_vid: OPTION word: 0x%08X  mem: 0x%02X  %s\n", card_option,
           (card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM");

    if (mga_ram_size[card_number]) {
        printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size[card_number]);
        card->ram_size=mga_ram_size[card_number];
    } else {

#ifdef MGA_MEMORY_SIZE
        card->ram_size = MGA_MEMORY_SIZE;
        printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) card->ram_size);
#else
        if (card->is_g400){
            switch((card_option>>10)&0x17){
                // SDRAM:
            case 0x00:
            case 0x04:  card->ram_size = 16; break;
            case 0x03:
            case 0x05:  card->ram_size = 32; break;
                // SGRAM:
            case 0x10:
            case 0x14:  card->ram_size = 32; break;
            case 0x11:
            case 0x12:  card->ram_size = 16; break;
            default:
                card->ram_size = 16;
                printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!");
            }
            /* Check for buggy 16MB cards reporting 32 MB */
            if(card->ram_size != 16 &&
               (dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM ||
                dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM ||
                dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB))
            {
                printk(KERN_INFO "mga_vid: Detected 16MB card reporting %d MB RAMSIZE, overriding\n", card->ram_size);
                card->ram_size = 16;
            }
        }else{
            switch((card_option>>10)&0x17){
//              case 0x10:
//              case 0x13:  card->ram_size = 8; break;
            default: card->ram_size = 8;
            }
        }
#if 0
//      printk("List resources -----------\n");
        for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){
            struct resource *res=&dev->resource[temp];
            if(res->flags){
                int size=(1+res->end-res->start)>>20;
                printk(KERN_DEBUG "res %d:  start: 0x%X   end: 0x%X  (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags);
                if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){
                    if(size>card->ram_size && size<=64) card->ram_size=size;
                }
            }
        }
#endif
        printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) card->ram_size);
#endif
    }


#ifdef MGA_ALLOW_IRQ
    if ( card->irq != -1 ) {
        int tmp = request_irq(card->irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", card);
        if ( tmp ) {
            printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", card->irq, tmp);
            card->irq=-1;
        } else {
            printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", card->irq);
        }
    } else {
        printk(KERN_INFO "syncfb (mga): No valid irq was found\n");
        card->irq=-1;
    }
#else
    printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n");
    card->irq=-1;
#endif

    // register devfs, let the kernel give us major and minor numbers
#ifdef CONFIG_DEVFS_FS
    snprintf(buffer, 16, "mga_vid%d", card_number);
    card->dev_handle = devfs_register(NULL, buffer, DEVFS_FL_AUTO_DEVNUM,
                                      0, 0,
                                      S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR,
                                      &mga_vid_fops, card);
#endif
}

/*
 * Main Initialization Function
 */

static int mga_vid_initialize(void)
{
    int i;

//  printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n");
    printk(KERN_INFO "Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n");

    for(i = 0; i < MGA_MAX_CARDS; i++)
    {
        if (mga_ram_size[i]) {
            if (mga_ram_size[i]<4 || mga_ram_size[i]>64) {
                printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size[i]);
                return -EINVAL;
            }
        }
    }

    if(register_chrdev(major, "mga_vid", &mga_vid_fops))
    {
        printk(KERN_ERR "mga_vid: unable to get major: %d\n", major);
        return -EIO;
    }

    if (!mga_vid_find_card())
    {
        printk(KERN_ERR "mga_vid: no supported devices found\n");
        unregister_chrdev(major, "mga_vid");
        return -EINVAL;
    }
#ifdef CONFIG_DEVFS_FS
    else {
        // we assume that this always succeedes
        dev_handle = devfs_register(NULL, "mga_vid", DEVFS_FL_AUTO_DEVNUM,
                                    0,0,
                                    S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR,
                                    &mga_vid_fops, mga_cards[0]);
    }
#endif

    return 0;
}

int init_module(void)
{
    return mga_vid_initialize();
}

void cleanup_module(void)
{
    int i;
    mga_card_t * card;

    for (i = 0; i < MGA_MAX_CARDS; i++)
    {
        card = mga_cards[i];
        if(card)
        {
#ifdef MGA_ALLOW_IRQ
            if (card->irq != -1)
                free_irq(card->irq, &(card->irq));
#endif

            if(card->mmio_base)
                iounmap(card->mmio_base);
            if(card->param_buff)
                kfree(card->param_buff);
#ifdef CONFIG_DEVFS_FS
            if(card->dev_handle) devfs_unregister(card->dev_handle);
#endif

            kfree(card);
            mga_cards[i]=NULL;
        }
    }

    //FIXME turn off BES
    printk(KERN_INFO "mga_vid: Cleaning up module\n");
#ifdef CONFIG_DEVFS_FS
    if(dev_handle) devfs_unregister(dev_handle);
#endif
    unregister_chrdev(major, "mga_vid");
}