Mercurial > mplayer.hg
annotate drivers/mga_vid.c @ 16807:f11cf6fe9599
Formal syncing. Typo hunting.
author | jheryan |
---|---|
date | Wed, 19 Oct 2005 12:09:56 +0000 |
parents | 6e35326c742f |
children | 6ab7d3a5efb0 |
rev | line source |
---|---|
2345 | 1 //#define CRTC2 |
2 | |
1 | 3 // YUY2 support (see config.format) added by A'rpi/ESP-team |
57 | 4 // double buffering added by A'rpi/ESP-team |
5623 | 5 // brightness/contrast introduced by eyck |
10743 | 6 // multiple card support by Attila Kinali <attila@kinali.ch> |
57 | 7 |
8 // Set this value, if autodetection fails! (video ram size in megabytes) | |
91 | 9 // #define MGA_MEMORY_SIZE 16 |
1 | 10 |
68 | 11 //#define MGA_ALLOW_IRQ |
12 | |
13 #define MGA_VSYNC_POS 2 | |
14 | |
1 | 15 /* |
16 * | |
17 * mga_vid.c | |
18 * | |
19 * Copyright (C) 1999 Aaron Holtzman | |
20 * | |
21 * Module skeleton based on gutted agpgart module by Jeff Hartmann | |
22 * <slicer@ionet.net> | |
23 * | |
24 * Matrox MGA G200/G400 YUV Video Interface module Version 0.1.0 | |
25 * | |
26 * BES == Back End Scaler | |
27 * | |
28 * This software has been released under the terms of the GNU Public | |
29 * license. See http://www.gnu.org/copyleft/gpl.html for details. | |
30 */ | |
31 | |
32 //It's entirely possible this major conflicts with something else | |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
33 //use the 'major' parameter to override the default major number (178) |
1 | 34 /* mknod /dev/mga_vid c 178 0 */ |
35 | |
36 #include <linux/config.h> | |
37 #include <linux/version.h> | |
38 #include <linux/module.h> | |
39 #include <linux/types.h> | |
40 #include <linux/kernel.h> | |
41 #include <linux/sched.h> | |
42 #include <linux/mm.h> | |
43 #include <linux/string.h> | |
44 #include <linux/errno.h> | |
3125
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
45 |
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
46 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) |
1 | 47 #include <linux/malloc.h> |
3125
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
48 #else |
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
49 #include <linux/slab.h> |
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
50 #endif |
d62aa0b7fd68
use <linux/slab.h> instead of <linux/malloc.h> for kernels 2.4.9+
szabi
parents:
2345
diff
changeset
|
51 |
1 | 52 #include <linux/pci.h> |
63 | 53 #include <linux/ioport.h> |
1 | 54 #include <linux/init.h> |
55 | |
56 #include "mga_vid.h" | |
57 | |
58 #ifdef CONFIG_MTRR | |
59 #include <asm/mtrr.h> | |
60 #endif | |
61 | |
5653
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
62 #ifdef CONFIG_DEVFS_FS |
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
63 #include <linux/devfs_fs_kernel.h> |
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
64 #endif |
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
65 |
1 | 66 #include <asm/uaccess.h> |
67 #include <asm/system.h> | |
68 #include <asm/io.h> | |
69 | |
70 #define TRUE 1 | |
71 #define FALSE 0 | |
72 | |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
73 #define DEFAULT_MGA_VID_MAJOR 178 |
1 | 74 |
75 #ifndef PCI_DEVICE_ID_MATROX_G200_PCI | |
76 #define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 | |
77 #endif | |
78 | |
79 #ifndef PCI_DEVICE_ID_MATROX_G200_AGP | |
80 #define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 | |
81 #endif | |
82 | |
83 #ifndef PCI_DEVICE_ID_MATROX_G400 | |
84 #define PCI_DEVICE_ID_MATROX_G400 0x0525 | |
85 #endif | |
86 | |
1989 | 87 #ifndef PCI_DEVICE_ID_MATROX_G550 |
88 #define PCI_DEVICE_ID_MATROX_G550 0x2527 | |
89 #endif | |
90 | |
9518
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
91 #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
92 #define PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB 0x2159 |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
93 #endif |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
94 |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
95 #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
96 #define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM 0x19d8 |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
97 #endif |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
98 |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
99 #ifndef PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
100 #define PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM 0x0328 |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
101 #endif |
182d6c136095
workaround wrong detected memory sizes on G400 cards.
attila
parents:
9449
diff
changeset
|
102 |
1 | 103 MODULE_AUTHOR("Aaron Holtzman <aholtzma@engr.uvic.ca>"); |
2262 | 104 #ifdef MODULE_LICENSE |
105 MODULE_LICENSE("GPL"); | |
106 #endif | |
1 | 107 |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
108 #define PARAM_BRIGHTNESS "brightness=" |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
109 #define PARAM_CONTRAST "contrast=" |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
110 #define PARAM_BLACKIE "blackie=" |
4484 | 111 |
10743 | 112 // set PARAM_BUFF_SIZE to just below 4k because some kernel versions |
113 // store additional information in the memory page which leads to | |
114 // the allocation of an additional page if exactly 4k is used | |
115 #define PARAM_BUFF_SIZE 4000 | |
4484 | 116 |
5764 | 117 #ifndef min |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
118 #define min(x,y) (((x)<(y))?(x):(y)) |
5764 | 119 #endif |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
120 |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
121 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
122 #include <linux/ctype.h> |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
123 |
5884 | 124 static unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base) |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
125 { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
126 unsigned long result = 0,value; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
127 |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
128 if (!base) { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
129 base = 10; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
130 if (*cp == '0') { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
131 base = 8; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
132 cp++; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
133 if ((*cp == 'x') && isxdigit(cp[1])) { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
134 cp++; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
135 base = 16; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
136 } |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
137 } |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
138 } |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
139 while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
140 ? toupper(*cp) : *cp)-'A'+10) < base) { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
141 result = result*base + value; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
142 cp++; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
143 } |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
144 if (endp) |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
145 *endp = (char *)cp; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
146 return result; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
147 } |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
148 #endif |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
149 |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
150 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0) || LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,5) |
5884 | 151 static long simple_strtol(const char *cp,char **endp,unsigned int base) |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
152 { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
153 if(*cp=='-') |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
154 return -simple_strtoul(cp+1,endp,base); |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
155 return simple_strtoul(cp,endp,base); |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
156 } |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
157 #endif |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
158 |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
159 |
1 | 160 typedef struct bes_registers_s |
161 { | |
162 //BES Control | |
163 uint32_t besctl; | |
164 //BES Global control | |
165 uint32_t besglobctl; | |
166 //Luma control (brightness and contrast) | |
167 uint32_t beslumactl; | |
168 //Line pitch | |
169 uint32_t bespitch; | |
170 | |
171 //Buffer A-1 Chroma 3 plane org | |
172 uint32_t besa1c3org; | |
173 //Buffer A-1 Chroma org | |
174 uint32_t besa1corg; | |
175 //Buffer A-1 Luma org | |
176 uint32_t besa1org; | |
177 | |
178 //Buffer A-2 Chroma 3 plane org | |
179 uint32_t besa2c3org; | |
180 //Buffer A-2 Chroma org | |
181 uint32_t besa2corg; | |
182 //Buffer A-2 Luma org | |
183 uint32_t besa2org; | |
184 | |
185 //Buffer B-1 Chroma 3 plane org | |
186 uint32_t besb1c3org; | |
187 //Buffer B-1 Chroma org | |
188 uint32_t besb1corg; | |
189 //Buffer B-1 Luma org | |
190 uint32_t besb1org; | |
191 | |
192 //Buffer B-2 Chroma 3 plane org | |
193 uint32_t besb2c3org; | |
194 //Buffer B-2 Chroma org | |
195 uint32_t besb2corg; | |
196 //Buffer B-2 Luma org | |
197 uint32_t besb2org; | |
198 | |
199 //BES Horizontal coord | |
200 uint32_t beshcoord; | |
201 //BES Horizontal inverse scaling [5.14] | |
202 uint32_t beshiscal; | |
203 //BES Horizontal source start [10.14] (for scaling) | |
204 uint32_t beshsrcst; | |
205 //BES Horizontal source ending [10.14] (for scaling) | |
206 uint32_t beshsrcend; | |
207 //BES Horizontal source last | |
208 uint32_t beshsrclst; | |
209 | |
210 | |
211 //BES Vertical coord | |
212 uint32_t besvcoord; | |
213 //BES Vertical inverse scaling [5.14] | |
214 uint32_t besviscal; | |
215 //BES Field 1 vertical source last position | |
216 uint32_t besv1srclst; | |
217 //BES Field 1 weight start | |
218 uint32_t besv1wght; | |
219 //BES Field 2 vertical source last position | |
220 uint32_t besv2srclst; | |
221 //BES Field 2 weight start | |
222 uint32_t besv2wght; | |
223 | |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
224 |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
225 //configurable stuff |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
226 int blackie; |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
227 |
1 | 228 } bes_registers_t; |
229 | |
2344 | 230 #ifdef CRTC2 |
231 typedef struct crtc2_registers_s | |
232 { | |
233 uint32_t c2ctl; | |
234 uint32_t c2datactl; | |
235 uint32_t c2misc; | |
236 uint32_t c2hparam; | |
237 uint32_t c2hsync; | |
238 uint32_t c2offset; | |
239 uint32_t c2pl2startadd0; | |
240 uint32_t c2pl2startadd1; | |
241 uint32_t c2pl3startadd0; | |
242 uint32_t c2pl3startadd1; | |
243 uint32_t c2preload; | |
244 uint32_t c2spicstartadd0; | |
245 uint32_t c2spicstartadd1; | |
246 uint32_t c2startadd0; | |
247 uint32_t c2startadd1; | |
248 uint32_t c2subpiclut; | |
249 uint32_t c2vcount; | |
250 uint32_t c2vparam; | |
251 uint32_t c2vsync; | |
252 } crtc2_registers_t; | |
5653
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
253 #endif |
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
254 |
10743 | 255 |
2086 | 256 |
10743 | 257 |
1 | 258 |
259 //All register offsets are converted to word aligned offsets (32 bit) | |
260 //because we want all our register accesses to be 32 bits | |
261 #define VCOUNT 0x1e20 | |
262 | |
263 #define PALWTADD 0x3c00 // Index register for X_DATAREG port | |
264 #define X_DATAREG 0x3c0a | |
265 | |
266 #define XMULCTRL 0x19 | |
267 #define BPP_8 0x00 | |
268 #define BPP_15 0x01 | |
269 #define BPP_16 0x02 | |
270 #define BPP_24 0x03 | |
271 #define BPP_32_DIR 0x04 | |
272 #define BPP_32_PAL 0x07 | |
273 | |
274 #define XCOLMSK 0x40 | |
275 #define X_COLKEY 0x42 | |
276 #define XKEYOPMODE 0x51 | |
277 #define XCOLMSK0RED 0x52 | |
278 #define XCOLMSK0GREEN 0x53 | |
279 #define XCOLMSK0BLUE 0x54 | |
280 #define XCOLKEY0RED 0x55 | |
281 #define XCOLKEY0GREEN 0x56 | |
282 #define XCOLKEY0BLUE 0x57 | |
283 | |
2344 | 284 #ifdef CRTC2 |
285 | |
286 /*CRTC2 registers*/ | |
287 #define XMISCCTRL 0x1e | |
288 #define C2CTL 0x3c10 | |
289 #define C2DATACTL 0x3c4c | |
290 #define C2MISC 0x3c44 | |
291 #define C2HPARAM 0x3c14 | |
292 #define C2HSYNC 0x3c18 | |
293 #define C2OFFSET 0x3c40 | |
294 #define C2PL2STARTADD0 0x3c30 // like BESA1CORG | |
295 #define C2PL2STARTADD1 0x3c34 // like BESA2CORG | |
296 #define C2PL3STARTADD0 0x3c38 // like BESA1C3ORG | |
297 #define C2PL3STARTADD1 0x3c3c // like BESA2C3ORG | |
298 #define C2PRELOAD 0x3c24 | |
299 #define C2SPICSTARTADD0 0x3c54 | |
300 #define C2SPICSTARTADD1 0x3c58 | |
301 #define C2STARTADD0 0x3c28 // like BESA1ORG | |
302 #define C2STARTADD1 0x3c2c // like BESA2ORG | |
303 #define C2SUBPICLUT 0x3c50 | |
304 #define C2VCOUNT 0x3c48 | |
305 #define C2VPARAM 0x3c1c | |
306 #define C2VSYNC 0x3c20 | |
307 | |
308 #endif | |
309 | |
1 | 310 // Backend Scaler registers |
311 #define BESCTL 0x3d20 | |
312 #define BESGLOBCTL 0x3dc0 | |
313 #define BESLUMACTL 0x3d40 | |
314 #define BESPITCH 0x3d24 | |
48 | 315 |
1 | 316 #define BESA1C3ORG 0x3d60 |
317 #define BESA1CORG 0x3d10 | |
318 #define BESA1ORG 0x3d00 | |
48 | 319 |
1 | 320 #define BESA2C3ORG 0x3d64 |
321 #define BESA2CORG 0x3d14 | |
322 #define BESA2ORG 0x3d04 | |
48 | 323 |
1 | 324 #define BESB1C3ORG 0x3d68 |
325 #define BESB1CORG 0x3d18 | |
326 #define BESB1ORG 0x3d08 | |
48 | 327 |
1 | 328 #define BESB2C3ORG 0x3d6C |
329 #define BESB2CORG 0x3d1C | |
330 #define BESB2ORG 0x3d0C | |
48 | 331 |
1 | 332 #define BESHCOORD 0x3d28 |
333 #define BESHISCAL 0x3d30 | |
334 #define BESHSRCEND 0x3d3C | |
335 #define BESHSRCLST 0x3d50 | |
336 #define BESHSRCST 0x3d38 | |
337 #define BESV1WGHT 0x3d48 | |
338 #define BESV2WGHT 0x3d4c | |
339 #define BESV1SRCLST 0x3d54 | |
340 #define BESV2SRCLST 0x3d58 | |
341 #define BESVISCAL 0x3d34 | |
342 #define BESVCOORD 0x3d2c | |
343 #define BESSTATUS 0x3dc4 | |
344 | |
48 | 345 #define CRTCX 0x1fd4 |
346 #define CRTCD 0x1fd5 | |
347 #define IEN 0x1e1c | |
348 #define ICLEAR 0x1e18 | |
349 #define STATUS 0x1e14 | |
350 | |
10743 | 351 |
352 // global devfs handle for /dev/mga_vid | |
353 #ifdef CONFIG_DEVFS_FS | |
354 static devfs_handle_t dev_handle = NULL; | |
355 #endif | |
356 | |
357 // card local config | |
358 typedef struct mga_card_s { | |
359 | |
360 // local devfs handle for /dev/mga_vidX | |
361 #ifdef CONFIG_DEVFS_FS | |
362 devfs_handle_t dev_handle; | |
363 #endif | |
364 | |
365 uint8_t *param_buff; // buffer for read() | |
366 uint32_t param_buff_size; | |
367 uint32_t param_buff_len; | |
368 bes_registers_t regs; | |
369 #ifdef CRTC2 | |
370 crtc2_registers_t cregs; | |
371 #endif | |
372 uint32_t vid_in_use; | |
373 uint32_t is_g400; | |
374 uint32_t vid_src_ready; | |
375 uint32_t vid_overlay_on; | |
376 | |
377 uint8_t *mmio_base; | |
378 uint32_t mem_base; | |
379 int src_base; // YUV buffer position in video memory | |
380 uint32_t ram_size; // how much megabytes videoram we have | |
381 uint32_t top_reserved; // reserved space for console font (matroxfb + fastfont) | |
382 | |
383 int brightness; // initial brightness | |
384 int contrast; // initial contrast | |
385 | |
386 struct pci_dev *pci_dev; | |
387 | |
388 mga_vid_config_t config; | |
389 int configured; // set to 1 when the card is configured over ioctl | |
390 | |
391 int colkey_saved; | |
392 int colkey_on; | |
393 unsigned char colkey_color[4]; | |
394 unsigned char colkey_mask[4]; | |
395 | |
396 int irq; // = -1 | |
397 int next_frame; | |
398 } mga_card_t; | |
399 | |
400 #define MGA_MAX_CARDS 16 | |
401 // this is used as init value for the parameter arrays | |
402 // it should have exactly MGA_MAX_CARDS elements | |
403 #define MGA_MAX_CARDS_INIT_ARRAY {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} | |
404 static unsigned int mga_cards_num=0; | |
405 static mga_card_t * mga_cards[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; | |
406 | |
407 // module parameters | |
408 static int major = DEFAULT_MGA_VID_MAJOR; | |
409 static int mga_ram_size[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; | |
410 static int mga_brightness[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; | |
411 static int mga_contrast[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; | |
412 static int mga_top_reserved[MGA_MAX_CARDS] = MGA_MAX_CARDS_INIT_ARRAY; | |
413 | |
414 MODULE_PARM(mga_ram_size, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); | |
415 MODULE_PARM(mga_top_reserved, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); | |
416 MODULE_PARM(mga_brightness, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); | |
417 MODULE_PARM(mga_contrast, "1-" __MODULE_STRING(MGA_MAX_CARDS) "i"); | |
418 MODULE_PARM(major, "i"); | |
1 | 419 |
2344 | 420 #ifdef CRTC2 |
10743 | 421 static void crtc2_frame_sel(mga_card_t * card, int frame) |
2344 | 422 { |
423 switch(frame) { | |
424 case 0: | |
10743 | 425 card->cregs.c2pl2startadd0=card->regs.besa1corg; |
426 card->cregs.c2pl3startadd0=card->regs.besa1c3org; | |
427 card->cregs.c2startadd0=card->regs.besa1org; | |
2344 | 428 break; |
429 case 1: | |
10743 | 430 card->cregs.c2pl2startadd0=card->regs.besa2corg; |
431 card->cregs.c2pl3startadd0=card->regs.besa2c3org; | |
432 card->cregs.c2startadd0=card->regs.besa2org; | |
2344 | 433 break; |
434 case 2: | |
10743 | 435 card->cregs.c2pl2startadd0=card->regs.besb1corg; |
436 card->cregs.c2pl3startadd0=card->regs.besb1c3org; | |
437 card->cregs.c2startadd0=card->regs.besb1org; | |
2344 | 438 break; |
439 case 3: | |
10743 | 440 card->cregs.c2pl2startadd0=card->regs.besb2corg; |
441 card->cregs.c2pl3startadd0=card->regs.besb2c3org; | |
442 card->cregs.c2startadd0=card->regs.besb2org; | |
2344 | 443 break; |
444 } | |
10743 | 445 writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0); |
446 writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0); | |
447 writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0); | |
2344 | 448 } |
449 #endif | |
450 | |
10743 | 451 static void mga_vid_frame_sel(mga_card_t * card, int frame) |
1 | 452 { |
10743 | 453 if ( card->irq != -1 ) { |
454 card->next_frame=frame; | |
48 | 455 } else { |
456 | |
1 | 457 //we don't need the vcount protection as we're only hitting |
458 //one register (and it doesn't seem to be double buffered) | |
10743 | 459 card->regs.besctl = (card->regs.besctl & ~0x07000000) + (frame << 25); |
460 writel( card->regs.besctl, card->mmio_base + BESCTL ); | |
68 | 461 |
10743 | 462 // writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16), |
463 writel( card->regs.besglobctl + (MGA_VSYNC_POS<<16), | |
464 card->mmio_base + BESGLOBCTL); | |
2344 | 465 #ifdef CRTC2 |
10743 | 466 crtc2_frame_sel(card, frame); |
2344 | 467 #endif |
68 | 468 |
48 | 469 } |
1 | 470 } |
471 | |
472 | |
10743 | 473 static void mga_vid_write_regs(mga_card_t * card, int restore) |
1 | 474 { |
475 //Make sure internal registers don't get updated until we're done | |
10743 | 476 writel( (readl(card->mmio_base + VCOUNT)-1)<<16, |
477 card->mmio_base + BESGLOBCTL); | |
1 | 478 |
479 // color or coordinate keying | |
2086 | 480 |
10743 | 481 if(restore && card->colkey_saved){ |
2086 | 482 // restore it |
10743 | 483 card->colkey_saved=0; |
2086 | 484 |
5623 | 485 #ifdef MP_DEBUG |
2086 | 486 printk("mga_vid: Restoring colorkey (ON: %d %02X:%02X:%02X)\n", |
10743 | 487 card->colkey_on,card->colkey_color[0],card->colkey_color[1],card->colkey_color[2]); |
5623 | 488 #endif |
2086 | 489 |
490 // Set color key registers: | |
10743 | 491 writeb( XKEYOPMODE, card->mmio_base + PALWTADD); |
492 writeb( card->colkey_on, card->mmio_base + X_DATAREG); | |
2086 | 493 |
10743 | 494 writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); |
495 writeb( card->colkey_color[0], card->mmio_base + X_DATAREG); | |
496 writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); | |
497 writeb( card->colkey_color[1], card->mmio_base + X_DATAREG); | |
498 writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); | |
499 writeb( card->colkey_color[2], card->mmio_base + X_DATAREG); | |
500 writeb( X_COLKEY, card->mmio_base + PALWTADD); | |
501 writeb( card->colkey_color[3], card->mmio_base + X_DATAREG); | |
2086 | 502 |
10743 | 503 writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); |
504 writeb( card->colkey_mask[0], card->mmio_base + X_DATAREG); | |
505 writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); | |
506 writeb( card->colkey_mask[1], card->mmio_base + X_DATAREG); | |
507 writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); | |
508 writeb( card->colkey_mask[2], card->mmio_base + X_DATAREG); | |
509 writeb( XCOLMSK, card->mmio_base + PALWTADD); | |
510 writeb( card->colkey_mask[3], card->mmio_base + X_DATAREG); | |
2086 | 511 |
10743 | 512 } else if(!card->colkey_saved){ |
2086 | 513 // save it |
10743 | 514 card->colkey_saved=1; |
2086 | 515 // Get color key registers: |
10743 | 516 writeb( XKEYOPMODE, card->mmio_base + PALWTADD); |
517 card->colkey_on=(unsigned char)readb(card->mmio_base + X_DATAREG) & 1; | |
2086 | 518 |
10743 | 519 writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); |
520 card->colkey_color[0]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
521 writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); | |
522 card->colkey_color[1]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
523 writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); | |
524 card->colkey_color[2]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
525 writeb( X_COLKEY, card->mmio_base + PALWTADD); | |
526 card->colkey_color[3]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
2086 | 527 |
10743 | 528 writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); |
529 card->colkey_mask[0]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
530 writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); | |
531 card->colkey_mask[1]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
532 writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); | |
533 card->colkey_mask[2]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
534 writeb( XCOLMSK, card->mmio_base + PALWTADD); | |
535 card->colkey_mask[3]=(unsigned char)readb(card->mmio_base + X_DATAREG); | |
2086 | 536 |
5623 | 537 #ifdef MP_DEBUG |
2086 | 538 printk("mga_vid: Saved colorkey (ON: %d %02X:%02X:%02X)\n", |
10743 | 539 card->colkey_on, card->colkey_color[0], card->colkey_color[1], card->colkey_color[2]); |
5623 | 540 #endif |
2086 | 541 |
542 } | |
543 | |
544 if(!restore){ | |
10743 | 545 writeb( XKEYOPMODE, card->mmio_base + PALWTADD); |
546 writeb( card->config.colkey_on, card->mmio_base + X_DATAREG); | |
547 if ( card->config.colkey_on ) | |
1 | 548 { |
549 uint32_t r=0, g=0, b=0; | |
550 | |
10743 | 551 writeb( XMULCTRL, card->mmio_base + PALWTADD); |
552 switch (readb (card->mmio_base + X_DATAREG)) | |
1 | 553 { |
554 case BPP_8: | |
10743 | 555 /* Need to look up the color index, just using color 0 for now. */ |
1 | 556 break; |
557 | |
558 case BPP_15: | |
10743 | 559 r = card->config.colkey_red >> 3; |
560 g = card->config.colkey_green >> 3; | |
561 b = card->config.colkey_blue >> 3; | |
1 | 562 break; |
563 | |
564 case BPP_16: | |
10743 | 565 r = card->config.colkey_red >> 3; |
566 g = card->config.colkey_green >> 2; | |
567 b = card->config.colkey_blue >> 3; | |
1 | 568 break; |
569 | |
570 case BPP_24: | |
571 case BPP_32_DIR: | |
572 case BPP_32_PAL: | |
10743 | 573 r = card->config.colkey_red; |
574 g = card->config.colkey_green; | |
575 b = card->config.colkey_blue; | |
1 | 576 break; |
577 } | |
578 | |
579 // Disable color keying on alpha channel | |
10743 | 580 writeb( XCOLMSK, card->mmio_base + PALWTADD); |
581 writeb( 0x00, card->mmio_base + X_DATAREG); | |
582 writeb( X_COLKEY, card->mmio_base + PALWTADD); | |
583 writeb( 0x00, card->mmio_base + X_DATAREG); | |
1 | 584 |
2086 | 585 |
1 | 586 // Set up color key registers |
10743 | 587 writeb( XCOLKEY0RED, card->mmio_base + PALWTADD); |
588 writeb( r, card->mmio_base + X_DATAREG); | |
589 writeb( XCOLKEY0GREEN, card->mmio_base + PALWTADD); | |
590 writeb( g, card->mmio_base + X_DATAREG); | |
591 writeb( XCOLKEY0BLUE, card->mmio_base + PALWTADD); | |
592 writeb( b, card->mmio_base + X_DATAREG); | |
1 | 593 |
594 // Set up color key mask registers | |
10743 | 595 writeb( XCOLMSK0RED, card->mmio_base + PALWTADD); |
596 writeb( 0xff, card->mmio_base + X_DATAREG); | |
597 writeb( XCOLMSK0GREEN, card->mmio_base + PALWTADD); | |
598 writeb( 0xff, card->mmio_base + X_DATAREG); | |
599 writeb( XCOLMSK0BLUE, card->mmio_base + PALWTADD); | |
600 writeb( 0xff, card->mmio_base + X_DATAREG); | |
1 | 601 } |
602 | |
2086 | 603 } |
604 | |
1 | 605 // Backend Scaler |
10743 | 606 writel( card->regs.besctl, card->mmio_base + BESCTL); |
607 if(card->is_g400) | |
608 writel( card->regs.beslumactl, card->mmio_base + BESLUMACTL); | |
609 writel( card->regs.bespitch, card->mmio_base + BESPITCH); | |
1 | 610 |
10743 | 611 writel( card->regs.besa1org, card->mmio_base + BESA1ORG); |
612 writel( card->regs.besa1corg, card->mmio_base + BESA1CORG); | |
613 writel( card->regs.besa2org, card->mmio_base + BESA2ORG); | |
614 writel( card->regs.besa2corg, card->mmio_base + BESA2CORG); | |
615 writel( card->regs.besb1org, card->mmio_base + BESB1ORG); | |
616 writel( card->regs.besb1corg, card->mmio_base + BESB1CORG); | |
617 writel( card->regs.besb2org, card->mmio_base + BESB2ORG); | |
618 writel( card->regs.besb2corg, card->mmio_base + BESB2CORG); | |
619 if(card->is_g400) | |
1 | 620 { |
10743 | 621 writel( card->regs.besa1c3org, card->mmio_base + BESA1C3ORG); |
622 writel( card->regs.besa2c3org, card->mmio_base + BESA2C3ORG); | |
623 writel( card->regs.besb1c3org, card->mmio_base + BESB1C3ORG); | |
624 writel( card->regs.besb2c3org, card->mmio_base + BESB2C3ORG); | |
1 | 625 } |
626 | |
10743 | 627 writel( card->regs.beshcoord, card->mmio_base + BESHCOORD); |
628 writel( card->regs.beshiscal, card->mmio_base + BESHISCAL); | |
629 writel( card->regs.beshsrcst, card->mmio_base + BESHSRCST); | |
630 writel( card->regs.beshsrcend, card->mmio_base + BESHSRCEND); | |
631 writel( card->regs.beshsrclst, card->mmio_base + BESHSRCLST); | |
1 | 632 |
10743 | 633 writel( card->regs.besvcoord, card->mmio_base + BESVCOORD); |
634 writel( card->regs.besviscal, card->mmio_base + BESVISCAL); | |
48 | 635 |
10743 | 636 writel( card->regs.besv1srclst, card->mmio_base + BESV1SRCLST); |
637 writel( card->regs.besv1wght, card->mmio_base + BESV1WGHT); | |
638 writel( card->regs.besv2srclst, card->mmio_base + BESV2SRCLST); | |
639 writel( card->regs.besv2wght, card->mmio_base + BESV2WGHT); | |
1 | 640 |
641 //update the registers somewhere between 1 and 2 frames from now. | |
10743 | 642 writel( card->regs.besglobctl + ((readl(card->mmio_base + VCOUNT)+2)<<16), |
643 card->mmio_base + BESGLOBCTL); | |
1 | 644 |
77 | 645 #if 0 |
61 | 646 printk(KERN_DEBUG "mga_vid: wrote BES registers\n"); |
647 printk(KERN_DEBUG "mga_vid: BESCTL = 0x%08x\n", | |
10743 | 648 readl(card->mmio_base + BESCTL)); |
61 | 649 printk(KERN_DEBUG "mga_vid: BESGLOBCTL = 0x%08x\n", |
10743 | 650 readl(card->mmio_base + BESGLOBCTL)); |
61 | 651 printk(KERN_DEBUG "mga_vid: BESSTATUS= 0x%08x\n", |
10743 | 652 readl(card->mmio_base + BESSTATUS)); |
77 | 653 #endif |
2344 | 654 #ifdef CRTC2 |
10743 | 655 // printk("c2ctl:0x%08x c2datactl:0x%08x\n", readl(card->mmio_base + C2CTL), readl(card->mmio_base + C2DATACTL)); |
656 // printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC)); | |
657 // printk("c2ctl:0x%08x c2datactl:0x%08x\n", card->cregs.c2ctl, card->cregs.c2datactl); | |
2344 | 658 |
10743 | 659 // writel(card->cregs.c2ctl, card->mmio_base + C2CTL); |
2344 | 660 |
10743 | 661 writel(((readl(card->mmio_base + C2CTL) & ~0x03e00000) + (card->cregs.c2ctl & 0x03e00000)), card->mmio_base + C2CTL); |
662 writel(((readl(card->mmio_base + C2DATACTL) & ~0x000000ff) + (card->cregs.c2datactl & 0x000000ff)), card->mmio_base + C2DATACTL); | |
2344 | 663 // ctrc2 |
664 // disable CRTC2 acording to specs | |
10743 | 665 // writel(card->cregs.c2ctl & 0xfffffff0, card->mmio_base + C2CTL); |
2344 | 666 // je to treba ??? |
10743 | 667 // writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0xa2, card->mmio_base + XMISCCTRL); // MAFC - mfcsel & vdoutsel |
668 // writeb((readb(card->mmio_base + XMISCCTRL) & 0x19) | 0x92, card->mmio_base + XMISCCTRL); | |
669 // writeb((readb(card->mmio_base + XMISCCTRL) & ~0xe9) + 0xa2, card->mmio_base + XMISCCTRL); | |
670 // writel(card->cregs.c2datactl, card->mmio_base + C2DATACTL); | |
671 // writel(card->cregs.c2hparam, card->mmio_base + C2HPARAM); | |
672 // writel(card->cregs.c2hsync, card->mmio_base + C2HSYNC); | |
673 // writel(card->cregs.c2vparam, card->mmio_base + C2VPARAM); | |
674 // writel(card->cregs.c2vsync, card->mmio_base + C2VSYNC); | |
675 writel(card->cregs.c2misc, card->mmio_base + C2MISC); | |
2344 | 676 |
5623 | 677 #ifdef MP_DEBUG |
10743 | 678 printk("c2offset = %d\n",card->cregs.c2offset); |
5623 | 679 #endif |
2344 | 680 |
10743 | 681 writel(card->cregs.c2offset, card->mmio_base + C2OFFSET); |
682 writel(card->cregs.c2startadd0, card->mmio_base + C2STARTADD0); | |
683 // writel(card->cregs.c2startadd1, card->mmio_base + C2STARTADD1); | |
684 writel(card->cregs.c2pl2startadd0, card->mmio_base + C2PL2STARTADD0); | |
685 // writel(card->cregs.c2pl2startadd1, card->mmio_base + C2PL2STARTADD1); | |
686 writel(card->cregs.c2pl3startadd0, card->mmio_base + C2PL3STARTADD0); | |
687 // writel(card->cregs.c2pl3startadd1, card->mmio_base + C2PL3STARTADD1); | |
688 writel(card->cregs.c2spicstartadd0, card->mmio_base + C2SPICSTARTADD0); | |
689 // writel(card->cregs.c2spicstartadd1, card->mmio_base + C2SPICSTARTADD1); | |
690 // writel(card->cregs.c2subpiclut, card->mmio_base + C2SUBPICLUT); | |
691 // writel(card->cregs.c2preload, card->mmio_base + C2PRELOAD); | |
2344 | 692 // finaly enable everything |
10743 | 693 // writel(card->cregs.c2ctl, card->mmio_base + C2CTL); |
694 // printk("c2ctl:0x%08x c2datactl:0x%08x\n",readl(card->mmio_base + C2CTL),readl(card->mmio_base + C2DATACTL)); | |
695 // printk("c2misc:0x%08x\n", readl(card->mmio_base + C2MISC)); | |
2344 | 696 #endif |
1 | 697 } |
698 | |
10743 | 699 static int mga_vid_set_config(mga_card_t * card) |
1 | 700 { |
701 int x, y, sw, sh, dw, dh; | |
702 int besleft, bestop, ifactor, ofsleft, ofstop, baseadrofs, weight, weights; | |
10743 | 703 mga_vid_config_t *config = &card->config; |
704 int frame_size = card->config.frame_size; | |
705 | |
2344 | 706 #ifdef CRTC2 |
707 #define right_margin 0 | |
708 #define left_margin 18 | |
709 #define hsync_len 46 | |
710 #define lower_margin 10 | |
711 #define vsync_len 4 | |
712 #define upper_margin 39 | |
713 | |
714 unsigned int hdispend = (config->src_width + 31) & ~31; | |
715 unsigned int hsyncstart = hdispend + (right_margin & ~7); | |
716 unsigned int hsyncend = hsyncstart + (hsync_len & ~7); | |
717 unsigned int htotal = hsyncend + (left_margin & ~7); | |
718 unsigned int vdispend = config->src_height; | |
719 unsigned int vsyncstart = vdispend + lower_margin; | |
720 unsigned int vsyncend = vsyncstart + vsync_len; | |
721 unsigned int vtotal = vsyncend + upper_margin; | |
722 #endif | |
1 | 723 x = config->x_org; |
724 y = config->y_org; | |
725 sw = config->src_width; | |
726 sh = config->src_height; | |
727 dw = config->dest_width; | |
728 dh = config->dest_height; | |
729 | |
5623 | 730 #ifdef MP_DEBUG |
61 | 731 printk(KERN_DEBUG "mga_vid: Setting up a %dx%d+%d+%d video window (src %dx%d) format %X\n", |
1 | 732 dw, dh, x, y, sw, sh, config->format); |
5623 | 733 #endif |
1 | 734 |
3959 | 735 if(sw<4 || sh<4 || dw<4 || dh<4){ |
736 printk(KERN_ERR "mga_vid: Invalid src/dest dimenstions\n"); | |
737 return -1; | |
738 } | |
739 | |
1 | 740 //FIXME check that window is valid and inside desktop |
741 | |
742 //Setup the BES registers for a three plane 4:2:0 video source | |
743 | |
10743 | 744 card->regs.besglobctl = 0; |
466 | 745 |
1 | 746 switch(config->format){ |
747 case MGA_VID_FORMAT_YV12: | |
470 | 748 case MGA_VID_FORMAT_I420: |
749 case MGA_VID_FORMAT_IYUV: | |
10743 | 750 card->regs.besctl = 1 // BES enabled |
1 | 751 + (0<<6) // even start polarity |
752 + (1<<10) // x filtering enabled | |
753 + (1<<11) // y filtering enabled | |
754 + (1<<16) // chroma upsampling | |
755 + (1<<17) // 4:2:0 mode | |
756 + (1<<18); // dither enabled | |
466 | 757 #if 0 |
10743 | 758 if(card->is_g400) |
1 | 759 { |
760 //zoom disabled, zoom filter disabled, 420 3 plane format, proc amp | |
761 //disabled, rgb mode disabled | |
10743 | 762 card->regs.besglobctl = (1<<5); |
1 | 763 } |
764 else | |
765 { | |
766 //zoom disabled, zoom filter disabled, Cb samples in 0246, Cr | |
767 //in 1357, BES register update on besvcnt | |
10743 | 768 card->regs.besglobctl = 0; |
1 | 769 } |
466 | 770 #endif |
1 | 771 break; |
772 | |
773 case MGA_VID_FORMAT_YUY2: | |
10743 | 774 card->regs.besctl = 1 // BES enabled |
1 | 775 + (0<<6) // even start polarity |
776 + (1<<10) // x filtering enabled | |
777 + (1<<11) // y filtering enabled | |
778 + (1<<16) // chroma upsampling | |
779 + (0<<17) // 4:2:2 mode | |
780 + (1<<18); // dither enabled | |
781 | |
10743 | 782 card->regs.besglobctl = 0; // YUY2 format selected |
1 | 783 break; |
466 | 784 |
785 case MGA_VID_FORMAT_UYVY: | |
10743 | 786 card->regs.besctl = 1 // BES enabled |
466 | 787 + (0<<6) // even start polarity |
788 + (1<<10) // x filtering enabled | |
789 + (1<<11) // y filtering enabled | |
790 + (1<<16) // chroma upsampling | |
791 + (0<<17) // 4:2:2 mode | |
792 + (1<<18); // dither enabled | |
793 | |
10743 | 794 card->regs.besglobctl = 1<<6; // UYVY format selected |
466 | 795 break; |
796 | |
1 | 797 default: |
61 | 798 printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format); |
1 | 799 return -1; |
800 } | |
801 | |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
802 // setting black&white mode |
10743 | 803 card->regs.besctl|=(card->regs.blackie<<20); |
1 | 804 |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
805 //Enable contrast and brightness control |
10743 | 806 card->regs.besglobctl |= (1<<5) + (1<<7); |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
807 |
6798 | 808 // brightness (-128..127) && contrast (0..255) |
10743 | 809 card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF); |
1 | 810 |
811 //Setup destination window boundaries | |
812 besleft = x > 0 ? x : 0; | |
813 bestop = y > 0 ? y : 0; | |
10743 | 814 card->regs.beshcoord = (besleft<<16) + (x + dw-1); |
815 card->regs.besvcoord = (bestop<<16) + (y + dh-1); | |
1 | 816 |
817 //Setup source dimensions | |
10743 | 818 card->regs.beshsrclst = (sw - 1) << 16; |
819 card->regs.bespitch = (sw + 31) & ~31 ; | |
1 | 820 |
821 //Setup horizontal scaling | |
822 ifactor = ((sw-1)<<14)/(dw-1); | |
823 ofsleft = besleft - x; | |
824 | |
10743 | 825 card->regs.beshiscal = ifactor<<2; |
826 card->regs.beshsrcst = (ofsleft*ifactor)<<2; | |
827 card->regs.beshsrcend = card->regs.beshsrcst + (((dw - ofsleft - 1) * ifactor) << 2); | |
1 | 828 |
829 //Setup vertical scaling | |
830 ifactor = ((sh-1)<<14)/(dh-1); | |
831 ofstop = bestop - y; | |
832 | |
10743 | 833 card->regs.besviscal = ifactor<<2; |
1 | 834 |
10743 | 835 baseadrofs = ( (ofstop * card->regs.besviscal) >>16) * card->regs.bespitch; |
57 | 836 //frame_size = ((sw + 31) & ~31) * sh + (((sw + 31) & ~31) * sh) / 2; |
10743 | 837 card->regs.besa1org = (uint32_t) card->src_base + baseadrofs; |
838 card->regs.besa2org = (uint32_t) card->src_base + baseadrofs + 1*frame_size; | |
839 card->regs.besb1org = (uint32_t) card->src_base + baseadrofs + 2*frame_size; | |
840 card->regs.besb2org = (uint32_t) card->src_base + baseadrofs + 3*frame_size; | |
1 | 841 |
470 | 842 if(config->format==MGA_VID_FORMAT_YV12 |
843 ||config->format==MGA_VID_FORMAT_IYUV | |
844 ||config->format==MGA_VID_FORMAT_I420 | |
845 ){ | |
57 | 846 // planar YUV frames: |
10743 | 847 if (card->is_g400) |
848 baseadrofs = ( ( (ofstop * card->regs.besviscal ) / 4 ) >> 16 ) * card->regs.bespitch; | |
1 | 849 else |
10743 | 850 baseadrofs = ( ( ( ofstop * card->regs.besviscal ) / 2 ) >> 16 ) * card->regs.bespitch; |
1 | 851 |
10743 | 852 if(config->format==MGA_VID_FORMAT_YV12 || !card->is_g400){ |
853 card->regs.besa1corg = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ; | |
854 card->regs.besa2corg = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh; | |
855 card->regs.besb1corg = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh; | |
856 card->regs.besb2corg = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh; | |
857 card->regs.besa1c3org = card->regs.besa1corg + ( (card->regs.bespitch * sh) / 4); | |
858 card->regs.besa2c3org = card->regs.besa2corg + ( (card->regs.bespitch * sh) / 4); | |
859 card->regs.besb1c3org = card->regs.besb1corg + ( (card->regs.bespitch * sh) / 4); | |
860 card->regs.besb2c3org = card->regs.besb2corg + ( (card->regs.bespitch * sh) / 4); | |
470 | 861 } else { |
10743 | 862 card->regs.besa1c3org = (uint32_t) card->src_base + baseadrofs + card->regs.bespitch * sh ; |
863 card->regs.besa2c3org = (uint32_t) card->src_base + baseadrofs + 1*frame_size + card->regs.bespitch * sh; | |
864 card->regs.besb1c3org = (uint32_t) card->src_base + baseadrofs + 2*frame_size + card->regs.bespitch * sh; | |
865 card->regs.besb2c3org = (uint32_t) card->src_base + baseadrofs + 3*frame_size + card->regs.bespitch * sh; | |
866 card->regs.besa1corg = card->regs.besa1c3org + ((card->regs.bespitch * sh) / 4); | |
867 card->regs.besa2corg = card->regs.besa2c3org + ((card->regs.bespitch * sh) / 4); | |
868 card->regs.besb1corg = card->regs.besb1c3org + ((card->regs.bespitch * sh) / 4); | |
869 card->regs.besb2corg = card->regs.besb2c3org + ((card->regs.bespitch * sh) / 4); | |
470 | 870 } |
871 | |
57 | 872 } |
1 | 873 |
10743 | 874 weight = ofstop * (card->regs.besviscal >> 2); |
1 | 875 weights = weight < 0 ? 1 : 0; |
10743 | 876 card->regs.besv2wght = card->regs.besv1wght = (weights << 16) + ((weight & 0x3FFF) << 2); |
877 card->regs.besv2srclst = card->regs.besv1srclst = sh - 1 - (((ofstop * card->regs.besviscal) >> 16) & 0x03FF); | |
1 | 878 |
2344 | 879 #ifdef CRTC2 |
880 // pridat hlavni registry - tj. casovani ... | |
881 | |
882 | |
883 switch(config->format){ | |
884 case MGA_VID_FORMAT_YV12: | |
885 case MGA_VID_FORMAT_I420: | |
886 case MGA_VID_FORMAT_IYUV: | |
10743 | 887 card->cregs.c2ctl = 1 // CRTC2 enabled |
2344 | 888 + (1<<1) // external clock |
889 + (0<<2) // external clock | |
890 + (1<<3) // pixel clock enable - not needed ??? | |
891 + (0<<4) // high prioryty req | |
892 + (1<<5) // high prioryty req | |
893 + (0<<6) // high prioryty req | |
894 + (1<<8) // high prioryty req max | |
895 + (0<<9) // high prioryty req max | |
896 + (0<<10) // high prioryty req max | |
897 + (0<<20) // CRTC1 to DAC | |
898 + (1<<21) // 420 mode | |
899 + (1<<22) // 420 mode | |
900 + (1<<23) // 420 mode | |
901 + (0<<24) // single chroma line for 420 mode - need to be corrected | |
902 + (0<<25) /*/ interlace mode - need to be corrected*/ | |
903 + (0<<26) // field legth polariry | |
904 + (0<<27) // field identification polariry | |
905 + (1<<28) // VIDRST detection mode | |
906 + (0<<29) // VIDRST detection mode | |
907 + (1<<30) // Horizontal counter preload | |
908 + (1<<31) // Vertical counter preload | |
909 ; | |
10743 | 910 card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode |
2344 | 911 + (1<<1) // Y filter enable |
912 + (1<<2) // CbCr filter enable | |
913 + (0<<3) // subpicture enable (disabled) | |
914 + (0<<4) // NTSC enable (disabled - PAL) | |
915 + (0<<5) // C2 static subpicture enable (disabled) | |
916 + (0<<6) // C2 subpicture offset division (disabled) | |
917 + (0<<7) // 422 subformat selection ! | |
918 /* + (0<<8) // 15 bpp high alpha | |
919 + (0<<9) // 15 bpp high alpha | |
920 + (0<<10) // 15 bpp high alpha | |
921 + (0<<11) // 15 bpp high alpha | |
922 + (0<<12) // 15 bpp high alpha | |
923 + (0<<13) // 15 bpp high alpha | |
924 + (0<<14) // 15 bpp high alpha | |
925 + (0<<15) // 15 bpp high alpha | |
926 + (0<<16) // 15 bpp low alpha | |
927 + (0<<17) // 15 bpp low alpha | |
928 + (0<<18) // 15 bpp low alpha | |
929 + (0<<19) // 15 bpp low alpha | |
930 + (0<<20) // 15 bpp low alpha | |
931 + (0<<21) // 15 bpp low alpha | |
932 + (0<<22) // 15 bpp low alpha | |
933 + (0<<23) // 15 bpp low alpha | |
934 + (0<<24) // static subpicture key | |
935 + (0<<25) // static subpicture key | |
936 + (0<<26) // static subpicture key | |
937 + (0<<27) // static subpicture key | |
938 + (0<<28) // static subpicture key | |
939 */ ; | |
940 break; | |
941 | |
942 case MGA_VID_FORMAT_YUY2: | |
10743 | 943 card->cregs.c2ctl = 1 // CRTC2 enabled |
2344 | 944 + (1<<1) // external clock |
945 + (0<<2) // external clock | |
946 + (1<<3) // pixel clock enable - not needed ??? | |
947 + (0<<4) // high prioryty req - acc to spec | |
948 + (1<<5) // high prioryty req | |
949 + (0<<6) // high prioryty req | |
950 // 7 reserved | |
951 + (1<<8) // high prioryty req max | |
952 + (0<<9) // high prioryty req max | |
953 + (0<<10) // high prioryty req max | |
954 // 11-19 reserved | |
955 + (0<<20) // CRTC1 to DAC | |
956 + (1<<21) // 422 mode | |
957 + (0<<22) // 422 mode | |
958 + (1<<23) // 422 mode | |
959 + (0<<24) // single chroma line for 420 mode - need to be corrected | |
960 + (0<<25) /*/ interlace mode - need to be corrected*/ | |
961 + (0<<26) // field legth polariry | |
962 + (0<<27) // field identification polariry | |
963 + (1<<28) // VIDRST detection mode | |
964 + (0<<29) // VIDRST detection mode | |
965 + (1<<30) // Horizontal counter preload | |
966 + (1<<31) // Vertical counter preload | |
967 ; | |
10743 | 968 card->cregs.c2datactl = 1 // disable dither - propably not needed, we are already in YUV mode |
2344 | 969 + (1<<1) // Y filter enable |
970 + (1<<2) // CbCr filter enable | |
971 + (0<<3) // subpicture enable (disabled) | |
972 + (0<<4) // NTSC enable (disabled - PAL) | |
973 + (0<<5) // C2 static subpicture enable (disabled) | |
974 + (0<<6) // C2 subpicture offset division (disabled) | |
975 + (0<<7) // 422 subformat selection ! | |
976 /* + (0<<8) // 15 bpp high alpha | |
977 + (0<<9) // 15 bpp high alpha | |
978 + (0<<10) // 15 bpp high alpha | |
979 + (0<<11) // 15 bpp high alpha | |
980 + (0<<12) // 15 bpp high alpha | |
981 + (0<<13) // 15 bpp high alpha | |
982 + (0<<14) // 15 bpp high alpha | |
983 + (0<<15) // 15 bpp high alpha | |
984 + (0<<16) // 15 bpp low alpha | |
985 + (0<<17) // 15 bpp low alpha | |
986 + (0<<18) // 15 bpp low alpha | |
987 + (0<<19) // 15 bpp low alpha | |
988 + (0<<20) // 15 bpp low alpha | |
989 + (0<<21) // 15 bpp low alpha | |
990 + (0<<22) // 15 bpp low alpha | |
991 + (0<<23) // 15 bpp low alpha | |
992 + (0<<24) // static subpicture key | |
993 + (0<<25) // static subpicture key | |
994 + (0<<26) // static subpicture key | |
995 + (0<<27) // static subpicture key | |
996 + (0<<28) // static subpicture key | |
997 */ ; | |
998 break; | |
999 | |
1000 case MGA_VID_FORMAT_UYVY: | |
10743 | 1001 card->cregs.c2ctl = 1 // CRTC2 enabled |
2344 | 1002 + (1<<1) // external clock |
1003 + (0<<2) // external clock | |
1004 + (1<<3) // pixel clock enable - not needed ??? | |
1005 + (0<<4) // high prioryty req | |
1006 + (1<<5) // high prioryty req | |
1007 + (0<<6) // high prioryty req | |
1008 + (1<<8) // high prioryty req max | |
1009 + (0<<9) // high prioryty req max | |
1010 + (0<<10) // high prioryty req max | |
1011 + (0<<20) // CRTC1 to DAC | |
1012 + (1<<21) // 422 mode | |
1013 + (0<<22) // 422 mode | |
1014 + (1<<23) // 422 mode | |
1015 + (1<<24) // single chroma line for 420 mode - need to be corrected | |
1016 + (1<<25) /*/ interlace mode - need to be corrected*/ | |
1017 + (0<<26) // field legth polariry | |
1018 + (0<<27) // field identification polariry | |
1019 + (1<<28) // VIDRST detection mode | |
1020 + (0<<29) // VIDRST detection mode | |
1021 + (1<<30) // Horizontal counter preload | |
1022 + (1<<31) // Vertical counter preload | |
1023 ; | |
10743 | 1024 card->cregs.c2datactl = 0 // enable dither - propably not needed, we are already in YUV mode |
2344 | 1025 + (1<<1) // Y filter enable |
1026 + (1<<2) // CbCr filter enable | |
1027 + (0<<3) // subpicture enable (disabled) | |
1028 + (0<<4) // NTSC enable (disabled - PAL) | |
1029 + (0<<5) // C2 static subpicture enable (disabled) | |
1030 + (0<<6) // C2 subpicture offset division (disabled) | |
1031 + (1<<7) // 422 subformat selection ! | |
1032 /* + (0<<8) // 15 bpp high alpha | |
1033 + (0<<9) // 15 bpp high alpha | |
1034 + (0<<10) // 15 bpp high alpha | |
1035 + (0<<11) // 15 bpp high alpha | |
1036 + (0<<12) // 15 bpp high alpha | |
1037 + (0<<13) // 15 bpp high alpha | |
1038 + (0<<14) // 15 bpp high alpha | |
1039 + (0<<15) // 15 bpp high alpha | |
1040 + (0<<16) // 15 bpp low alpha | |
1041 + (0<<17) // 15 bpp low alpha | |
1042 + (0<<18) // 15 bpp low alpha | |
1043 + (0<<19) // 15 bpp low alpha | |
1044 + (0<<20) // 15 bpp low alpha | |
1045 + (0<<21) // 15 bpp low alpha | |
1046 + (0<<22) // 15 bpp low alpha | |
1047 + (0<<23) // 15 bpp low alpha | |
1048 + (0<<24) // static subpicture key | |
1049 + (0<<25) // static subpicture key | |
1050 + (0<<26) // static subpicture key | |
1051 + (0<<27) // static subpicture key | |
1052 + (0<<28) // static subpicture key | |
1053 */ ; | |
1054 break; | |
1055 | |
1056 default: | |
1057 printk(KERN_ERR "mga_vid: Unsupported pixel format: 0x%X\n",config->format); | |
1058 return -1; | |
1059 } | |
1060 | |
10743 | 1061 card->cregs.c2hparam = ( (hdispend - 8) << 16) | (htotal - 8); |
1062 card->cregs.c2hsync = ( (hsyncend - 8) << 16) | (hsyncstart - 8); | |
2344 | 1063 |
10743 | 1064 card->cregs.c2misc=0 // CRTCV2 656 togg f0 |
2344 | 1065 +(0<<1) // CRTCV2 656 togg f0 |
1066 +(0<<2) // CRTCV2 656 togg f0 | |
1067 +(0<<4) // CRTCV2 656 togg f1 | |
1068 +(0<<5) // CRTCV2 656 togg f1 | |
1069 +(0<<6) // CRTCV2 656 togg f1 | |
1070 +(0<<8) // Hsync active high | |
1071 +(0<<9) // Vsync active high | |
1072 // 16-27 c2vlinecomp - nevim co tam dat | |
1073 ; | |
10743 | 1074 card->cregs.c2offset=(card->regs.bespitch << 1); |
2344 | 1075 |
10743 | 1076 card->cregs.c2pl2startadd0=card->regs.besa1corg; |
1077 // card->cregs.c2pl2startadd1=card->regs.besa2corg; | |
1078 card->cregs.c2pl3startadd0=card->regs.besa1c3org; | |
1079 // card->cregs.c2pl3startadd1=card->regs.besa2c3org; | |
2344 | 1080 |
10743 | 1081 card->cregs.c2preload=(vsyncstart << 16) | (hsyncstart); // from |
2344 | 1082 |
10743 | 1083 card->cregs.c2spicstartadd0=0; // not used |
1084 // card->cregs.c2spicstartadd1=0; // not used | |
2344 | 1085 |
10743 | 1086 card->cregs.c2startadd0=card->regs.besa1org; |
1087 // card->cregs.c2startadd1=card->regs.besa2org; | |
2344 | 1088 |
10743 | 1089 card->cregs.c2subpiclut=0; //not used |
2344 | 1090 |
10743 | 1091 card->cregs.c2vparam = ( (vdispend - 1) << 16) | (vtotal - 1); |
1092 card->cregs.c2vsync = ( (vsyncend - 1) << 16) | (vsyncstart - 1); | |
2344 | 1093 |
1094 | |
1095 #endif | |
1096 | |
10743 | 1097 mga_vid_write_regs(card, 0); |
1 | 1098 return 0; |
1099 } | |
1100 | |
68 | 1101 #ifdef MGA_ALLOW_IRQ |
1102 | |
10743 | 1103 static void enable_irq(mga_card_t * card){ |
48 | 1104 long int cc; |
1105 | |
10743 | 1106 cc = readl(card->mmio_base + IEN); |
63 | 1107 // printk(KERN_ALERT "*** !!! IRQREG = %d\n", (int)(cc&0xff)); |
48 | 1108 |
10743 | 1109 writeb(0x11, card->mmio_base + CRTCX); |
48 | 1110 |
10743 | 1111 writeb(0x20, card->mmio_base + CRTCD); /* clear 0, enable off */ |
1112 writeb(0x00, card->mmio_base + CRTCD); /* enable on */ | |
1113 writeb(0x10, card->mmio_base + CRTCD); /* clear = 1 */ | |
48 | 1114 |
10743 | 1115 writel(card->regs.besglobctl , card->mmio_base + BESGLOBCTL); |
48 | 1116 |
1117 } | |
1118 | |
10743 | 1119 static void disable_irq(mga_card_t * card){ |
48 | 1120 |
10743 | 1121 writeb(0x11, card->mmio_base + CRTCX); |
1122 writeb(0x20, card->mmio_base + CRTCD); /* clear 0, enable off */ | |
48 | 1123 |
1124 } | |
1125 | |
5884 | 1126 static void mga_handle_irq(int irq, void *dev_id, struct pt_regs *pregs) { |
48 | 1127 // static int frame=0; |
854
76ca00724e12
gcc warnings fixed - patch by Aelius aelius@wish.net
arpi_esp
parents:
662
diff
changeset
|
1128 // static int counter=0; |
48 | 1129 long int cc; |
10743 | 1130 mga_card_t * card = dev_id; |
48 | 1131 |
68 | 1132 // printk(KERN_DEBUG "vcount = %d\n",readl(mga_mmio_base + VCOUNT)); |
1133 | |
48 | 1134 //printk("mga_interrupt #%d\n", irq); |
1135 | |
10743 | 1136 // check whether the interrupt is really for us (irq sharing) |
48 | 1137 if ( irq != -1 ) { |
10743 | 1138 cc = readl(card->mmio_base + STATUS); |
48 | 1139 if ( ! (cc & 0x10) ) return; /* vsyncpen */ |
1140 // debug_irqcnt++; | |
1141 } | |
1142 | |
1143 // if ( debug_irqignore ) { | |
1144 // debug_irqignore = 0; | |
1145 | |
1146 // frame=(frame+1)&1; | |
10743 | 1147 card->regs.besctl = (card->regs.besctl & ~0x07000000) + (card->next_frame << 25); |
1148 writel( card->regs.besctl, card->mmio_base + BESCTL ); | |
2344 | 1149 |
1150 #ifdef CRTC2 | |
1151 // sem pridat vyber obrazku !!!! | |
10743 | 1152 // i han echt kei ahnig was das obe heisse söll |
1153 crtc2_frame_sel(card->next_frame); | |
2344 | 1154 #endif |
48 | 1155 |
1156 #if 0 | |
1157 ++counter; | |
1158 if(!(counter&63)){ | |
1159 printk("mga irq counter = %d\n",counter); | |
1160 } | |
1161 #endif | |
1162 | |
1163 // } else { | |
1164 // debug_irqignore = 1; | |
1165 // } | |
1166 | |
1167 if ( irq != -1 ) { | |
10743 | 1168 writeb( 0x11, card->mmio_base + CRTCX); |
1169 writeb( 0, card->mmio_base + CRTCD ); | |
1170 writeb( 0x10, card->mmio_base + CRTCD ); | |
48 | 1171 } |
1172 | |
10743 | 1173 // writel( card->regs.besglobctl, card->mmio_base + BESGLOBCTL); |
48 | 1174 |
1175 | |
1176 return; | |
1177 | |
1178 } | |
1179 | |
68 | 1180 #endif |
1 | 1181 |
1182 static int mga_vid_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) | |
1183 { | |
10743 | 1184 int frame, result; |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1185 uint32_t tmp; |
10743 | 1186 mga_card_t * card = (mga_card_t *) file->private_data; |
1 | 1187 |
1188 switch(cmd) | |
1189 { | |
1190 case MGA_VID_CONFIG: | |
1191 //FIXME remove | |
10743 | 1192 // printk(KERN_DEBUG "mga_vid: vcount = %d\n",readl(card->mmio_base + VCOUNT)); |
5623 | 1193 #ifdef MP_DEBUG |
10743 | 1194 printk(KERN_DEBUG "mga_vid: mmio_base = %p\n",card->mmio_base); |
1195 printk(KERN_DEBUG "mga_vid: mem_base = %08x\n",card->mem_base); | |
1 | 1196 //FIXME remove |
1197 | |
61 | 1198 printk(KERN_DEBUG "mga_vid: Received configuration\n"); |
5623 | 1199 #endif |
1 | 1200 |
10743 | 1201 if(copy_from_user(&card->config,(mga_vid_config_t*) arg,sizeof(mga_vid_config_t))) |
1 | 1202 { |
61 | 1203 printk(KERN_ERR "mga_vid: failed copy from userspace\n"); |
1 | 1204 return(-EFAULT); |
1205 } | |
10743 | 1206 if(card->config.version != MGA_VID_VERSION){ |
1207 printk(KERN_ERR "mga_vid: incompatible version! driver: %X requested: %X\n",MGA_VID_VERSION,card->config.version); | |
57 | 1208 return(-EFAULT); |
1209 } | |
1210 | |
10743 | 1211 if(card->config.frame_size==0 || card->config.frame_size>1024*768*2){ |
1212 printk(KERN_ERR "mga_vid: illegal frame_size: %d\n",card->config.frame_size); | |
57 | 1213 return(-EFAULT); |
1214 } | |
1215 | |
10743 | 1216 if(card->config.num_frames<1 || card->config.num_frames>4){ |
1217 printk(KERN_ERR "mga_vid: illegal num_frames: %d\n",card->config.num_frames); | |
57 | 1218 return(-EFAULT); |
1219 } | |
1220 | |
10743 | 1221 card->src_base = (card->ram_size * 0x100000 - card->config.num_frames * card->config.frame_size - card->top_reserved); |
1222 if(card->src_base<0){ | |
61 | 1223 printk(KERN_ERR "mga_vid: not enough memory for frames!\n"); |
57 | 1224 return(-EFAULT); |
1225 } | |
10743 | 1226 card->src_base &= (~0xFFFF); // 64k boundary |
5623 | 1227 #ifdef MP_DEBUG |
10743 | 1228 printk(KERN_DEBUG "mga YUV buffer base: 0x%X\n", card->src_base); |
5623 | 1229 #endif |
57 | 1230 |
10743 | 1231 if (card->is_g400) |
1232 card->config.card_type = MGA_G400; | |
1 | 1233 else |
10743 | 1234 card->config.card_type = MGA_G200; |
1 | 1235 |
10743 | 1236 card->config.ram_size = card->ram_size; |
1 | 1237 |
10743 | 1238 if (copy_to_user((mga_vid_config_t *) arg, &card->config, sizeof(mga_vid_config_t))) |
1 | 1239 { |
61 | 1240 printk(KERN_ERR "mga_vid: failed copy to userspace\n"); |
1 | 1241 return(-EFAULT); |
1242 } | |
10743 | 1243 |
1244 result = mga_vid_set_config(card); | |
1245 if(!result) card->configured=1; | |
1246 return result; | |
1 | 1247 break; |
1248 | |
1249 case MGA_VID_ON: | |
5623 | 1250 #ifdef MP_DEBUG |
61 | 1251 printk(KERN_DEBUG "mga_vid: Video ON\n"); |
5623 | 1252 #endif |
10743 | 1253 card->vid_src_ready = 1; |
1254 if(card->vid_overlay_on) | |
1 | 1255 { |
10743 | 1256 card->regs.besctl |= 1; |
1257 mga_vid_write_regs(card, 0); | |
1 | 1258 } |
68 | 1259 #ifdef MGA_ALLOW_IRQ |
10743 | 1260 if ( card->irq != -1 ) enable_irq(card); |
68 | 1261 #endif |
10743 | 1262 card->next_frame=0; |
1 | 1263 break; |
1264 | |
1265 case MGA_VID_OFF: | |
5623 | 1266 #ifdef MP_DEBUG |
94
fbd99740af99
printk() message for video off when releasing mga without ioctl()
lgb
parents:
93
diff
changeset
|
1267 printk(KERN_DEBUG "mga_vid: Video OFF (ioctl)\n"); |
5623 | 1268 #endif |
10743 | 1269 card->vid_src_ready = 0; |
68 | 1270 #ifdef MGA_ALLOW_IRQ |
10743 | 1271 if ( card->irq != -1 ) disable_irq(card); |
68 | 1272 #endif |
10743 | 1273 card->regs.besctl &= ~1; |
1274 card->regs.besglobctl &= ~(1<<6); // UYVY format selected | |
1275 mga_vid_write_regs(card, 0); | |
1 | 1276 break; |
1277 | |
1278 case MGA_VID_FSEL: | |
1279 if(copy_from_user(&frame,(int *) arg,sizeof(int))) | |
1280 { | |
61 | 1281 printk(KERN_ERR "mga_vid: FSEL failed copy from userspace\n"); |
1 | 1282 return(-EFAULT); |
1283 } | |
1284 | |
10743 | 1285 mga_vid_frame_sel(card, frame); |
1 | 1286 break; |
1287 | |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1288 case MGA_VID_GET_LUMA: |
10743 | 1289 //tmp = card->regs.beslumactl; |
6798 | 1290 //tmp = (tmp&0xFFFF0000) | (((tmp&0xFFFF) - 0x80)&0xFFFF); |
10743 | 1291 tmp = (card->brightness << 16) | (card->contrast&0xFFFF); |
6798 | 1292 |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1293 if (copy_to_user((uint32_t *) arg, &tmp, sizeof(uint32_t))) |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1294 { |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1295 printk(KERN_ERR "mga_vid: failed copy %p to userspace %p\n", |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1296 &tmp, (uint32_t *) arg); |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1297 return(-EFAULT); |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1298 } |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1299 break; |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1300 |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1301 case MGA_VID_SET_LUMA: |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1302 tmp = arg; |
10743 | 1303 card->brightness=tmp>>16; card->contrast=tmp&0xFFFF; |
1304 //card->regs.beslumactl = (tmp&0xFFFF0000) | ((tmp + 0x80)&0xFFFF); | |
1305 card->regs.beslumactl = (card->brightness << 16) | ((card->contrast+0x80)&0xFFFF); | |
1306 mga_vid_write_regs(card, 0); | |
5013
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1307 break; |
52c008dd6e93
min() moved out of #if, applied brightness/contrast patch by Brian J. Murrell
arpi
parents:
4728
diff
changeset
|
1308 |
1 | 1309 default: |
61 | 1310 printk(KERN_ERR "mga_vid: Invalid ioctl\n"); |
1 | 1311 return (-EINVAL); |
1312 } | |
1313 | |
1314 return 0; | |
1315 } | |
1316 | |
10743 | 1317 static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400); |
1 | 1318 |
10743 | 1319 // returns the number of found cards |
1 | 1320 static int mga_vid_find_card(void) |
1321 { | |
1322 struct pci_dev *dev = NULL; | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1323 char *mga_dev_name; |
10743 | 1324 mga_card_t * card; |
1 | 1325 |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1326 while((dev = pci_find_device(PCI_VENDOR_ID_MATROX, PCI_ANY_ID, dev))) |
1989 | 1327 { |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1328 mga_dev_name = ""; |
10743 | 1329 mga_cards_num++; |
1330 if(mga_cards_num == MGA_MAX_CARDS) | |
1331 { | |
1332 printk(KERN_WARNING "mga_vid: Trying to initialize more than %d cards\n",MGA_MAX_CARDS); | |
1333 mga_cards_num--; | |
1334 break; | |
1335 } | |
1336 | |
1337 card = kmalloc(sizeof(mga_card_t), GFP_KERNEL); | |
1338 if(!card) | |
1339 { | |
1340 printk(KERN_ERR "mga_vid: memory allocation failed\n"); | |
1341 mga_cards_num--; | |
1342 break; | |
1343 } | |
1344 | |
1345 mga_cards[mga_cards_num - 1] = card; | |
1346 | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1347 switch(dev->device) { |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1348 case PCI_DEVICE_ID_MATROX_G550: |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1349 mga_dev_name = "MGA G550"; |
10743 | 1350 printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); |
1351 cards_init(card, dev, mga_cards_num - 1, 1); | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1352 break; |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1353 case PCI_DEVICE_ID_MATROX_G400: |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1354 mga_dev_name = "MGA G400/G450"; |
10743 | 1355 printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); |
1356 cards_init(card, dev, mga_cards_num - 1, 1); | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1357 break; |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1358 case PCI_DEVICE_ID_MATROX_G200_AGP: |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1359 mga_dev_name = "MGA G200 AGP"; |
10743 | 1360 printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); |
1361 cards_init(card, dev, mga_cards_num - 1, 0); | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1362 break; |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1363 case PCI_DEVICE_ID_MATROX_G200_PCI: |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1364 mga_dev_name = "MGA G200"; |
10743 | 1365 printk(KERN_INFO "mga_vid: Found %s at %s [%s]\n", mga_dev_name, dev->slot_name, dev->name); |
1366 cards_init(card, dev, mga_cards_num - 1, 0); | |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1367 break; |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1368 default: |
10743 | 1369 mga_cards_num--; |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1370 printk(KERN_INFO "mga_vid: ignoring matrox device (%d) at %s [%s]\n", dev->device, dev->slot_name, dev->name); |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1371 break; |
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1372 } |
1 | 1373 } |
9631
d0b7a6b898c8
multiple mga device support by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9518
diff
changeset
|
1374 |
10743 | 1375 if(!mga_cards_num) |
1 | 1376 { |
10743 | 1377 printk(KERN_ERR "mga_vid: No supported cards found\n"); |
91 | 1378 } else { |
10743 | 1379 printk(KERN_INFO "mga_vid: %d supported cards found\n", mga_cards_num); |
48 | 1380 } |
10743 | 1381 |
1382 return mga_cards_num; | |
1 | 1383 } |
1384 | |
10743 | 1385 static void mga_param_buff_fill( mga_card_t * card ) |
4484 | 1386 { |
1387 unsigned len; | |
10743 | 1388 unsigned size = card->param_buff_size; |
1389 char * buf = card->param_buff; | |
4484 | 1390 len = 0; |
10743 | 1391 len += snprintf(&buf[len],size-len,"Interface version: %04X\n",MGA_VID_VERSION); |
1392 len += snprintf(&buf[len],size-len,"Memory: %x:%dM\n",card->mem_base,(unsigned int) card->ram_size); | |
1393 len += snprintf(&buf[len],size-len,"MMIO: %p\n",card->mmio_base); | |
1394 len += snprintf(&buf[len],size-len,"Configurable stuff:\n"); | |
1395 len += snprintf(&buf[len],size-len,"~~~~~~~~~~~~~~~~~~~\n"); | |
1396 len += snprintf(&buf[len],size-len,PARAM_BRIGHTNESS"%d\n",card->brightness); | |
1397 len += snprintf(&buf[len],size-len,PARAM_CONTRAST"%d\n",card->contrast); | |
1398 len += snprintf(&buf[len],size-len,PARAM_BLACKIE"%s\n",card->regs.blackie?"on":"off"); | |
1399 card->param_buff_len = len; | |
4527 | 1400 // check boundaries of mga_param_buff before writing to it!!! |
4484 | 1401 } |
1402 | |
1 | 1403 |
1404 static ssize_t mga_vid_read(struct file *file, char *buf, size_t count, loff_t *ppos) | |
1405 { | |
4484 | 1406 uint32_t size; |
10743 | 1407 mga_card_t * card = (mga_card_t *) file->private_data; |
1408 | |
1409 if(!card->param_buff) return -ESPIPE; | |
1410 if(!(*ppos)) mga_param_buff_fill(card); | |
1411 if(*ppos >= card->param_buff_len) return 0; | |
1412 size = min(count,card->param_buff_len-(uint32_t)(*ppos)); | |
1413 memcpy(buf,card->param_buff,size); | |
4484 | 1414 *ppos += size; |
1415 return size; | |
1 | 1416 } |
1417 | |
1418 static ssize_t mga_vid_write(struct file *file, const char *buf, size_t count, loff_t *ppos) | |
1419 { | |
10743 | 1420 mga_card_t * card = (mga_card_t *) file->private_data; |
1421 | |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1422 if(memcmp(buf,PARAM_BRIGHTNESS,min(count,strlen(PARAM_BRIGHTNESS))) == 0) |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1423 { |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1424 short brightness; |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1425 brightness=simple_strtol(&buf[strlen(PARAM_BRIGHTNESS)],NULL,10); |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1426 if (brightness>127 || brightness<-128) { brightness=0;} |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1427 // printk(KERN_DEBUG "mga_vid: brightness modified ( %d ) \n",brightness); |
10743 | 1428 card->brightness=brightness; |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1429 } else |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1430 if(memcmp(buf,PARAM_CONTRAST,min(count,strlen(PARAM_CONTRAST))) == 0) |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1431 { |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1432 short contrast; |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1433 contrast=simple_strtol(&buf[strlen(PARAM_CONTRAST)],NULL,10); |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1434 if (contrast>127 || contrast<-128) { contrast=0;} |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1435 // printk(KERN_DEBUG "mga_vid: contrast modified ( %d ) \n",contrast); |
10743 | 1436 card->contrast=contrast; |
4487
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1437 } else |
e642ff2d5c6d
Attila's Linux 2.2 patch, and contrast control applied
eyck
parents:
4484
diff
changeset
|
1438 |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1439 if(memcmp(buf,PARAM_BLACKIE,min(count,strlen(PARAM_BLACKIE))) == 0) |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1440 { |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1441 short blackie; |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1442 blackie=simple_strtol(&buf[strlen(PARAM_BLACKIE)],NULL,10); |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1443 // printk(KERN_DEBUG "mga_vid: shadow mode: ( %d ) \n",blackie); |
10743 | 1444 card->regs.blackie=(blackie>0)?1:0; |
4483
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1445 } else count = -EIO; |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1446 // TODO: reset settings |
fb4b914eab8a
framework for settings modifications like in radeon_vid ( /dev/mga_vid can
eyck
parents:
3959
diff
changeset
|
1447 return count; |
1 | 1448 } |
1449 | |
1450 static int mga_vid_mmap(struct file *file, struct vm_area_struct *vma) | |
1451 { | |
10743 | 1452 mga_card_t * card = (mga_card_t *) file->private_data; |
1 | 1453 |
5623 | 1454 #ifdef MP_DEBUG |
61 | 1455 printk(KERN_DEBUG "mga_vid: mapping video memory into userspace\n"); |
5623 | 1456 #endif |
10743 | 1457 |
1458 if(!card->configured) | |
1459 { | |
1460 printk(KERN_ERR "mga_vid: card is not configured, cannot mmap\n"); | |
1461 return(-EAGAIN); | |
1462 } | |
1463 | |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1464 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,3) |
10743 | 1465 if(remap_page_range(vma, vma->vm_start, card->mem_base + card->src_base, |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1466 vma->vm_end - vma->vm_start, vma->vm_page_prot)) |
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1467 #else |
10743 | 1468 if(remap_page_range(vma->vm_start, card->mem_base + card->src_base, |
1 | 1469 vma->vm_end - vma->vm_start, vma->vm_page_prot)) |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1470 #endif |
1 | 1471 { |
63 | 1472 printk(KERN_ERR "mga_vid: error mapping video memory\n"); |
1 | 1473 return(-EAGAIN); |
1474 } | |
1475 | |
1476 return(0); | |
1477 } | |
1478 | |
1479 static int mga_vid_release(struct inode *inode, struct file *file) | |
1480 { | |
10743 | 1481 mga_card_t * card; |
1482 | |
1 | 1483 //Close the window just in case |
5623 | 1484 #ifdef MP_DEBUG |
94
fbd99740af99
printk() message for video off when releasing mga without ioctl()
lgb
parents:
93
diff
changeset
|
1485 printk(KERN_DEBUG "mga_vid: Video OFF (release)\n"); |
5623 | 1486 #endif |
94
fbd99740af99
printk() message for video off when releasing mga without ioctl()
lgb
parents:
93
diff
changeset
|
1487 |
10743 | 1488 card = (mga_card_t *) file->private_data; |
1489 | |
1490 card->vid_src_ready = 0; | |
1491 card->regs.besctl &= ~1; | |
1492 card->regs.besglobctl &= ~(1<<6); // UYVY format selected | |
1493 // card->config.colkey_on=0; //!!! | |
1494 mga_vid_write_regs(card, 1); | |
1495 card->vid_in_use = 0; | |
1 | 1496 |
93 | 1497 MOD_DEC_USE_COUNT; |
1 | 1498 return 0; |
1499 } | |
1500 | |
1501 static long long mga_vid_lseek(struct file *file, long long offset, int origin) | |
1502 { | |
1503 return -ESPIPE; | |
1504 } | |
1505 | |
1506 static int mga_vid_open(struct inode *inode, struct file *file) | |
1507 { | |
10743 | 1508 mga_card_t * card; |
1509 | |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1510 #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,2) |
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1511 int minor = MINOR(inode->i_rdev.value); |
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1512 #else |
1 | 1513 int minor = MINOR(inode->i_rdev); |
6586
df10f81f1bfc
linux-2.5.x support patch by Sytse Wielinga <s.b.wieling at student.utwente.nl>
alex
parents:
6086
diff
changeset
|
1514 #endif |
1 | 1515 |
10743 | 1516 if(!file->private_data) |
1517 { | |
1518 // we are not using devfs, use the minor | |
1519 // number to specify the card we are using | |
1520 | |
11000 | 1521 // we don't have that many cards |
10743 | 1522 if(minor >= mga_cards_num) |
1523 return(-ENXIO); | |
1 | 1524 |
10743 | 1525 file->private_data = mga_cards[minor]; |
1526 #ifdef MP_DEBUG | |
1527 printk(KERN_DEBUG "mga_vid: Not using devfs\n"); | |
1528 #endif | |
1529 } | |
1530 #ifdef MP_DEBUG | |
1531 else { | |
1532 printk(KERN_DEBUG "mga_vid: Using devfs\n"); | |
1533 } | |
1534 #endif | |
1535 | |
1536 card = (mga_card_t *) file->private_data; | |
1537 | |
1538 if(card->vid_in_use == 1) | |
1 | 1539 return(-EBUSY); |
1540 | |
10743 | 1541 card->vid_in_use = 1; |
93 | 1542 MOD_INC_USE_COUNT; |
1 | 1543 return(0); |
1544 } | |
1545 | |
1546 #if LINUX_VERSION_CODE >= 0x020400 | |
1547 static struct file_operations mga_vid_fops = | |
1548 { | |
1549 llseek: mga_vid_lseek, | |
1550 read: mga_vid_read, | |
1551 write: mga_vid_write, | |
1552 ioctl: mga_vid_ioctl, | |
1553 mmap: mga_vid_mmap, | |
1554 open: mga_vid_open, | |
1555 release: mga_vid_release | |
1556 }; | |
1557 #else | |
1558 static struct file_operations mga_vid_fops = | |
1559 { | |
1560 mga_vid_lseek, | |
1561 mga_vid_read, | |
1562 mga_vid_write, | |
1563 NULL, | |
1564 NULL, | |
1565 mga_vid_ioctl, | |
1566 mga_vid_mmap, | |
1567 mga_vid_open, | |
1568 NULL, | |
1569 mga_vid_release | |
1570 }; | |
1571 #endif | |
1572 | |
10743 | 1573 static void cards_init(mga_card_t * card, struct pci_dev * dev, int card_number, int is_g400) |
1574 { | |
1575 unsigned int card_option; | |
1576 // temp buffer for device filename creation used only by devfs | |
1577 #ifdef CONFIG_DEVFS_FS | |
1578 char buffer[16]; | |
1579 #endif | |
1580 | |
1581 memset(card,0,sizeof(mga_card_t)); | |
1582 card->irq = -1; | |
1583 | |
1584 card->pci_dev = dev; | |
1585 card->irq = dev->irq; | |
1586 card->is_g400 = is_g400; | |
1587 | |
1588 card->param_buff = kmalloc(PARAM_BUFF_SIZE,GFP_KERNEL); | |
1589 if(card->param_buff) card->param_buff_size = PARAM_BUFF_SIZE; | |
1590 | |
1591 card->brightness = mga_brightness[card_number]; | |
1592 card->contrast = mga_contrast[card_number]; | |
1593 card->top_reserved = mga_top_reserved[card_number]; | |
1594 | |
1595 #if LINUX_VERSION_CODE >= 0x020300 | |
1596 card->mmio_base = ioremap_nocache(dev->resource[1].start,0x4000); | |
1597 card->mem_base = dev->resource[0].start; | |
1598 #else | |
1599 card->mmio_base = ioremap_nocache(dev->base_address[1] & PCI_BASE_ADDRESS_MEM_MASK,0x4000); | |
1600 card->mem_base = dev->base_address[0] & PCI_BASE_ADDRESS_MEM_MASK; | |
1601 #endif | |
1602 printk(KERN_INFO "mga_vid: MMIO at 0x%p IRQ: %d framebuffer: 0x%08X\n", card->mmio_base, card->irq, card->mem_base); | |
1603 | |
1604 pci_read_config_dword(dev, 0x40, &card_option); | |
1605 printk(KERN_INFO "mga_vid: OPTION word: 0x%08X mem: 0x%02X %s\n", card_option, | |
1606 (card_option>>10)&0x17, ((card_option>>14)&1)?"SGRAM":"SDRAM"); | |
1607 | |
1608 if (mga_ram_size[card_number]) { | |
1609 printk(KERN_INFO "mga_vid: RAMSIZE forced to %d MB\n", mga_ram_size[card_number]); | |
1610 card->ram_size=mga_ram_size[card_number]; | |
1611 } else { | |
1612 | |
1613 #ifdef MGA_MEMORY_SIZE | |
1614 card->ram_size = MGA_MEMORY_SIZE; | |
1615 printk(KERN_INFO "mga_vid: hard-coded RAMSIZE is %d MB\n", (unsigned int) card->ram_size); | |
1616 | |
1617 #else | |
1618 | |
1619 if (card->is_g400){ | |
1620 switch((card_option>>10)&0x17){ | |
1621 // SDRAM: | |
1622 case 0x00: | |
1623 case 0x04: card->ram_size = 16; break; | |
1624 case 0x03: | |
1625 case 0x05: card->ram_size = 32; break; | |
1626 // SGRAM: | |
1627 case 0x10: | |
1628 case 0x14: card->ram_size = 32; break; | |
1629 case 0x11: | |
1630 case 0x12: card->ram_size = 16; break; | |
1631 default: | |
1632 card->ram_size = 16; | |
1633 printk(KERN_INFO "mga_vid: Couldn't detect RAMSIZE, assuming 16MB!"); | |
1634 } | |
1635 /* Check for buggy 16MB cards reporting 32 MB */ | |
1636 if(card->ram_size != 16 && | |
1637 (dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SDRAM || | |
1638 dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_16MB_SGRAM || | |
1639 dev->subsystem_device == PCI_SUBSYSTEM_ID_MATROX_G400_DH_16MB)) | |
1640 { | |
1641 printk(KERN_INFO "mga_vid: Detected 16MB card reporting %d MB RAMSIZE, overriding\n", card->ram_size); | |
1642 card->ram_size = 16; | |
1643 } | |
1644 }else{ | |
1645 switch((card_option>>10)&0x17){ | |
1646 // case 0x10: | |
1647 // case 0x13: card->ram_size = 8; break; | |
1648 default: card->ram_size = 8; | |
1649 } | |
1650 } | |
1651 #if 0 | |
1652 // printk("List resources -----------\n"); | |
1653 for(temp=0;temp<DEVICE_COUNT_RESOURCE;temp++){ | |
1654 struct resource *res=&dev->resource[temp]; | |
1655 if(res->flags){ | |
1656 int size=(1+res->end-res->start)>>20; | |
1657 printk(KERN_DEBUG "res %d: start: 0x%X end: 0x%X (%d MB) flags=0x%X\n",temp,res->start,res->end,size,res->flags); | |
1658 if(res->flags&(IORESOURCE_MEM|IORESOURCE_PREFETCH)){ | |
1659 if(size>card->ram_size && size<=64) card->ram_size=size; | |
1660 } | |
1661 } | |
1662 } | |
1663 #endif | |
1664 printk(KERN_INFO "mga_vid: detected RAMSIZE is %d MB\n", (unsigned int) card->ram_size); | |
1665 #endif | |
1666 } | |
1667 | |
1668 | |
1669 #ifdef MGA_ALLOW_IRQ | |
1670 if ( card->irq != -1 ) { | |
1671 int tmp = request_irq(card->irq, mga_handle_irq, SA_INTERRUPT | SA_SHIRQ, "Syncfb Time Base", card); | |
1672 if ( tmp ) { | |
1673 printk(KERN_INFO "syncfb (mga): cannot register irq %d (Err: %d)\n", card->irq, tmp); | |
1674 card->irq=-1; | |
1675 } else { | |
1676 printk(KERN_DEBUG "syncfb (mga): registered irq %d\n", card->irq); | |
1677 } | |
1678 } else { | |
1679 printk(KERN_INFO "syncfb (mga): No valid irq was found\n"); | |
1680 card->irq=-1; | |
1681 } | |
1682 #else | |
1683 printk(KERN_INFO "syncfb (mga): IRQ disabled in mga_vid.c\n"); | |
1684 card->irq=-1; | |
1685 #endif | |
1686 | |
1687 // register devfs, let the kernel give us major and minor numbers | |
1688 #ifdef CONFIG_DEVFS_FS | |
1689 snprintf(buffer, 16, "mga_vid%d", card_number); | |
1690 card->dev_handle = devfs_register(NULL, buffer, DEVFS_FL_AUTO_DEVNUM, | |
1691 0, 0, | |
1692 S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR, | |
1693 &mga_vid_fops, card); | |
1694 #endif | |
1695 | |
1696 } | |
1 | 1697 |
1698 /* | |
1699 * Main Initialization Function | |
1700 */ | |
1701 | |
1702 static int mga_vid_initialize(void) | |
1703 { | |
10743 | 1704 int i; |
1 | 1705 |
77 | 1706 // printk(KERN_INFO "Matrox MGA G200/G400 YUV Video interface v0.01 (c) Aaron Holtzman \n"); |
4594
ca6d74f72734
g550 memdetect fix - patch by Diego Biurrun <diego@biurrun.de>
arpi
parents:
4559
diff
changeset
|
1707 printk(KERN_INFO "Matrox MGA G200/G400/G450/G550 YUV Video interface v2.01 (c) Aaron Holtzman & A'rpi\n"); |
90 | 1708 |
10743 | 1709 for(i = 0; i < MGA_MAX_CARDS; i++) |
1710 { | |
1711 if (mga_ram_size[i]) { | |
1712 if (mga_ram_size[i]<4 || mga_ram_size[i]>64) { | |
1713 printk(KERN_ERR "mga_vid: invalid RAMSIZE: %d MB\n", mga_ram_size[i]); | |
1714 return -EINVAL; | |
1715 } | |
90 | 1716 } |
1717 } | |
10743 | 1718 |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
1719 if(register_chrdev(major, "mga_vid", &mga_vid_fops)) |
1 | 1720 { |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
1721 printk(KERN_ERR "mga_vid: unable to get major: %d\n", major); |
1 | 1722 return -EIO; |
1723 } | |
1724 | |
1725 if (!mga_vid_find_card()) | |
1726 { | |
61 | 1727 printk(KERN_ERR "mga_vid: no supported devices found\n"); |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
1728 unregister_chrdev(major, "mga_vid"); |
1 | 1729 return -EINVAL; |
1730 } | |
10743 | 1731 #ifdef CONFIG_DEVFS_FS |
1732 else { | |
1733 // we assume that this always succeedes | |
1734 dev_handle = devfs_register(NULL, "mga_vid", DEVFS_FL_AUTO_DEVNUM, | |
1735 0,0, | |
1736 S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IFCHR, | |
1737 &mga_vid_fops, mga_cards[0]); | |
1738 } | |
1739 #endif | |
1740 | |
1 | 1741 return(0); |
1742 } | |
1743 | |
1744 int init_module(void) | |
1745 { | |
1746 return mga_vid_initialize(); | |
1747 } | |
1748 | |
1749 void cleanup_module(void) | |
1750 { | |
10743 | 1751 int i; |
1752 mga_card_t * card; | |
48 | 1753 |
10743 | 1754 for (i = 0; i < MGA_MAX_CARDS; i++) |
1755 { | |
1756 card = mga_cards[i]; | |
1757 if(card) | |
1758 { | |
68 | 1759 #ifdef MGA_ALLOW_IRQ |
10743 | 1760 if (card->irq != -1) |
1761 free_irq(card->irq, &(card->irq)); | |
68 | 1762 #endif |
48 | 1763 |
10743 | 1764 if(card->mmio_base) |
1765 iounmap(card->mmio_base); | |
1766 if(card->param_buff) | |
1767 kfree(card->param_buff); | |
1768 #ifdef CONFIG_DEVFS_FS | |
1769 if(card->dev_handle) devfs_unregister(card->dev_handle); | |
1770 #endif | |
1771 | |
1772 kfree(card); | |
1773 mga_cards[i]=NULL; | |
1774 } | |
1775 } | |
1 | 1776 |
1777 //FIXME turn off BES | |
63 | 1778 printk(KERN_INFO "mga_vid: Cleaning up module\n"); |
5653
39115273d236
Mark Schreiber sent link to Marcus Sundburg patch to mga_vid, which enables
eyck
parents:
5623
diff
changeset
|
1779 #ifdef CONFIG_DEVFS_FS |
6086 | 1780 if(dev_handle) devfs_unregister(dev_handle); |
5764 | 1781 #endif |
9639
5422c37e6faa
selectable 'major', patch by Hans-Andreas Engel <engel@node.ch>
alex
parents:
9631
diff
changeset
|
1782 unregister_chrdev(major, "mga_vid"); |
1 | 1783 } |